Powering Toll Tags
Tue, 03/29/2011 - 5:31am
Case Study: Customized Coin Cell Holders for Automotive Toll Tags
ChallengeA leading manufacturer of toll tags recently approached MPD looking for a new battery holder to replace soldered-in batteries. The customer had two main problems with their current battery solution. First, coin cell batteries with solderable terminations are expensive, and second, they are not compatible with modern SMT manufacturing.
These problems seem quite common in the industry today. Coin cells with PCB pins are often nearly twice the price of a bare coin cell. In many cases, a bare coin cell along with a battery holder can be less expensive than a coin cell with leads, while still offering extremely strong battery retention and the added benefit of replacement ability. Furthermore, the soldering process of reflow ovens not only reduces batteries’ functionality, but sometimes damages cells and can even cause them to explode in extreme cases.
click to enlarge
The environmental specifications of a toll tag can call for broad operating temperature ranges, which is not surprising given that a car parked in the Arizona desert can reach nearly 85°C, while one in a Minnesota blizzard can be around -40°C. Humidity was another large concern, as toll tags are usually not hermetically sealed, so resistance to 95% relative humidity was another factor of consideration. Further areas of design concern were the fretting of the contacts over the expected 10 year lifespan of the toll tag, given the frequent shocks and vibrations a car encounters on the road, and the various ways in which consumers can accidentally damage any product, such as accidentally dropping it onto concrete.
The normal Glider design was modified to include a locking feature so that once the tray is inserted, it is permanently locked into the retainer. A more durable plastic with a higher temperature range was also necessary for the tray to account for the strict environmental specifications of the toll tag. Both the stronger plastic and locking feature will also enhance the lifespan of the customized Glider, and help it to withstand the wear and tear of years on the road.
Current Status* MPD engineers designed and created prototypes within days.
* New holder design meets customer’s target price point.
* Customized Glider is compatible with SMT manufacturing process.
* Custom packaging for automated assembly was made for holder.
* Design withstands extreme shocks and vibrations.
* Plastic tray functions within operating temperature range.
* Battery-loaded tray locks in permanently upon insertion.
* MPD is performing additional reliability studies for customer.
Memory Protection Devices, Inc. is an ISO 9001 certified manufacturer of battery holders and other electronic components.
For additional information visit: http:// www.MemoryProtectionDevices.com or email: