The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Audio Receivers

January 21, 2004 10:48 am | Product Releases | Comments

Star Micronics introduces the RBB-04A-PS and RBB-04B-PS audio receivers. Its wideband characteristics allow the RBB series to reproduce voice audio on all bands. Both the RBB-04A-PS and RBB-04B-PS are balanced-armature receivers that reproduce high quality 3D sound. The RBB-04A-PS is a 400 Ω receiver with nominal DC resistance of 236 Ω (+24 Ω)....


January 21, 2004 10:48 am | Product Releases | Comments

KOA introduces fixed carbon composition non-inductive, low-capacitance resistor series the RC 1/4 and RC 1/2 . A resistance range is available with the RC 1/4 and 1/2, from 1 Ω to 22 MΩ, tolerance available are ± 5% and ± 10% at 0.25 V and 0.5 V respectively, with a stability class of 10%, limiting element voltage of 250 V, 350 V, and isolation voltage of 100 V and 500 V....

Wideband Receiver

January 21, 2004 10:48 am | Product Releases | Comments

Analog Devices introduces a wideband receiver subsystem for cellular base stations. The AD6654 combines a 14-bit analog-to-digital (ADC) converter with a four- or six-channel digital downconverter (DDC). The core of the AD6654 ADC operates at more than 92 MSPS, while the digital functions performed by a DDC....


BNC Connectors

January 21, 2004 10:48 am | Product Releases | Comments

Nemal introduces a series of 75 Ω BNC connectors. the NE8000 series includes models for 75 Ω cables, all using industry standard crimping tools. Construction is user friendly, both in terms of installation and mating. Each connector package contains appropriate cable information as well as a diagram of strip dimensions....

Switch Matrix

January 21, 2004 10:48 am | Product Releases | Comments

Dow-Key introduces a CANbus-based coaxial switch matrix system with Ethernet, GPIB, RS-232, RS-485, and CANbus control interfaces. This product performs up to 1 GHz and is configures as a 1x32 (expendable to 1x64) switch matrix. The EWAB version of the 5039 switch matrix system can be accessed from anywhere via TCP/IP protocols on 10Base-T networks....

Test System

January 21, 2004 10:48 am | Product Releases | Comments

Keithlye introduces Model 2790-A SourceMeter Airbag Inflator DC electrical test system. The SourceMeter instruments combine sourcing, measurement, and signal routing capabilities required for insulation resistance and conductor (bridgewire) continuity testing in one package. The Model 2790-A cover a span of 1 MΩ to 10 GΩ....

SP3T Switch

January 21, 2004 10:48 am | Product Releases | Comments

California Eastern Labs introduces a SP3T (Single Pole Triple Throw) switch to it's offering of NEC GaAs MMIC switches. Developed to serve as a high power band selection device in CDMA dual band and GPS cellular phones, the UPG2031TQ operates at frequencies of 500 MHz to 2.5 GHz. Measuring 2.55 × 2....

DC/DC Controllers

January 21, 2004 10:48 am | Product Releases | Comments

Maxim introduces the MAX8553/MAX8554 DC-DC step-down controllers that ensure balanced current sourcing and sinking capability of ± 25 A. The MAX8553 generates 1/2 reference input voltage for VTT and VTTR voltages in DDR and RDRAM memory applications. The VTT and VTTR tracking voltages are maintained within 1% of 1/2 reference input voltage....


Analyzer Cards

January 21, 2004 10:48 am | Product Releases | Comments

Acqiris introduces Model AP240 and AP235 dual-channel reconfigurable analyzer platforms with Sustained Sequential Recording (SSR) firmware capability. The SSR firmware enhances the analyzers' ability to acquire, store and transfer sequential waveforms to a host PC at sustained trigger rates. The firmware options uses FPGA technology and enables the AP240/235 platforms' Data Processing Unit (DPU) to store the digitized waveforms in a "pi...

Radio and I/O Module

January 21, 2004 10:48 am | Product Releases | Comments

Phoenix Contact introduces the MCR-RAD, an integrated radio and I/O module designed to eliminate cable and conduit for analog and digital signals in harsh industrial environments. This module uses spread spectrum frequency hopping techniques to guarantee a license-free, interference-free link between remote devices and the control room....


January 21, 2004 10:48 am | Product Releases | Comments

AeroComm introduces the AC4490-1x1. the modules contain AeroComm's RF232 embedded protocol, which allows for plug-and-play installation. The 1x1's TTL serial interface provides bi-directional communication in point-to-point, point-to-multipoint, or multi-to-multi networks. Key specifications include: up to 115....

Common Mode Choke

January 21, 2004 10:48 am | Product Releases | Comments

API Delevan announces the CM6149 common mode-choke series, featuring an epoxy potted surface mount configuration. The potting shell is a molded, thermo-set epoxy material with molded in terminals that provide coplanarity. The core is a high permeability ferrite toroid. Series CM6149 is available in 13 inductance values ranging from 25 μH to 2,200 μH....

Coaxial Resonator Oscillators

January 21, 2004 10:48 am | Product Releases | Comments

Atlantic Microwave introduces coaxial resonator oscillators in the ACR series. The Series provides a stabilized fixed output frequency in the range 300 MHz to 3000 MHz with a minimum of +13 dBm of output power. Stability is achieved using a high Q ceramic resonator in a low noise silicon FET circuit with the output buffered to minimize frequency pulling....

Epoxy System

January 21, 2004 10:48 am | Wireless Design & Development | Product Releases | Comments

Tra-Bond 2254 is recommended for high temperature aerospace and electronics applications. Tra-Bond 2254 is a two-part thixotropic epoxy system that is color coded for easy handling and mixing at room temperature. This adhesive requires a heat cure, and bonds to ceramics, glass, metals and plastics....

Thin Sheets

January 21, 2004 10:48 am | Product Releases | Comments

Clarex precision thin sheets are manufactured using a specialized cell-casting method. Available in a range of thicknesses from 0.008 to 0.197 inches, the Clarex sheets are available with a hard coating on either one or both sides to prevent surface scratching....


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.