Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

WiMAX Hybrid Couplers Designed for High Performance Applications

January 22, 2008 5:53 am | Product Releases | Comments

Operates in 2.0 to 4.0 GHz range Average peak power 3 kW Rugged aluminum housing MECA Electronics Inc. introduces WiMAX Hybrid Couplers for high performance WiMAX applications between 2.0 to 4.0 GHz. These couplers are available with SMA-Female connectors and rugged aluminum housing for long lasting, reliable performance....

Soldering System Delivers High Power with Impressive Thermal Control

January 22, 2008 5:53 am | Product Releases | Comments

Better joint formation Raises power output Reduced tip erosion OK International introduces the PS-900 Soldering System. Controlled and powered by SmartHeat® Technology, the PS-900 provides users with exceptional capability to solder high thermal demand applications including lead-free solders, multi-layer boards, and large mass components....

Clock Generation Devices Improve Timing Accuracy

January 22, 2008 5:53 am | Product Releases | Comments

Sub-picosecond jitter quality Increased design flexibilityPLL-based ON Semiconductor has expanded its PureEdge™ high performance clock generation portfolio with the introduction of two best-in-class devices. The NB3N3002 and NB3N5573 are 3.3 V clock generators that create selectable Host Clock Signal Levels (HCSL) and sub-picosecond (ps) jitter quality clocks at 25, 100, 125 and 200 MHz....

Advertisement

Solid State Programmable Attenuator Modules Feature Compact Housings

January 22, 2008 5:53 am | Product Releases | Comments

Eubus GmbH introduces its model ATS0430-95 solid state programmable attenuator modules that feature compact and lightweight housings. Without the connectors, they measure 68否吇 mm, and they weigh 80 g. For RF connections, standard SMA (f) connectors are used. The modules are electrically switchable from 0 to 95....

FPGA Increases Verification Productivity

January 22, 2008 5:53 am | Product Releases | Comments

OneSpin Solutions GmbH announces its stand-alone 360 EC-FPGA sequential equivalence checker that is dedicated to the FPGA market. It supports all sequential optimizations performed by FPGA synthesis tools, enabling designers to verify functionality without disabling the advanced synthesis optimizations vital to achieving functional and performance goals....

Two FPGA Families Support QDRII/II+ Rates up to 750 Mbps

January 22, 2008 5:53 am | Product Releases | Comments

Lattice Semiconductor Corporation announces FPGA-based support for Quad Data Rate (QDR) II/II+ memory devices. The LatticeSC and LatticeSCM FPGA families support QDRII/II+ rates up to 750 Mbps. The high-speed QDR II and QDR II+ memory controller IP (intellectual property) is implemented in low power Masked Array for Cost Optimization (MACO) structured ASIC technology....

Optical Couplers Save Rack Space

January 22, 2008 5:53 am | Product Releases | Comments

M2 Optics, Inc. introduces its FiberSplit Micro Modules, a line of optical couplers, splitters and WDM products that are packaged in compact 2U modules that require 55 percent less space than standard LGX modules. They are functionally equivalent to LGX optical couplers, splitters and WDMs, but they feature 2U packages to allow 20 modules to fit into a 19 inches rack....

1 GHz VCO Operates at 1,000 MHz

January 22, 2008 5:53 am | Product Releases | Comments

Crystek Crystal Corporation announces its CVCO55CX-1000-1000 VCO that operates at 1,000 MHz with a control voltage range of 0 V~5 V. This VCO features a typical phase noise of -135 dBc/Hz at 10 KHz offset, and it has optimal linearity. The VCO is packaged in the industry standard 0.5 inchesࡦ....

Advertisement

L-band Oscillator for Cellular Base-station Applications

January 22, 2008 5:53 am | Product Releases | Comments

Good 2nd Harmonic Suppression Ultra-Low Phase Noise RoHS Compliant Z-Communications, Inc. introduces its lead-free, RoHS compliant oscillator in L-band (1680 to 1755 MHz). The CLV1717A features a phase noise performance of 㫻 dBc/Hz @10 kHz offset. The unique design covers the bandwidth between 2 to 4....

Surge Suppression Devices Protect Sensitive High Data Rate Equipment

January 22, 2008 5:53 am | Product Releases | Comments

Lower capacitance Expanded range Bi-directional protection Tyco Electronics has added new devices to its Raychem™ brand SiBar™ thyristor series. These new bi-directional transient voltage surge suppressors include an expanded range of available voltages, and lower capacitance to help protect high-speed ADSL/VDSL modems, Ethernet and Power-over-Ethernet and other high data rate communications equipment from damage from overvoltage ...

Modular RFID Expands in the Cabinet with One Gateway

January 22, 2008 5:53 am | Product Releases | Comments

Integrate into existing networks Add multiple channels 32 Kbyte memory Turck introduces a 2RFID module for its BL ident RFID system that complements its existing BL20 and BL67 network I/O systems. Up to 8 channels can be added to a single BL ident node, depending on the system requirements....

L-band Oscillator for Mobile Communications Applications

January 22, 2008 5:53 am | Product Releases | Comments

Z-Communications, Inc. announces its lead free, RoHS compliant oscillator (model CLV1548A-LF) in L-band (15111585 MHz), featuring ultra low phase noise performance of 𤩗 dBc/Hz at 10 kHz offset. The design covers the bandwidth between 2 to 4.4 V only, and it offers typical tuning sensitivity of 56 MHz/V....

Mixer Modules Feature High Image Rejection

January 22, 2008 5:53 am | Product Releases | Comments

Hittite Microwave Corporation announces two connectorized GaAs MESFET I/Q mixer modules for use in point-to-point radio, military, test equipment and sensor applications from 20 to 38 GHz. The HMC-C046 is a passive I/Q mixer module that provides 24 dB of image rejection, 42 dB of LO to RF port isolation and a consistent +23 dBm of input IP3 across the frequency range of 20 to 31 GHz....

Extension for Compliance Software Adds More Tests

January 22, 2008 5:53 am | Product Releases | Comments

Agilent Technologies, Inc. introduces an extension to its DisplayPort compliance test software for Infiniium DSO80000 series oscilloscopes. Software version 1.5 adds more controlled compliance tests and additional validation tests for link-layer compliance testing to the source and cable-end physical-layer tests provided in the original software....

EMI Suppression Devices for Ethernet Applications

January 22, 2008 5:53 am | Product Releases | Comments

Akros Silicon, Inc. announces its model AS1602 suppression device that provides a combination of system level EMC compliance and surge protection for Ethernet applications without impacting data transmission speeds. It integrates active chokes that provide 10 dB of additional common mode (CM) noise suppression over the entire Ethernet bandwidth (1 MHz to 125 MHz), allowing designers to meet Class B compliance (FCC Part 15 or CISPR22) effect...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading