Wireless Design & Development

Now on Wireless Design & Development
Welcome to Brainstorm!
Testing LTE
Wireless Base Stations Benefit from Signal Compression
How US Design Engineers Can Meet Global Legislation Challenges...

Search

Subscribe







Get wireless design headline news and products - Sign up now!
Product Release

E-mail for more information

Company's other products

E-mail to a colleague

See similar products

Printer friendly format

High Linearity Mixers

WJ Communications introduces two new highly linear mixers, the MH103A and MH203A. Both mixers are suitable for WCDMA, CDMA2000 and multi-carrier applications. Among the benefits of the MH103A and MH203A are high IP3, up to +34 dBm and a low conversion loss. These passive GaAs MESFET mixers provide high dynamic range performance in an SOIC-8 package.


WJ's monolithically integrated MH-series mixers combine high IP3 and low loss.

The MH103A

Product specifications include:

• RF frequency range — 1900 to 2200 MHz

• LO frequency range — 1600 to 2150 MHz

• IF frequency range — 50 to 300 MHz

• SSB conversion loss — 8.2 dB typical, 10.5 dB maximum

• Noise figure — 8.7 dB

• Input IP3 — +28 dBm minimum, +34 typical

• Input P1dB — +16 dBm typical

• LO-RF isolation — 21 dB minimum, 28 dB typical

• LO-IF isolation — 27 dB minimum, 37 dB typical

• RF-IF isolation — 12 dB minimum, 18 dB typical


The MH203A

Product specifications include:

• RF frequency range — 800 to 960 MHz

• LO frequency range — 1000 to 1310 MHz

• IF frequency range — 200 to 350 MHz

• SSB conversion loss — 7.3 dB typical, 8.5 dB maximum

• Noise figure — 7.8 dB

• Input IP3 — +28 dBm minimum, +31.5 typical

• Input IP3 — +30 dBm minimum, +34 dBm typical

• Input P1dB — +17.5 dBm typical

• LO-RF isolation — 25 dB minimum, 30 dB typical

• LO-IF isolation — 50 dB minimum, 60 dB typical

• RF-IF isolation — 25 dB typical


Absolute Maximum Rating

Operating case temperature for the devices is – 40° C to +85° C and storage temperature is – 65° C to +100° C. LO Power is +20 dBm and input IF/RF power is +20 dBm.


These devices use patented techniques to realize +34 dBm Input IP3 at an LO drive level of +17 dBm when used in transceiver applications as an upconverter or a downconverter. This single monolithic integrated circuit series does not require any external baluns or bias elements. Typical applications include frequency up/down conversion, modulation and demodulation for receivers and transmitters used in 3G UMTS systems.


WJ Communications, Inc.



WJ Communications, Inc.
http://www.wj.com

© 2012 Advantage Business Media




Advantage
Business Media
Part Search





Powered by


Terms Of Use


Latest Releases

High-Speed, Multi-Channel Serial FPDP Recorders Pentek introduced the Talon family of high-speed, multi-channel Serial FPDP turnkey recording systems: the Model RTS 2716 commercial rackmount, the Model RTR 2736 rugged portable, and the Model RTR 2756 rugged rackmount recorders.  


High Power PolyPhase Synchronous Boost Controller Linear Technology Corporation announces the H- and MP-grade versions of the LTC3787.  


Two New High Power Tx/Rx Switches Richardson RFPD announces immediate availability and full design support capabilities for two new high power Tx/Rx switches from M/A-COM Technology Solutions Inc.  












ECN Manufacturing.net Wireless Design & Development Product Design & Development MDT Medical Design Technology
Advantage Business Media

Top Stories and Headlines
EVERY DAY!

FREE Email Newsletter