Subscribe to Wireless Design and Development
View Sample

FREE WDD Email Newsletter

The Year That Was

December 5, 2011 7:55 am | by Alix Paultre | Comments

This year was an important one for WDD, with new roles and new people in our staff, changes in our editorial, and disruption in the marketplace. As we enter the New Year we look at it with great promise for both us as a publication and you as our audience. We will not only continue to serve you and our industry, we will do it in interesting and informative ways to keep you on top of wireless technology and the devices involved.


Industry Perspective: The New Age of Information Gathering in Healthcare

November 28, 2011 11:06 am | Comments

by Pietro Parravicini, CEO/President, Anoto Healthcare continues to be an industry where paper remains the primary source for capturing information. Currently, as many as 80 percent of physicians still rely on traditional pen and paper to gather patient data. It’s what they’re comfortable with and it’s what they’ve used for years.


Industry Perspective: What are the Three Top Reasons that Factories are Now Using Wireless on their Assembly Lines?

November 28, 2011 10:25 am | Comments

by Joseph Citrano, Global Product Manager, Honeywell Over the last several years, rapid evolution in industrial wireless networking has led to a monumental shift in the thinking of facility managers and design engineers, as they realize that using wireless in an industrial environment is safe, secure and reliable.


Brainstorm: Low Power Designs

November 28, 2011 9:24 am | by Todd Hanson, Director of Strategic Marketing and Wireless Solutions at Honeywell Sensing and Control | Comments

Question: What are the primary drivers for developing low power designs? Cost savings, movement to green, longer life for batteries? One of the most critical factors for component and board designers pursuing low power wireless designs is the overall power budget. By reducing the power demand of the radio, the designer can allocate more power to other things on the board, adding more features and capabilities, without having to go through a new cycle of development and testing.


Eye on Components: DC/DC Converters with Integrated Magnetics Simplify Point-of-Load Power in Wireless Communication Equipment

November 17, 2011 10:45 am | by Rich Nowakowski, Product Marketing Manager, Texas Instruments | Comments

Many architectural standards for communications equipment have fixed chassis sizes and power supply budgets. A point-of-load (POL) power solution that maintains high efficiency with a reduced size allows increased card density so that space savings translate into product differentiation. At the same time, designers must quickly solve technical problems during the development phase, and a simple power solution reduces burdens and brings peace-of-mind by allowing engineers to focus on their core competency.


Brainstorm: Renewable Energy

October 3, 2011 8:29 am | by Shan Morgan, Sr. Vice President Sales & Marketing, Elma Electronic | Comments

Question: What type of innovation must take place to provide the ability to increase the efficiency of renewable energy while reducing its cost? In regards to how the renewable energy market can become a more profitable business entity, we see it from a larger perspective than innovation at just the component, board or system level.


Software Design Tools

July 25, 2011 10:50 am | Comments

Question : How can effective use of software design tools improve the product development cycle and help the designer engineer get it right the first time? By: Frank Liu, Communications and Electronics Industry Marketing, MathWorks Successful product development teams are made up of engineers who can span multiple application domains and multiple design phases.


Palmer Wahl Introduces the C150 On-site Multifunction Calibrator

July 20, 2011 8:39 am | Comments

The ergonomically designed Wahl C150 On-site Multifunction Calibrator features unique built in “easy connect” terminals, portable and bench top flexibility, and easy to use intuitive embedded software. Fully protected with an external anti-shock rubber boot with IP 54 rating, it features five user-selectable languages,0.005% accuracy over 1 year, NIST traceability, and HART transmitter compatibility.


Art and Technology

July 20, 2011 7:21 am | Comments

 I must admit I am still surprised when I see technical people dismiss art as useless. Art is not only a pleasant esthetic, it is often essential to design. A recent online discussion about a pair of antique “singing bird” pistol-shaped music boxes reminded me of the issue. These devices not only had insanely complex bellows-and-gears works to accomplish the “singing bird” part, but in addition the “pistols” were inlaid with just about every precious thing you could cut and glue to something.

Customizing COTS Testing Systems

July 12, 2011 8:07 am | Comments

Turning Off-the-Shelf Components into an Application-Specific, Total Data Acquisition Solution By definition, the off-the-shelf modular instruments (VME, PXI, VXI, CompactPCI, PCI, etc.) used to create automated test and measurement systems are designed to be general purpose, programmable, and flexible enough to handle a variety of input ranges and types, speeds, and functions.


Three Terminal Filter Capacitors Simplify Designs, Reduce Component Counts

July 12, 2011 7:43 am | by Ron Demcko, Application Engineering Manager at AVX Corp | Comments

It is worthwhile to take some time and look at the role a three terminal FeedThru capacitor filter can play in today’s designs. Three terminal capacitors are now broadly accepted in designs ranging from satellites to cell phones, automobiles to SMART grid controllers.


Amplifier Test Software Simplifies Test and Certification of RF Amplifiers

July 6, 2011 11:25 am | Comments

Boonton has launched “Amplifier Test Bench”, a new software package that simplifies test and certification of RF Amplifiers. Amplifier Test Bench supports analysis of pulsed and linear amplifiers; furthermore it measures gain over frequency and gain over input power. The software supports both fast Boonton peak power meters 4540 and 4500B and a variety of standard generators.


Performance of LEDs

July 6, 2011 9:09 am | Comments

Question : How can today’s LEDs be improved to provide better performance (brighter, longer life) while at the same time lowering energy consumption? By: Brian Witzen Sr. Field Technical Manager  Sharp In commercial buildings, lighting accounts for a substantial portion of the energy budget and total energy cost.


CCI Solves Crucial Cell Site Interference Issues with Latest Analyzer Solutions

July 5, 2011 8:53 am | Comments

Leading provider of wireless base station enhancement products, Communications Components Inc. (CCI), has now launched its PiMPro family of analyzers in EMEA, which enable mobile network operators (MNOs) to remove the adverse affects of Passive Intermodulation (PIM) – a form of interference - from their networks, and prevent it from damaging quality of service (QoS) and customer experience.


New Measurement Solution For Optical Transmitter Compliance Testing Offers the Highest Bandwidth Optical Waveform Analysis and Increased Accuracy

June 29, 2011 11:12 am | Comments

Agilent Technologies introduced a new measurement solution for optical transmitter compliance testing on the Agilent 86100D digital communications analyzer. The solution offers the industry’s highest bandwidth optical waveform analysis and increased accuracy. The DCA provides a new approach, known as system impulse response correction, or SIRC, which enables multimode optical receivers with bandwidths in excess of 25 GHz and single-mode receivers with near 100-GHz bandwidths.



You may login with either your assigned username or your e-mail address.
The password field is case sensitive.