Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

MC-Card Connectors

April 30, 2001 6:15 am | Product Releases | Comments

RF Connectors has added two new special application connectors to its broad line of sub-miniature coaxial connectors. Designed for use in cellular devices where broad and chassis space is limited, these right-angle connectors mate with PCB and card mounted jacks. The RMC-6010-A connector is available for RG-178/U and the RMC-6010-B is designed for use with the RG-174/U, RG-188/U and RG-316/U cables....

Miniature Diplexer filters UMTS Signals

April 30, 2001 6:15 am | Product Releases | Comments

The miniature "IMD free" W2446D diplexer is designed for video reception and transmission in the UMTS band. Standard 43 dBm input test signals produces less than -100 dBm of IMD signals. 60 MHz DCS/UMTS Bw, (2110-2170 MHz) Insertion loss is < 1 dB and return loss is better than -17 dB. Tx to Rx isolation > 65 dB....

PC Board-Level Indicators

April 30, 2001 6:15 am | Product Releases | Comments

Lumex is announcing its new line of printed circuit (PC) board-level indicators utilizing the latest light-emitting diode (LED) chip technologies. These devices are being offered in more styles, colors, and options than previously available from any supplier. They can be used as board-level status indicators and fault indicators, warning or alarm lights, circuit fault or status indicators, circuit troubleshooting indicators, as post lightin...

Advertisement

1430 - 1930 MHz Low Noise VCO

April 30, 2001 6:15 am | Product Releases | Comments

1430 - 1930 MHz Low Noise VCO ideal for satellite modems, featuring excellent phase noise, low cost and compact package, – 40 to 85 ° C operation. Z-Communications, Inc. announced an advancement in Voltage Controlled Oscillator technology with the introduction of the V674ME03. The V674ME03 is sure to find a home in any satellite system where low noise performance as well as broad bandwidth is required....

Additional Frequencies for Surface Mount Planar Antenna

April 30, 2001 6:15 am | Product Releases | Comments

A planar antenna from Linx Technologies is now available in two additional frequency ranges. This antenna utilizes a proprietary grounded-line technique to extract performance from a small surface mount antenna. Dubbed the "Splatch," the antenna is highly immune to proximity effects, making it ideally suited to handheld applications such as remote controls, pagers, and alert devices....

Molded Grommeting

April 30, 2001 6:15 am | Product Releases | Comments

Micro Plastics announced a new product line of molded grommeting. This flexible grommeting is molded in nylon 6/6 and can be used for round, square, or irregular shaped holes to protect wires and tubing from sharp panel edges and knock outs. It is attached quickly and easily using no special tools....

High-Density, Hot-Swap Rectifiers

April 30, 2001 6:15 am | Product Releases | Comments

The new Meridian RMP Series from UNIPOWER Telecom produces up to 200 amperes at 27.2 V DC or 100 amperes at 54.4 V DC from a 23-inch shelf housing up to four rectifier modules. The individual rectifier modules each produce 50 amps at 27.2 V or 25 amps at 64.4 V with a power density of 6.4 watts per cubic inch....

Surface Mount Voltage Controlled Oscillator

April 30, 2001 6:15 am | Product Releases | Comments

ILSI America has reduced the ceramic package size of its surface mount TCVCXO 1707 Series oscillators to 5 × 3.2 mm. The oscillator covers a frequency range of 12.6 to 19.8 MHz with a stability of ± 2.5 ppm over an operating temperature range of – 20 ° C to 75 ° C. Pullability is 5 - 15 ppm with a control voltage of 1....

Advertisement

Analog Data Capture Module

April 30, 2001 6:15 am | Product Releases | Comments

TDL Technology announced the release of their Model ADC-405, a new analog data capture module designed for field data collection using a laptop or notebook host computer. It features a 12-bit output word at a maximum sampling rate of 69 kHz. The built-in rechargeable batteries provide power line independence during operation....

Thermally Conductive Epoxy Adhesive

April 30, 2001 6:15 am | Product Releases | Comments

TRA-BOND 8-2 from Tra-Con offers a combination of strength and thermal conductivity with properties down to – 90 ° C. This epoxy can be provided in a custom bipax or pre-mixed and frozen. TRA-BOND 8-2 also has the ability to bond difficult-to-bond metals, such as gold, silver, brass, and solder....

Coaxial Relay Module

April 30, 2001 6:15 am | Product Releases | Comments

The Model 7000 coaxial relay module form Matrix Systems provides switching continuity over a wide range of critical and severe environmental conditions. Features include 2 to 24 throws, DC up to 800 MHz depending on the number of throws, continuous shield continuity, and switchpoints that are individually field replaceable....

DC/DC Power Modules

April 30, 2001 6:15 am | Product Releases | Comments

The latest high current DC/DC power modules from Ericsson Microelectronics extend the PKL 4000 family with models designed for the convergent telecommunications marketplace. The 1.8 V, 60 A PKL 4118 PIT and 1.8 V, 50 A PKL 4918 PIT models offer high efficiency (87% at 60 A), and at 37.2 W/in 3 , these converters offer double the power density of other half-brick modules....

Surface Mount Oscillator Features Reduced Size

April 30, 2001 6:15 am | Product Releases | Comments

Fox Electronics has introduced a new surface mount oscillator that features package size to meet the demand created by severely reduced space restrictions for the wireless and portable markets. The new Fox F500 Series SMD oscillator measures 5 × 3.2 mm with a low profile of 1.4 mm, making it ideal for use in micro-miniaturized versions of wireless and portable electronic devices....

Extended Access Screw Terminal

April 30, 2001 6:15 am | Product Releases | Comments

Keystone Electronics offers a new line of elongated screw terminals for those applications that require connections to be made high above the PC board. Typical applications are power supplies, multi-board stacks, and where termination must be made outside the product. The extra height makes access to this screw terminal easier than conventional screw terminals, a particular advantage in high density applications....

Thermally Conductive Gap Fillers

April 30, 2001 6:15 am | Product Releases | Comments

Stockwell Rubber Company announced the availability of die cut parts from two newly developed thermally conductive gap filler materials. These two new compounds provide an effective path between heat sources and heat sinks in a variety of electronic and telecommunications applications. TC2000 Gap Filler provides a means of making intimate contact between components and heat sinks where a large gap is generated in assembly design or where ...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading