Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Coaxial Matrix Switch

June 4, 2002 9:36 am | Product Releases | Comments

The reconfigurable CANBus-based integrated switch matrix (P/N 13D12-480822T) is equipped with a built-in Ethernet port. This switch matrix is based on the standard design of the SP12T switch with internal termination. The 13D12-480822T performs up to 18 GHz. This Ethernet (802.3) based switch matrix can be easily accessed from anywhere in the world via TCP/IP protocols on 10BaseT networks....

Integrated Turnkey System

June 4, 2002 9:36 am | Product Releases | Comments

The addition of fully integrated factory configurations for hybrid DC/RF/optical switching to the System 40 product line allows users to specify systems with configurations that include cards from Keithley's Model 7090 family of optical switching products and related accessories. These options make the System 400 capable of virtually any type of switching application involving DC voltages and currents, RF, microwave, light, digital signals,...

Enclosures for I/O Devices

June 4, 2002 9:36 am | Product Releases | Comments

Hoffman has added ten new enclosure models to the INLINE® Instrumentation Enclosure Series. The enclosures are designed to meet the specifications of newer I/O devices. Full-length mounting brackets welded to the top and bottom of the enclosure provide flexible enclosure mounting capabilities....

Advertisement

Dual Resistor/Capacitor Snubber Network Series

June 4, 2002 9:36 am | Product Releases | Comments

Electronic Concepts announced a series of film-foil capacitors that have externally mounted resistors for direct connection to standard ultra fast rectifiers in MD3CC packages, for snubbing high frequency switching transient in switch-mode power supplies. The RCN Snubber Network offers superior performance because of a direct mounting feature, which aligns the three terminals with the rectifier package....

High Frequency Switches

June 4, 2002 9:36 am | Product Releases | Comments

RLC introduced a new line of high frequency switches that are DC to 50 GHz. These switches are single-pole, double throw. Impedance is 50 ohms. Failsafe is 12 V DC at 250 mA nominal, 28 V DC at 140 mA nominal. Latching is 12 V DC at 120 mA nominal 28 V DC at 60 mA nominal. Connectors are 2.4 mm. Power Connectors are feed through solder lugs....

Low Capacitance Diode Array

June 4, 2002 9:36 am | Product Releases | Comments

The ET108 is a low capacitance steering diode array designed to protect circuit applications with a bus voltage of less than 25 volts from the effects of Electrostatic discharge (ESD). It is designed for the protection of four ISDN S-interface and I/O ports for microcontrollers. With a low input capacitance, per line, of less than 6 pF, plus two diodes (pairs) for each line, the ET108 provides both positive and negative transient protecti...

Dual Matrix

June 4, 2002 9:36 am | Product Releases | Comments

Model 12429 Dual 32 × 32 RS-422 matrix is applicable for automatic test equipment and multiple fan-out control. The matrix routes two RS-422 pairs of 32 inputs to 32 outputs. Model 12429 is a full duplex, embedded intelligent controller with crosspoint verification and RS 232C and IEEE-488 interfaces....

Custom Keyboards

June 4, 2002 9:36 am | Product Releases | Comments

Custom keyboards and keyboard assemblies from Laube Technology can be designed and produced for various instruments. Switch technologies available are conductive, rubber, membrane — snap dome, polyester dome or flat membrane or hybrid combinations. Complete turnkey solutions for keypads and keyboard assemblies are also available....

Advertisement

Miniature Bandpass Filter

June 4, 2002 9:36 am | Product Releases | Comments

The LTF2012B-F2R4B multilayer ceramic bandpass filter has a 0805 footprint (2.0 × 1.2 mm) and a low profile of 1.0 mm. Manufactured with a proprietary ceramic material and process, this filter delivers exceptional reliability and performance to 2.45 GHz platforms over a full temperature range of – 55°C to +125°C....

Digital Converters

June 4, 2002 9:36 am | Product Releases | Comments

The VersaCOMM™ family of digital converters, the AD6623, is a 104 MSPS, four-channel transmit signal processor (TSP) designed for multi-mode, multi-standard wireless base station architectures. The AD6623 is used in the transmit signal path to process the signals from a general purpose DSP for input to a high-speed digital-to-analog converter....

Signaling Tester for 3G WCDMA Mobile Stations

June 4, 2002 9:36 am | Product Releases | Comments

Anritsu introduces the MD8480A WCDMA Signaling Tester, a solution that is used for verification of 3GPP WCDMA mobile stations and mobile station chipsets. Simulating a WCDMA base station, the MD8480A is used in the development phase to verify the modulation and demodulation function of the mobile station or chipset, confirm call processing functionality between the base station and mobile station, and to simulate applications....

F Capacitors

June 4, 2002 9:36 am | Product Releases | Comments

Evox Rifa has announced the latest version of their series PHE840 X2 capacitors. Smaller sizes are offered across the range and the maximum C-value has been increased to 10 μF. Applications for the highest C-values include AC motor drives, power inverters and high power SMPS. The smaller sizes now offered allow for critical footprint savings in any electronic device requiring X2 capacitors....

Latching Relay

June 4, 2002 9:36 am | Product Releases | Comments

Aromat introduced its compact DQ relay with 30 amps. The DQ measures 38 mm L × 29 mm W × 17.3 mm H. With one or two coil latching available, this relay helps conserve energy. The DQ is designed with high insulation distance of at least 8 mm. Contact arrangement is 1 Form A. The DQ is cadmium and lead free and complies with established safety standards (UL/CSA and VDE approved)....

Directional Detectors

June 4, 2002 9:35 am | Product Releases | Comments

Model 201040013 (13 dB nominal coupling) covers the entire frequency band of 1 - 40 GHz. Frequency sensitivity (with respect to output) is ± 1.7 dB minimum. Directivity is 14 dB minimum 1 - 20 GHz and 10 dB minimum from 20 - 40 GHz. Maximum VSWR is 1.5, 1 - 20 GHz and 1.7, 20 - 40 GHz. Maximum insertion loss (includes coupling) is 1....

Coaxial Connector Interface

June 4, 2002 9:35 am | Product Releases | Comments

The 1.0/2.3 coaxial connector interface is an effective way to save space in electronic assemblies. Designed per CECC 2230 and DIN47247, this connector series is ideal for telecommunications applications, especially in high speed switching equipment operating at frequencies up to 4 GHz. The push-pull 1....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading