Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Capacitors for EMI Filtering

September 11, 2002 5:17 am | Product Releases | Comments

Johanson Dielectrics introduces a new ceramic filter/decoupling capacitor utilizing X2Y® technology. The X2Y design incorporates common shielding electrodes that form a Faraday Cage around the standard capacitor. The addition of the common electrode creates two matched or balanced capacitors enabling simultaneous line-to-line and line-to-ground filtering....

Digitally Tuned Oscillators

September 11, 2002 5:17 am | Product Releases | Comments

Signal Technology Corporation, Arizona Operation announces a standard line of Digitally Tuned Oscillators (DTO) developed primarily for military digital receiver front ends for radar applications and for Electronic Warfare (EW) simulator markets. The DTO design incorporates a custom integrated assembly architecture using a dual source approach with hybrid and monolithic multi-function microwave and control component circuitry to achieve the...

MEMS Switch

September 11, 2002 5:17 am | Product Releases | Comments

Coventor's MEMS switch technology enables design engineers to create new wireless products featuring low insertion loss and high isolation capabilities in a smaller package. The MEMS technology platforms will enable the fast design and prototyping capabilities necessary to bring handset and microwave communications systems to market quickly....

Advertisement

Quad Hybrids

September 11, 2002 5:17 am | Product Releases | Comments

Response Microwave announces the availability of its Slimline series of low package volume, formable 3 dB quadrature hybrids. Operating at incremental bands between 100 MHz up to 2 GHz, these new devices are available with SMA female connectors standard and alternate interfaces upon request. They offer typical insertion loss of 0....

Power Module

September 11, 2002 5:17 am | Product Releases | Comments

The FHW500R is an ultra high efficiency 500 W DC/DC converter for use in powering wireless base stations and other high current 24 - 28 V DC applications. The FHW500R operates over an input voltage range of 36 V DC - 75 V DC (48V nominal) to deliver a single output of 24 - 28 V DC in an industry standard full brick package....

Flash Memory

September 11, 2002 5:17 am | Product Releases | Comments

Maxwell Technologies, Inc. announced its 29F0408 high-density 32Mb FLASH memory. The 29F0408 is radiation characterized for both SEL (60 MeV/mg/cm2) and SEU (37 MeV/mg/cm2). This high-density, low-power solution is offered in a compact design for use in space applications, where size and weight are crucial....

Voltage Regulator ICs

September 11, 2002 5:17 am | Product Releases | Comments

Torex Semiconductor Europe has introduced the XC6205 and the XC6209, two high-speed positive voltage regulator. The XC6209's low power consumption (25(A typical) and very high speed of operation makes it ideal for Bluetooth and other RF applications. Operating down to 0.9 V, the XC6205 is aimed at low voltage DSPs....

Interchangeable Inserts

September 11, 2002 5:17 am | Product Releases | Comments

Johnstech announces an innovative, interchangeable technology to meet grounding and thermal needs. These six interchangeable inserts work in both Johnstech's Pad Series products for LFCSP and MLF-type packages and its Leaded Series 2 mm products for QFP, SO, and other leaded packages. These inserts, made of either Torlon or Copper, can be used with either Johnstech's rigid S-shaped contact or its center body contact (CBC) technology....

Advertisement

SiGe Driver/Receiver

September 11, 2002 5:17 am | Product Releases | Comments

The NBSG16VS is a 2.5V / 3.3V Silicon Germanium (SiGe) differential driver/receiver with a variable output swing that can be programmed to provide output amplitudes ranging between 100 mV to 700 mV peak-to-peak. The NBSG16VS delivers ultra low jitter, improved signal integrity, a small footprint and optimum performance for 10 Gbps data rates....

Spectrum Analyzer

September 11, 2002 5:17 am | Product Releases | Comments

IFR, an Aeroflex company, announces a 13 GHz spectrum. Key applications for the 2394 spectrum analyzer are mobile handset production test, handset repair verification and base station transmitter testing. The 2394 13 GHz spectrum analyzer is lightweight and portable with a large color LCD display....

Power Distribution Unit

September 11, 2002 5:17 am | Product Releases | Comments

The DC SMARTstart is used to monitor and control power for secondary distribution and incorporates both manual and remote operation. DC SMARTstart units feature independent programmable power-on and off sequencing delays that manage the level of inrush current transients. The unit will control and monitor two sets of six independent 4-amp loads....

Rubidium Frequency Standard

September 11, 2002 5:17 am | Product Releases | Comments

The Model 2955AR Rubidium Frequency Standard contains a Direct Digital Synthesizer locked to the internal Rubidium oscillator providing any frequency between 100 Hz and 30 MHz in 1 μHz steps with atomic clock accuracy and stability along with fixed outputs at 10 MHz, 1 MHz (5 MHz optional), and 1 pps....

Crystal Oscillators

September 11, 2002 5:17 am | Product Releases | Comments

The F4100 Series includes two new oscillators. The F4107 offers a stability of 䔳 ppm and the F4109 offers a stability of 䔮 ppm. The two 3.3 V HCMOS oscillators have a standard operating temperature range of 㪢°C to +70°C (14°F to 158°F), with an optional 㫀°C to +85°C (㫀°F to 185°F) range available for the F4107....

Varactor Tuning Diodes

September 11, 2002 5:17 am | Product Releases | Comments

The 3022 Series of high ratio, hyperabrupt, varactor tuning diodes are designed to control crystal oscillator frequency with a DC bias voltage that can be varied from ל.3 to נ.0 volts. The capacitance variation (C/V) of the diode over this range is approximately a factor of 10/1. The series is available in industry-standard packages including SOT-23, SOD-323 and SOD-523 (SC-79, SC90), and are designed for surface mount application...

Coaxial Attenuator Module

September 11, 2002 5:17 am | Product Releases | Comments

Model 61053A can be used as a stand-alone attenuator or mounted in Matrix Systems' assemblies and may be used with the 70000 Series relay modules to provide system signal level adjustments. Features include 0 - 63.5 dB; DC - 100 MHz; attenuation steps 0.5 dB; RS-232/IEEE-488 control available; low EMI; field replaceable attenuation elements; ....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading