Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Analog Switches and Multiplexers

June 18, 2002 12:41 pm | Product Releases | Comments

The DG9400 series from Siliconix has low injection charges of 5 pC down to 1 pC. Speed and throughput with the devices are improved, with bandwidth up to 250 MHz. The devices in the series include the DG9411, DG9431 and DG9461 SPDT analog switches and two dual SPST analog switches (DG9232, DG9233), all rated for low voltage operation from 2....

Low Cost Spectrum Analyzer

June 13, 2002 12:14 pm | Product Releases | Comments

SA3000 is a compact, cost-effective, PC-based instrument covering the 2.4 GHz ISM band. The device identifies optimal locations for wireless equipment and alerts installers to potential interference. Operation is menu-driven, and on-screen displays are easy to read and understand. When combined with a laptop computer, SA3000 enables comprehensive remote site surveillance at virtually any location....

Closed Loop Performance Analysis

June 13, 2002 12:14 pm | Product Releases | Comments

Spirent's AirAccess EV is an integrated test platform for CDMA2000 1xEV-DO Access Terminals (ATs). Feature-rich, real-time network emulation enables both functional and protocol testing of ATs that exploit CDMA2000 1xEV's high-speed, high capacity wireless Internet capability. The closed loop system combines AirAccess EV, TAS4500 and SB-600 to provide high-speed data traffic analysis over an emulated CDMA network with RF impairments....

Advertisement

Diffused Infrared is Lightening Infrared Future

June 13, 2002 10:43 am | Product Releases | Comments

By Uri Kanonich, Infra-Com Ltd. "Hey dad, can you do me a favor and turn on the TV?" This was the kick-off for the first 'killer application' in the short-range wireless communication market — the TV Infrared remote control. About 20 years later, an installed base of almost 500 million IrDA ports are enabling Infrared short-range wireless communication between laptops, PDAs and cellular phones....

SMD VCXO for SONET

June 10, 2002 11:35 am | Product Releases | Comments

The 7311E series is a voltage controlled crystal oscillator (VCXO) for wavelength division multiplexing (WDM) applications. The 7311E meets standards with excellent pulse recurrence properties. Measuring 9.6 mm W × 11.4 mm L × 3.9 mm H, it incorporates a 155 MHz fundamental crystal, bipolar oscillator circuit, and a selected multiplier/filter circuit....

Booster Amplifier

June 10, 2002 11:35 am | Product Releases | Comments

Miniature Model 120, a full duplex booster amplifier, provides up to 20 dB of gain with an output level of 25 dBm. The uplink and downlink gains are independently adjustable from 0 dB to 20 dB....

Frequency Hopping Radio

June 10, 2002 11:35 am | Product Releases | Comments

RF Neulink introduces the SS-900, a 900 MHz frequency hopping radio for the ISM band. This package comes in a DIN rail mount with a RS-232 serial data port. No license required, full 1-watt RF output. Designed for industrial and SCADA operations this unit will pass data transparently as well as MODBUS and Allen-Bradley protocols....

Common Mode Filters

June 10, 2002 11:35 am | Product Releases | Comments

The CSF Series of common mode filters are specifically designed for power applications. Features include no gap "H" ferrite cores; continuous inductance and SFR flow; four sizes with vertical or horizontal core mounting with industry standard footprints; inductance values 1 MHz to 120 MHz; maximum DC currents ....

Advertisement

High Voltage Contact Lead Assemblies

June 10, 2002 11:35 am | Product Releases | Comments

This line of #12 gauge, rear release high voltage contact lead assemblies are for MIL-C_38999 Series, I, III, and IV connectors. The Hi/Mate contacts are miniature high voltage electrical contact assemblies and are supplied terminated with Hi Voltage FEP cables for added factory reliability. The insertion and removal procedures of these contact lead assemblies utilize the same tools as any standard #12 38999 series connector contact....

Dual-Band Power Amplifier

June 10, 2002 11:26 am | Product Releases | Comments

The RFS P5910 is a single-chip power amplifier targeted for network interface cards (NIC) that can address both 802.11a and HiperLAN/2 at 5 GHz as well as 802.11b and 802.11g at 2.4 GHz. The part is suitable for orthogonal frequency division multiplexing (OFDM) technology in the two U-NII sub-bands from 5....

Test Path to 3G Leads to Flexibility and Multi-standard Instrumentation

June 6, 2002 10:43 am | Product Releases | Comments

By Yuenie Lau, Anritsu Company The migration to 3G (Figure 1) is littered with a variety of standards, none of which is the definitive answer that will be used globally. As we have gone from 2G to 2.5G formats, designers have been faced with the challenge of developing products for multiple standards....

LSE Free Film

June 4, 2002 9:36 am | Product Releases | Comments

MACbond® IB-2180 is a double-side tape version of MACtac's low surface energy (LSE) free film, IF-2090, which is able to bond to low energy surfaces. The IF-2090 series is ideal for bonding to polypropylene, polyethylene and powdered-coating surfaces. IB-2180 uses the LSE adhesive system combined with a polyester film carrier for dimensional stability....

Miniature Cavity Filter

June 4, 2002 9:36 am | Product Releases | Comments

Model W2641F bandpass filter offers very sharp rejection to nearby interfering signals from radar and other ISM inband services. The 80 MHz bandwidth allows very high data rates while offering a low 0.5 dB insertion loss. With a 1.4:1 VSWR, the filter permits the use of low noise amplification to overcome cable loss....

Low Voltage Diode Array

June 4, 2002 9:36 am | Product Releases | Comments

The SR2.8 steering diode array and TVS combination protection device has low voltage (2.8 V) and low capacitance (5 pF). Designed to protect two line pair, or four data or transmission lines, the SR2.8 is ideal for low voltage circuit applications where operating currents are less than 100 mA. In addition, the SR2....

Shield Bead Ferrite Chokes

June 4, 2002 9:36 am | Product Releases | Comments

The Prem SPG-100 and SPG-101 are designed to attenuate EMI and other unwanted signals in a circuit without contributing to power losses at lower frequencies or DC. These two units offer vertical-mount arrangement. Impedances range from 20 Ω to 50 Ω and are obtained over frequencies ranging from 1....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading