Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Crystal Oscillator

June 4, 2002 7:57 am | Product Releases | Comments

The F4500 offers an input voltage of 1.8 V ± 5%, with an operating voltage as low as 1.6 V. The F4500 Series also provides greater efficiency both in system design and in the operation of the oscillator. Greater system efficiency is achieved through the oscillator's direct connection to the system's processor, which eliminates the extra circuitry previously needed to match the processor's voltage to the oscillator's voltage....

Reference Design

June 4, 2002 7:54 am | Product Releases | Comments

     Infineon introduces the Telematics Communication Gateway™ reference design that integrates mobile phone, wireless networking and global positioning technology.      The TCG reference design combines up to three wireless subsystems on a single module to create a flexible platform with the capability to support multiple applications....

Dual Mode Card Reference Design

June 4, 2002 7:54 am | Product Releases | Comments

     Intersil Corporation and Silicon Wave, Inc. announced availability of a mini-PCI card reference design that allows simultaneous operation of Bluetooth and Wi-Fi (802.11b) wireless connectivity in notebook PCs and other computing.      The dual-mode mini-PCI card reference design incorporates Blue802 technology that provides simultaneous optimal operation of Bluetooth and Wi-Fi wireless functional...

Advertisement

Triple Band Radio Transceiver

June 4, 2002 7:54 am | Product Releases | Comments

RFMD introduces the POLARIS™ TOTAL RADIO™ solution, a highly integrated, triple-band radio transceiver plus power amplifier module for GSM/GPRS applications with EDGE receive capabilities. The POLARIS transceiver performs all RF functions with less than 20 components and provides handset manufacturers the benefits of reduced component count, flexible baseband interfaces and lower cost of implementation....

MACtac Technical Products

June 4, 2002 7:49 am | Product Releases | Comments

LSE Free Film      MACbond® IB-2180 is a double-side tape version of MACtac's low surface energy (LSE) free film, IF-2090, which is able to bond to low energy surfaces. The IF-2090 series is ideal for bonding to polypropylene, polyethylene and powdered-coating surfaces. IB-2180 uses the LSE adhesive system combined with a polyester film carrier for dimensional stability....

Power Integrations, Inc.

June 4, 2002 7:49 am | Product Releases | Comments

Power Supply Software      PI Expert version 4.0 is PC-based software that offers an intuitive user interface, fast execution speed and new productivity enhancing features. PI Expert automates the design of single and multiple output flyback power supplies using TOPSwitch ® and TinySwitch ® product families....

Prem Magnetics, Inc.

June 4, 2002 7:49 am | Product Releases | Comments

Shield Bead Ferrite Chokes      The Prem SPG-100 and SPG-101 are designed to attenuate EMI and other unwanted signals in a circuit without contributing to power losses at lower frequencies or DC. These two units offer vertical-mount arrangement. Impedances range from 20 Ω to 50 Ω and are obtained over frequencies ranging from 1....

Schurter Inc.

June 4, 2002 7:49 am | Product Releases | Comments

Power Entry Module      The EF series is UL rated up to 20 amps at 250 volts. The power inlet is according to IEC/EN60320-1/C20 and the circuit breaker is according to IEC/EN 60934 and UL 1077 (for equipment). The new combination offers advanced functionality and higher power ratings over conventional AC power entry modules....

Advertisement

Micro Plastics, Inc.

June 4, 2002 7:49 am | Product Releases | Comments

Two Piece Fastener      The "Dome and Tack" molded, two piece Nylon fastener features a locking mechanism, which is totally enclosed to prevent tampering. These "Dome and Tack" fasteners are for use in a pre-punched hole, and there will be no sharp exterior edges after the part is assembled....

D Technologies, Inc.

June 4, 2002 7:49 am | Product Releases | Comments

Surface Mount Inductors      Offering DC resistance values down to 0.028 Ω, the 2400 and 2600 series inductors are ideal for switching power supply designs, power line filter circuits, and other applications where high saturation currents and miniature footprints are required....

LEDtronics, Inc.

June 4, 2002 7:49 am | Product Releases | Comments

High Energy LEDs      The 3 mm (T1) white discrete LED maximizes the options available to engineers and designers. Part number L120CW3KB-22D, water-clear, 8000K 3mm (T1) white LED integrates a SiC/GaN diode with optical grade epoxy to produce a 3500 mcd illumination at 20 mA that is visible even in direct sunlight....

ATC-Frost Magnetics Inc.

June 4, 2002 7:49 am | Product Releases | Comments

Class 2 Transformer      ATC-Frost introduced a new class 2, 95 V A transformer with 120 V input voltage and 24 V output. It is also available in other voltages. All are UL and cUL approved to UL1585. Other Class 2 transformers are available from 5 V A in different voltages and with various mounting configurations....

DATEL, Inc.

June 4, 2002 7:49 am | Product Releases | Comments

AC/DC Power Supplies      Model DMS-PS-CM Series of AC/DC instrumentation power supplies are ideal for driving modern transducers, digital panel meters, operational amplifiers, and data acquisition components. The series accepts universal AC inputs (85 - 264 V AC @ 47 - 63 Hz) and deliver +5 V DC , +12 V DC and/or +24 V DC outputs from single, dual or triple-output configurations....

UNIPOWER North America

June 4, 2002 7:49 am | Product Releases | Comments

600 W Power Supply      The Quick-Set PowerCassette , with model numbers starting with PCH-S and TPCH-s, come in both chassis mount and hot-swap versions. The units provide up to six outputs, including a 5 V DC, on-ampere independent standby output. Maximum continuous power is 600 watts, and available output voltages are from 1....

Anderson Power Products

June 4, 2002 7:49 am | Product Releases | Comments

Connectors      The 2x5 configuration Powerpole® Pak connector offers panel mount and latching cable configurations. The new Powerpole accommodates up to 10 of Anderson's PP 15/45 housings. The 2x5 Pak features cable strain relief and has the ability to professionally panel mount PP15/45 connectors while maintaining a streamlined, professional appearance....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading