Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

IC Test System

January 27, 2003 9:34 am | Product Releases | Comments

The IC240 is a "bare bones" bench top test system that combines a powerful, simple to modify software interface with a configurable hardware core that allow test engineers to easily customize the system for their unique testing applications. The IC240 has a prototyping board that comes with decoder, buffers and software drivers that allow fast bread-boarding for their custom instruments....

HCMOS Oscillators

January 27, 2003 9:34 am | Product Releases | Comments

The F330 Series of 3.3 V HCMOS oscillators are available in frequency stabilities of ± 100, ± 50, ± 25, and ± 20 ppm and in frequency ranges from 1.8 to 50.0 MHz (1.8 to 32.0 MHz at 20 mA; 32.0 to 50.0 MHz at 25 mA). Standard operating temperature for the series is – 10°C to 70°C, with extended temperature ranges of – 40°C to 85°C available on some models....

Signal Modules

January 27, 2003 9:34 am | Product Releases | Comments

Model 5D70 is a single-input, dual-output, software-programmable conditioner for input of pressure, force, torque, weight, and other variables measured by DC-excited strain gage transducers. Self-contained in a hard aluminum case, the Model 5D70's analog design yields excellent signal stability and accuracy over a wide range of sensor inputs (configurable sensitivity ranges from 0....

Advertisement

Directional Antenna

January 27, 2003 9:34 am | Product Releases | Comments

The InWave Series indoor directional antenna is designed for applications operating in the 2400 to 2483 MHz IMS frequency range. The lightweight antenna has an aesthetic low-profile design and is suitable for transmit and receive functions for 2.4 GHz WLANs and 802.11 in-building wireless access points....

SMD Power Inductors

January 27, 2003 9:34 am | Product Releases | Comments

Model CSH 1250S/CSH series of low profile power inductors have windings consisting of a flat stock conductor, wound perpendicular to the axis of the core. Dimensions are of 12 × 12 × 5.6 mm(CSH1250S) and 12.5 × 12.5 × 5.6 mm (CS1260S). The devices are magnetically shielded and operating temperature rate is – 30°C to +100°C....

Soft Modem Devices

January 27, 2003 9:34 am | Product Releases | Comments

The 73M1901 includes a 16-bit CODEC and a fully differential hybrid circuit, and supports low-speed (V.22bis) and high-speed transmission up to 56 Kbps (V....

Coaxial Adapters

January 27, 2003 9:34 am | Product Releases | Comments

TRU 7-16 In-Series Adapters eliminate the need for multiple adapters when interconnecting 7-16 to type N, HN, C, LC, SQS, 7/8-EIA, and 1-5/8 EIA RF coaxial connectors. Providing ratings to 2,700 VRMS, these 50 Ohm adapters are offered in any specified male or female interface combination. Constructed with nickel or silver plated brass bodies, silver plated beryllium-copper female contacts, and silver or gold plated brass male contacts, the ...

VCO for DECT

January 27, 2003 9:34 am | Product Releases | Comments

The SMV0206L for the DECT market generates frequencies between 200 and 212 MHz within 0.5 - 2.25 V DC of control voltage. Operating temperature range is – 20 to 70°C. The device exhibits a clean spectral signal of – 98 dBc/Hz, typically, at 10 kHz from the carrier and attenuates the second harmonic to better than – 10 dBc....

Advertisement

Sensing Resistors

January 27, 2003 9:34 am | Product Releases | Comments

...

Routing Clip

January 27, 2003 9:34 am | Product Releases | Comments

The Split Wire Routing Clip is molded in nylon 6/6 material. The split design allows lading of wires by separating the clip at the split, and then inserting the prongs of the clip into a hole in the panel....

Communications Analyzer

January 27, 2003 9:34 am | Product Releases | Comments

The WCA200A Series enables in-depth characterization, troubleshooting, and verification in 2.5G and 3G designs. The analyzers unite vector signal analysis and spectrum analysis capabilities into one instrument. The Frequency Mask Trigger feature has both frequency and amplitude parameters that can be set independently of one another....

Performance Advantages of Multilayer Ceramic Capacitor (MLCC) Arrays

December 26, 2002 9:24 am | Product Releases | Comments

By Norm Mamada, Taiyo Yuden (U.S.A.), Inc. The latest wrinkle in BME (base metal electrode) Multilayer Ceramic Capacitor (MLCC) design is the emergence of the multiple-circuit "array" form factor. Typically available in two- and four-circuit configurations (Figure 1), Nickel-based (Ni) MLCC arrays provide significant production efficiencies over single-circuit devices that make the former extremely attractive to OEM designers....

WCDMA: Performance over Conformance

December 26, 2002 9:14 am | Product Releases | Comments

The successful launch of WCDMA services will require progressive, integrated approaches to evaluating the performance of WCDMA user equipment. By Rob Van Brunt, Spirent Communications      Wideband Code Division Multiple Access (WCDMA) technology will initially complement and eventually replace current Global System for Mobile Communications (GSM) systems as the most widely deployed air interface technology in t...

MRC Components OHG

December 26, 2002 9:00 am | Product Releases | Comments

Magnetic Cores Chang Sung Corporation offers a range of toroids in MPP-, High-Flux-, and Sendust powder materials manufactured to the highest specifications. These powder cores have a distributed gap and are made from ferrous alloy powders for low losses at elevated frequencies. Sizes offered are OD 3, 50 mm to 78,90 mm in all three materials and also a range of initial permabilities starting from 26 μi, 60 μi, 75 μi, 90μi...

Phihong USA

December 26, 2002 9:00 am | Product Releases | Comments

Power Supplies and Adapters Phihong introduces a new power supplies and power adapters catalog. A convenient selector guide highlights the complete line of adapters....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading