Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Transformer Tester

February 25, 2003 12:07 pm | Product Releases | Comments

The PF-401 is a bench top test system for transformers up to 10 KVA. It is a go/no-go system for production testing or incoming inspection. LED display shows primary test voltage, no load current, core losses and up to five open secondary voltages. The display indicates No-pass status with or without audible alarm....

Radio Measurement Platform

February 25, 2003 12:07 pm | Product Releases | Comments

Anite introduces the U-RAMS UMTS radio measurement platform. The U-RAMS enables the ability of the user to perform RF conformance tests, as specified by the 3GPP, on their handsets. The U-RAMS incorporates automated conformance test scripts, as well as a comprehensive set of logging, error recovery and analysis tools that minimize test time and streamline the development and introduction of user equipment devices....

Regulator IC

February 25, 2003 12:07 pm | Product Releases | Comments

The Si9185 is a 500 mA CMOS low dropout (LDO) regulator that features low dropout and ground current in a compact, thermally enhanced MLP33 PowerPAK package. With low dropout of 150 mV at 500 mA, and a 3 × 3 mm footprint, the Si9185 is designed to prolong battery life in compact, portable electronics....

Advertisement

Analog Switch

February 25, 2003 12:07 pm | Product Releases | Comments

The FSA3357 device is a single pole/triple throw (SP3T) CMOS analog switch. The switch features an R DS(on) of 6 Ohms resulting in minimal signal attenuation. The devices 0.01% total harmonic distortion (THD), coupled with its – 60 dB crosstalk characteristic, ensures signal integrity. A wide V CC range of 1....

Dual Rate VCXOs

February 25, 2003 12:07 pm | Product Releases | Comments

The 7311J series has a 155.52 MHz/FEC rate (selectable) with a single CMOS output signal. The 7311K series has a 622.08 MHz/FEC rate selectable) with a single ended sine wave output signal. The 7311Q series has a 622.08 MHz/FEC rate (selectable with a LVPECL complementary output signal. The 7311T series has a 155....

Thermistors

February 25, 2003 12:07 pm | Product Releases | Comments

The NT73 negative tempco thermistors are mechanically strong and feature a low profile. The thermistors feature anti-leaching nickel barrier terminations (90/10 solder plated, standard) and twelve standard resistance values from 1.0 kΩ through 150 kΩ. Sizes 0603, 0805, and 1206 are available....

Switched Filter Bank

February 25, 2003 12:07 pm | Product Releases | Comments

MITEQ offers a wideband integrated switchable LNA filter assembly that allows the user to switch between several overlapping frequency ranges. This system combines low loss, high rejection bandpass filters with low noise amplifiers that provide for superior RF performance and reliability. The devices exhibit excellent isolation between frequency bands by utilizing MITEQ's PIN switch technology....

Miniature Transformers

February 25, 2003 12:07 pm | Product Releases | Comments

The 786 series transformers are available in surface mount and through-hole versions and are ideal for applications such as line coupling, matching, and isolation. Inductance values are to 10 mH and isolation ratings of 1 kVrms. The transformers offer primary inductance values of between 100 μH and 10 mH and all employ a toroidal construction....

Advertisement

Matrix Systems Corp.

February 25, 2003 12:07 pm | Product Releases | Comments

RF Matrix Switch Model 11826 switches 16 inputs × 16 inputs in both its video section and RF section. Features of Model 11826 include: switches 75 Ohms video, 50 ohms RF; recalls 40 configurations; non-blocking, full fanout; RS232-C and IEEE-488 interfaces; front panel keypad control and LCD display; fully programmable; 6....

PCB Fuse Clips

February 25, 2003 12:07 pm | Product Releases | Comments

Rated for 6.3 to 15 Amps operation, the expanded selection of "Snap-in" or "Press-in" 2AG, 3AG, and 5 mm PCB mounted fuse clips are available with or without orientation tabs and end stops to ensure safety and design integrity. They are manufactured from brass and are tin-plated to enable low contact resistance....

Battery System

February 25, 2003 12:07 pm | Product Releases | Comments

The PowerSafe DDm battery system provides long service life and excellent performance for a variety of applications that require large capacity valve-regulated batteries. The cell design of the DDm incorporates thick 0.25 inches positive plates for a long battery life of up to 20 years. The battery cells have welded epoxy, dual post seals that are 100% water bath tested in the factory....

TOPICS:

Miniature BNC

February 25, 2003 12:07 pm | Product Releases | Comments

The UCBJR250-N is a miniature PCB-mounted right angle bulkhead BNC jack designed to address the issue of reducing size and improving density of OEM equipment. The 250 series includes also straight and right angle plugs, bulkhead cable jacks, and straight PCB-mounted jacks, available in both nickel and gold plate....

Assembly System

February 25, 2003 12:07 pm | Product Releases | Comments

Palomar announces Digital Dispensing™ technology on its 3500-II Die Bonder. The system increases throughput by doubling the speed in small dot adhesive die bonding applications. It enables high speed, reliable application of adhesives, epoxies, and fluxes with dot sizes as mall as 6 mils in diameter....

DC/DC Power Converters

February 25, 2003 12:07 pm | Product Releases | Comments

The Q Model of the UHE Series has input voltage ranges from 9 to 36 volts (Q12 model) and 18 to 75 volts (Q48 model). Output voltages/currents are: 3.3 Vout at 7.5 Amps; 5 Vout at 5 Amps; 12 Vout at 2.5 Amps; and 15 Vout at 2 Amps. Efficiencies as high as 90%. The models are come in rugged, fully-encapsulated, plastic packages....

TOPICS:

Photoetching

February 25, 2003 12:07 pm | Product Releases | Comments

Photofabrication Engineering introduces custom-made photochemically-etched anodes and cathodes for fuel cells, heat exchangers, and oxygen and hydrogen generators. PEI, using a proprietary process, can photoetch pure titanium, titanium alloys, zirconium, and zirconium allows along with more standard materials such as aluminum, stainless steel, copper, and brass....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading