Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Low Loss Circulator

September 11, 2002 5:17 am | Product Releases | Comments

Covering the 243 - 318 MHz transmit band, the CT-1645-N circulator handles 500 watts CW power with very low loss. Specifications include 20 dB minimum isolation, 0.3 dB maximum loss, and 1.25 VSWR. Efficient heat transfer keeps the size to a 3 1/2 inches× 3 5/8 inches× 1 1/4 inches package....

Bluetooth Test System

September 11, 2002 5:17 am | Product Releases | Comments

With the ME7865A, chipset developers, module manufacturers, and consumer product developers have a single, cost-effective solution that assures the performance of Bluetooth radios before submission to a Bluetooth Qualification Test Facility (BQTF). The ME7865A addresses all 16 test cases defined in the Bluetooth RF test specification up to 3 GHz....

Metallic Conformal Coating

September 11, 2002 5:17 am | Product Releases | Comments

The ECOPLATE™ process is free of solvents and corrosives. It eliminates the storage and handling of flammable materials required with traditional painting and electroless plating methods. No wastewater or vapor treatments are needed, and there are no solvent-bearing particulates or mask residues to wash off the chemicals....

Advertisement

MOSFET Relays

September 11, 2002 5:17 am | Product Releases | Comments

The LR family of the G3VM series measures 1.8 × 3.8 × 2 mm. Its 1-form-A contact configuration features low power consumption (5 mA LED trigger current). The LR family's AC/DC switching enables versatility, and its input-output isolation of 1.5 KVAC allows for better protection for the board....

Film Capacitors

September 11, 2002 5:17 am | Product Releases | Comments

The 5MPA film capacitor series is well suited for PWM outputs, to handle current spectrums from both line frequency to superimposed ripple on the carrier wave. Performance includes continuous operating temperature to +85°C, with current handling spectrum from 50 Hz to 20 kHz superimposed feedback....

EMI Measuring Receiver

September 11, 2002 5:17 am | Product Releases | Comments

This EMI measuring receiver is fully compliant with CISPR 16 part 1 and offers an extended frequency range of 9 kHz to 18 GHz. The SMR4518 is ideal for EMC testing laboratories, military and automotive standards testing, and commercial EMC testing applications. The SMR4518 has a measurement accuracy of less than 1....

YIG Oscillator

September 11, 2002 5:17 am | Product Releases | Comments

Model YOM2007 covers a frequency range of 3.5 to 10.5 GHz. The RF power output is +15 dBm minimum with a FM noise of 𤩨 dBc at 100 kHz away. The operating temperature will be from 㫎°C to +85°C. The unit is stable over the frequency range inclusive the drift and linearity typically by ± 10 MHz, guaranteed 䔰 MHz....

Miniature Chip Inductors

September 11, 2002 5:17 am | Product Releases | Comments

Available with chip sizes down to 0402, the BCcomponents series of multi-layer ceramic chip inductors offer devices with high Q values at high frequencies and typical self resonant frequencies of more than 6000 MHz. Devices in the general-purpose series of multi-layer ferrite chip inductors are supplied in sizes down to 0603 and provide significant PCB space savings....

Advertisement

NexTek, Inc.

September 11, 2002 5:17 am | Product Releases | Comments

Surge Protector      The QWS Series models are available in variable operating bandwidth frequencies, assorted connectors and genders in broadband and narrowband units to accommodate various wireless applications. A reverse polarity unit is also available. The PGT 7F7M 03 00 has a frequency of ....

Battery Packs

September 11, 2002 5:17 am | Product Releases | Comments

These custom battery packs feature special brackets or stand-offs to save space inside product packages or can incorporate snap-on plastic cases to create space outside, while maintaining a clean, streamlined appearance. Primary chemistries such as alkaline, nickel-cadmium, nickel-metal-hydride, lithium ion, and LMNO 2 are available....

TOPICS:

Multiplexers

September 11, 2002 5:17 am | Product Releases | Comments

The ZXFV302 provides a bandwidth of 240 MHz and a slew rate of 450 V/μs. The device is ideal for high-speed signal switching applications. A 4:1 multiplier, the ZXFV302 is characterized for use with 400 pF loads. Its stability and high 40 mA output current capability handles 75 Ω cable driving and high performance video circuits....

LDO Regulator

September 11, 2002 5:17 am | Product Releases | Comments

The MIC5239 is a tiny, micropower low-dropout (LDO) regulator providing keep-alive voltage for power sensitive applications ranging from notebook PCs to automotive electronics. The quiescent current is 23 uA and input voltage is 2.3 V to 30 V. It is capable of providing up to 500 mA of operating current, but when little or no current is drawn from the output, the quiescent current is 23 uA....

Dual-Channel Converter

September 11, 2002 5:17 am | Product Releases | Comments

The AD9238 features dual high-performance sample-and-hold amplifiers and an integrated voltage reference. It operates from a single 3 V power supply, and has a separate digital output driver supply to accommodate 2.5 V and 3.3 V logic families. Depending on the application, design engineers can choose from three speed grades, each characterized by low power consumption ranging from 180 mW when operating at 20 MSPS, to 330 mW for data rates ...

All-Inclusive Radio Module

September 11, 2002 5:15 am | Product Releases | Comments

     The HRF-ROC0935XM is ideal for battery powered wireless applications in digital data communications. The module includes a half-duplex Radio On a Chip 900 MHz transceiver integrated with an antenna switch, LNA, Xtal and all RF passives in a 23 × 23 mm shielded package....

Programmable Attenuator Units

September 10, 2002 11:15 am | Product Releases | Comments

     MCE/Weinschel's design approach uses a highly adaptable platform that allows configuration of the step attenuator to the customer's requirements using either a remote controller or through front panel control. These units provide a flexible, easy to program, low cost solution for bench test/calibration setups and subsystem applications....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading