Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Interface Chips

December 2, 2002 6:08 am | Product Releases | Comments

These two RS-232 interface chips feature rugged ESD protection, 3 V to 5.5 V supply voltage, 250-kbit/s minimum data rate, and low-power operation. Of the two RS-232 interface chips, the ST3243E includes three drivers and five receivers, while the ST3232E has two drivers and two receivers. Both chips also include a dual charge-pump circuit....

Custom Connectors

December 2, 2002 6:08 am | Product Releases | Comments

These custom high-performance connectors are for use in a variety of commercial and military communication products, including radar, missile guidance, satellites, cellular handsets, and cellular transmitters and receivers. Among the custom connectors that can be developed are SMA, SMP, SSMA, MCX, TNC, Type N, 2....

MOSFET Driver

December 2, 2002 6:08 am | Product Releases | Comments

The LT1910 is a rugged high side N-channel MOSFET driver with a wide operating supply range of 8 V to 48 V and protection against supply transients from – 15 V to 60 V. The LT1910 can be used as a solid-state circuit breaker or load switch to protect resistive, capacitive and inductive loads from short circuit and over current conditions....

Advertisement

WLL/CDMA Duplexer

December 2, 2002 6:08 am | Product Releases | Comments

The WSD-00241 duplexer is designed for China's 1900 MHz WLL / CDMA-95 Microcell BTS. The duplexer features 20 MHz narrow bandwidth, low passband insertion loss and high outer band attenuation levels, under 50 watts contiguous operation....

Elastomer for EMI Gaskets

December 2, 2002 6:08 am | Product Releases | Comments

CHO-SEAL® 6371 conductive elastomer is designed for shielding applications requiring EMI gaskets that are rated UL 94V-0 for fire resistance. CHO-SEAL 6371 materials can be fabricated into virtually any shape using both compression and injection molding processes. No post-curing is needed. CHO-SEAL 6371 material is a nickel-graphite-filled silicone elastomer that provides EMI shielding effectiveness of above 80 dB from 100 MHz up to 10 G...

RF Connector Series

December 2, 2002 6:08 am | Product Releases | Comments

The MCX E-Snap™ LP occupies 2.7 mm above, and 1.06 mm below the PCB. They feature a straight-though contact design to ensure reliability, a 50-ohm impedance, and provide repeatable performance to 18 GHz. The connector is specified for use in such wireless applications as GPS, cellular telephones, data telemetry, and automotive....

Active W-Band Multiplier

December 2, 2002 6:08 am | Product Releases | Comments

Model AW-4XW is an active X4 multiplier cover W-band (75 - 110 GHz) frequencies. All that is required is an input signal of 18.75 to 27.5 GHz with a power level of +12 dBm....

Diode Array

December 2, 2002 6:08 am | Product Releases | Comments

The SR70 is an ultra low capacitance steering diode array that is capable of protecting one line pair or two signal lines via the clamping of transient voltage to power lines or ground. Capacitance is 3 pF typical line to line, 5 pF line to ground. Low leakage current is less than 1 uA. The SOT-143 device has four leads that reduces internal lead inductance for low, overshoot voltage during fast front time transient events like ESD....

Advertisement

Optically Isolated Error Amplifier

December 2, 2002 6:08 am | Product Releases | Comments

The FOD2741 incorporates an optocoupler, precision reference, and error amplifier into an 8-pin white, dual-inline package. The device features a high 5,000 V RMS isolation voltage. The FOD2741 features a 2.5 V REF with 0.5%, 1%, and 2% tolerance options, a current transfer ration of 100% to 200%, and a low temperature coefficient of 50 ppm/°C maximum....

Fanout Line Driver

December 2, 2002 6:08 am | Product Releases | Comments

With 50 Ω line drivers, the outputs of the PRL-414B can drive up to 100 ft. of 50 Ω cables at clock rates greater than 80 MHz. Typical output rise and fall times are 2 ns. The device can deliver precision clock and logic signals from DC to 100 MHz to multiple loads over long lines. The Fanout Line Driver module is self-contained and complete with AC/DC adapter....

Picoammeter/Voltage Source

December 2, 2002 6:08 am | Product Releases | Comments

Model 6487 Picoammeter/Voltage sources is a 5 1/2-digit instrument that can apply a voltage stimulus as high as 500 V to a device under test and measures currents as low as 20 fA. It also provides direct readout of resistance measurements up to 5 × 10 16 ohms using the source voltage, measure current method, including an alternating voltage method to minimize background current errors....

Audio Matrix

December 2, 2002 6:08 am | Product Releases | Comments

Model 10980 is 48in × 48out × 2. It handles a wide bandwidth of DC - 150 kHz. Features include a low distortion of <.01% THD @ 20 kHz (1.0 Vp-p); embedded controller with RS-232C and IEEE-488 interfaces; true balanced pair input/output; store and recall 99 configurations; crosspoint verification; rack mount design with front panel keypad control....

Thermal Diode Sensor

December 2, 2002 6:08 am | Product Releases | Comments

The MIC281 Low Cost IttyBitty™ thermal sensor senses and reports the temperature of an off-chip embedded thermal diode or commodity transistor, interfacing to its host via an I 2 C/SMBus™ compatible 2-wire serial bus. The device is designed to respond in a failsafe manner to diode faults and features a user-activated low-power shutdown mode....

RF VCXOs

December 2, 2002 6:08 am | Product Releases | Comments

The RFV300 has a phase jitter at < 0.5 pS and is available in frequencies from 600 MHz to 1.25 GHz. Housed in a 7.5 × 5.0 × 1.5 mm ceramic package, the RFV300 series features a standard operating temperature of – 20°C to 70°C, with an extended temperature range of – 40°C to 85°C available....

SO-8 MOSFETs

December 2, 2002 6:08 am | Product Releases | Comments

These 100/150 V MOSFETs are effective in both conventional and high-density isolated DC/DC power supplies for communications and industrial markets. The range of 100 V (FDS3672, FDS3682, FDS3692, FDS3992) and 150 V (FDS2572, FDS2582) MOSFETs provides a choice of R DS(on) versus gate charge trade-offs to benefit each application's particular operating conditions....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading