The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Lens Horn Antenna

July 11, 2002 10:19 am | Product Releases | Comments

Flann Microwave introduces a range of high performance 316-grade stainless steel lens horn antenna for use in extreme and hazardous environments. Models are available in the frequency range of 8 to 95 GHz. The gauge achieves level measurement accuracy to ± 1 mm and temperature to ± 0.1°C....

Portable Antenna

July 11, 2002 10:19 am | Product Releases | Comments

Nearson introduces a series of portable antennas that meet the 802.11a application for 5 GHz operations. The antennas are designed for the 5.125 - 5.350 GHz frequency band. Standard models are K151, K152, and K181 series. The colinear designed dipole antenna has a typical performance of 5 dBi gain and a VSWR of less than 1....

Low Profile Vertical Antenna

July 11, 2002 10:19 am | Product Releases | Comments

The new BMLPV800HD low profile vertical antenna provides seamless wideband coverage of all 800/900 MHz frequencies and is designed to operate in severe environmental conditions. Featuring a rugged single-piece base and O-ring seal, this antenna has a tight, tough seal against humidity, salt or other conditions that could infiltrate the body of the antenna....


HBT Power Amplifier

July 11, 2002 10:19 am | Product Releases | Comments

The HMC408LP3 power amplifier is a highly efficient 5.1 to 5.9 GHz GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC power amplifier with +30 dBm P1dB output power and +43 dBm output IP3. This PA is ideal for low cost UNII PT-PT/Multi-PT and 802.11a/HiperLAN WLAN access point applications. The power amplifier provides 20 dB of gain and +32....

Dielectric Products

July 11, 2002 10:19 am | Product Releases | Comments

The MICROLAM® 600 Series Microvia Dielectric products have optimized electrical and mechanical properties. The materials are toughened to ensure superior reliability in cell phones, PDA's and other portable devices. MICROLAM 610 dielectric, a drop-in replacement for resin coated copper, minimizes dielectric cracking and provides improved PCB mechanical reliability....

Patch Antenna Elements

July 11, 2002 10:19 am | Product Releases | Comments

Spectrum Control offers its surface-mount patch antenna elements with an extended frequency range of 500 MHz to 6 GHz and a greater number of sizes. This extended frequency range allows these components to be used in numerous mobile, portable and handheld applications. These elements are optimized for ground plane, making them ideal for sensitive electronic devices where maximizing performance is essential....

Power Amplifier for GSM/GPRS

July 11, 2002 10:19 am | Product Releases | Comments

The model MMM5062 PA module uses the HIIPA (high impedance integrate power amplifier) packaging technique to provide a 50 ohm solution without the need for additional external components. The wideband matching advantage brought by the HIIPA technique provides a flexible PA solution that is able to adapt to GSM/GPRS application requirements....

Wireless Band Terminations

July 11, 2002 10:19 am | Product Releases | Comments

MECA offers 50-ohm loads optimized for low reflections to 3 GHz. The 401-F3 series dissipates 2 watts average (2 kW peak) through natural air convection aid is offered in N-Male, BNC-Male and TNC-Male connector configurations. These models feature plated brass connections with gold-plated contact pins and virgin electrical grade PTFE insulation....


Highly Integrated, System-Level GPRS Solutions

July 11, 2002 7:46 am | Product Releases | Comments

GPRS solutions are taking center stage for worldwide mobile Internet access. By Kassu Niiranen, Agere Systems Cellular phones equipped with high-speed wireless Internet data capabilities are now available to consumers in all three major regions of the world: Asia/Pacific, Europe, and the United States....

RF EDA Software Combines Simulation Capabilities with Ease-of-Design

July 10, 2002 12:25 pm | Product Releases | Comments

By Chris Mueth, Agilent EEsof EDA This article examines an RF EDA architecture designed to help engineers get their designs to market quickly, gain design expertise and learn to use different EDA technologies within their company's RF design processes. Key ingredients of this framework are application-focused design tools that narrow the gap between EDA technology and the design application....

Science Fiction or Science Fact?

July 10, 2002 10:49 am | Product Releases | Comments

By Kim Stokes, Editor-in -Chief, Every month I read countless articles looking for ideas for this column. As this industry continues to evolve and grow, I'm amazed at the out-of-the-box thinking that produces innovations that change our lives. Throughout history great thinkers have dared to challenge the status quo in order to bring their inventions, no matter how far-fetched, to society....

Broadband Horns

July 10, 2002 7:12 am | Product Releases | Comments

These dual polarized horns, designated DP240 and DP241, operate from 2 to 18 GHHZ and 10 to 50 GHz respectively. These high performance horns offer high isolation with low phase and amplitude in-balance between ports. The horns maintain low VSWR and the precision manufacturing method ensures low cross-polarization....

Low Pass Filters

July 10, 2002 7:12 am | Product Releases | Comments

Flann Microwave has extended their range of performance low pass microwave filters from 2.6 to 112 GHz passband. The filters are precision manufactured from solid brass and are used for removing undesirable higher harmonics. Typical applications include source refinement and swept frequency measurement....

WCDMA Booster Amplifiers

July 10, 2002 7:12 am | Product Releases | Comments

The Stealth Microwave Booster Amplifier Series operates in bands from 800 MHz to 2.2 GHz. They typically produce 22 watts of single carrier CDMA or 80 watts of single carrier GSM. The units have 11 dB of linear gain and have P1dB outputs greater than 100 W. DC operation is +28 V with current varying per application....

ESD Protection Devices

July 10, 2002 7:12 am | Product Releases | Comments

The PicoGuard™ CM1210 family of devices provides up to 6 kV contact protection, per the IEC61000-4-2 specification, with 1 pF channel input capacitance. The CM1210 family is ideal for high-speed port implementations such as USB 2.0, IEEE1394 (Firewire®, i.Link™) and Gigabit Ethernet that have high data and clock rates that require very low capacitive loading....


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.