Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

EMI Shielding Gaskets

November 1, 2002 6:08 am | Product Releases | Comments

The GS8000 EMI gaskets are suitable for flexible housing materials and allow for reduction in screw locations. Less than 3.4 N/cm of pressure (for a 1 mm trace) is required to compress the gaskets from a nominal starting thickness of 1 mm to a compressed thickness of 0.4 mm. At this point, DC resistance is less than 10 mOhm for a 19 mm 2 donut, and shielding effectiveness is greater than 90 dB....

Universal Programming System

November 1, 2002 6:08 am | Product Releases | Comments

The ProWriter is a universal multi-socket programmer supporting gang and set programming for a wide range of device types, with support for programmable logic, memory devices, and microcontrollers, including Flash-based microcontrollers. The ProWriter system offers either 4 or 8 fully independent programming sites per unit....

Bench Top Tester

November 1, 2002 6:08 am | Product Releases | Comments

The OS-32 Automated Continuity Test System is a self-contained, auto programming test system that gives fast results of shorts and open circuits used to verify the integrity of IC package bond wires, bare and assembled PCBs, and short cable assemblies — instantaneously. The OS-32 system provides 16-bit accuracy on both the source and measurement and fast measurement switching on up to 1000 pins ensuring accurate performance and complete...

Advertisement

Bi-directional Clock and Data matrix

November 1, 2002 6:08 am | Product Releases | Comments

The MSSC 123240 is an 8 × 10 × 16 pair RS-422 bi-directional clock and data matrix and also a 8 × 10 coaxial IRIG matrix that is fully programmable and 19 inch rack mountable. The RS-422 matrices are fully buffered, using standard RS-422 line drivers and receivers. The IRIG Matrix employs non-buffered solid state contacts capable of passing up to ± 4 volts into a 75 ohm load....

Core Module

November 1, 2002 6:08 am | Product Releases | Comments

The RCM3200 RabbitCore is ideal for rapidly developing and implementing embedded systems with fully integrated 10/100Base-T Ethernet connectivity. The RCM3200 operates at 3.3 V (with 5 V tolerant I/O), runs at 44.2 MHz, and features 6 serial ports. Built-in low-EMI features, including a clock spectrum spreader, almost eliminate EMI problems....

Backup Power Source

November 1, 2002 6:08 am | Product Releases | Comments

The ER17/50H battery is ideal as a backup power source for memory ICs. The battery has a high voltage of 3.6 volts, features a flat discharge voltage through the end of the battery's life, high energy density, and a temperature range of 㫏°C to 85°C. Nominal discharge current is 120 microamperes and weight is 20 grams....

Panel Mount LED Assemblies

November 1, 2002 6:08 am | Product Releases | Comments

The PM and MP Series are offered with forward voltages from 2 V through 12 V using integrated resistors and 14 V - 28 V using external resistors. Low current 2 mA versions are available. The PM series assemblies are manufactured from UL rated 94V-0 black 6 Nylon, and come standard with pin terminals or six-inch 24AWG wire leads....

High Speed Packages

November 1, 2002 6:08 am | Product Releases | Comments

These packages are designed for mixed signal devices such as MUX (multiplex), DAC (digital analog converters), ADC (analog digital converters), and track and hold chips for ultra wideband data acquisition. These packages maintain the electrical, thermal, and mechanical integrity of chips operating at speeds as high as 50 GHz or 40 Gbits/sec....

Advertisement

Bulkhead Crimp Connector

November 1, 2002 6:08 am | Product Releases | Comments

0 The RP-4252-B connector is a reverse polarity (reverse gender) SMB bulkhead crimp connector with an SMB jack body and SMB plug contact and is IEE 802.11b Wi-Fi™ compatible. Designed for use up to 4 GHz, this connector features a nickel-plated brass body, gold plated contact, nickel-plated hex nut and lock washer, and Teflon insulation....

New Spectrum, New Ideas

November 1, 2002 6:06 am | Product Releases | Comments

By Mitchell Lazarus, Telecommunications Lawyer, mlazarus@alum.mit.edu; (703) 812-0440 The FCC will soon authorize new millimeter-wave spectrum at 71 - 76, 81 - 86, and 92 - 95 GHz. These allocations will provide vast amounts of bandwidth in virtually empty spectrum, a welcome combination.      The allocations will also challenge the FCC to develop a regulatory framework that fosters real innovation, development, and ...

SiGe ICs

November 1, 2002 6:04 am | Product Releases | Comments

The MAX9989/MAX9990 are +20 dBm LO buffers. These single ICs provide ۫ dB output power variance while replacing three discrete amplifiers, a coupler, and dozens of biasing components. They are ideal for cellular/GSM/DCS/PCS, and UMTS base station applications. The designer can set the output power levels from +14 dBm to +20 dBm....

Filter Assembly

November 1, 2002 6:04 am | Product Releases | Comments

The WSFA-00037 is an AMPS Fullband Dual Receive Filter Assembly providing high selectivity and low loss in a very small and thin package. Designed primarily for Macro, Micro and Pico AMPS Cellular Systems, the WSFA-00037 contains two receive filters in a single assembly for primary and diversity sector receive paths....

Axial Resistors

November 1, 2002 6:04 am | Product Releases | Comments

IRC Wirewound and Film Technologies Division introduced a series of compact carbon composition resistors capable of handling overload voltages up to 1000 V and energy pulses up to 35 J. The CCR series is rated for 1 W at 25°C with a maximum overload voltage of 1000 V, limiting element voltage of 500 V, and pulse handling rating up to 35 J....

LDO and Microprocessor

November 1, 2002 6:04 am | Product Releases | Comments

The MAX6469-MAX6476 low dropout, integrated linear regulator and microprocessor reset circuits come in a SOT23 package. These products are available with preset outputs from 1.5 V to 3.3 V in 100 mV increments that can drive up to 300 mA of output current. They also have an adjustable feature that allows the output voltage to be adjusted from 1....

Resistor Networks

November 1, 2002 6:04 am | Product Releases | Comments

BI Technologies has enhanced their nickel-chromium thin film technology to produce resistor networks with absolute tolerances less than 0.05% and TCRs below 25 ppm/°C. Tracking is less than 2 ppm over the temperature range of 㫏°C to +125°C. Long term stability is typically 50 ppm/year....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading