Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

SMD Transformers

September 27, 2002 6:44 am | Product Releases | Comments

Model TSS11230F-01 SMD low profile back light power supply transformer are ideal for PDAs. Specifications include 1.2 watt maximum output, operating frequency from 90 kHz to 140 kHz, and 750 Vrms maximum....

WLAN Slot Antenna

September 27, 2002 6:33 am | Product Releases | Comments

TECOM introduces a small size, low cost, omnidirectional slot antenna used in Wi-Fi, WLAN, wireless Internet, and more. Supplied in custom fit and size, the slot antenna is lightweight and provides easy assembly placement. The model 703611 is available in the 2.400 - 2.485 GHz frequency range, omindirectional pattern, gain of 0 dBi nominal, VSWR at 2....

SAW Oscillator

September 27, 2002 6:33 am | Product Releases | Comments

Vectron introduces an ultra small, low jitter, voltage controlled SAW oscillator for use in telecommunication and industrial applications. The VS-700 operates at the fundamental frequency of the internal SAW filter. This filter is a high stability, high-Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating temperature range....

Advertisement

Edge Compressor

September 27, 2002 6:33 am | Product Releases | Comments

Picosecond Pulse Labs announces its new edge compressor products based on Non Linear Transmission Line (NLTL) technology. These products can drive 50 Ohms with transition times as short as 4 ps, compress input pulse edges by as much as 70 ps and provide peak output amplitudes greater than 10 volts....

SiGe Power Amplifier

September 27, 2002 6:33 am | Product Releases | Comments

The MAX2247 PA is available in the tiny 3 x 4 UCSP™ measuring 1.5 × 2.0 mm. The device is ideal for small form factor WLAN applications. The MAX2247 integrates a three-stage power amplifier with on-chip input and interstage match, output power detector, and power management circuitry. The power detector provides over 20 dB of dynamic range with ۪....

RF Signal Generators

September 27, 2002 6:33 am | Product Releases | Comments

Available in three frequency ranges from 250 kHz to 2 GHz, 3 GHz and 4 GHz, the 3410 series of digital RF signal generators is used for testing and emulation of 2G, 3G and 4G systems; digital Private Mobile Radio; WLANs, and Bluetooth systems. The 3410 series combines full digital, vector and analog modulation in a 2U rack size....

Front End Connectors

September 27, 2002 6:33 am | Product Releases | Comments

Times Microwave introduces its new stainless steel 716 DIN male and 716 DIN female replaceable front end connectors for use with its 50 Ohm Testmate™ cable product line. Designed for use up to PCS frequencies and higher, the new interchangeable connectors are suited to survive the rigors of service in all type of outdoor conditions....

Linear Power Amplifiers

September 27, 2002 6:33 am | Product Releases | Comments

Skyworks introduces two 2.4 GHz linear power amplifiers for wireless LAN applications. The AP157-317 is capable of supplying 27 dBm output power with 802.11b modulation at 11 Mbit/s, while the AP163-317 supports 23.5 dBm output power. The AP157-317 and AP163-317 deliver high-end performance over the 1....

Advertisement

The Forest in the Trees

September 27, 2002 6:20 am | Product Releases | Comments

by Aimee Kalnoskas, Editorial Director, Wireless Design & Development Magazine The case can be made that the state of the wireless industry is something like the drought that currently affects over half of North America and that has led to the eruption of deadly forest fires....

Rotary Step Attenuators

September 27, 2002 6:09 am | Product Releases | Comments

These high performance 50 ohm, miniature, 1 W, DC to 3 GHz rotary step attenuators feature high accuracy, wide frequency range, and excellent repeatability and switch life. Single Rotor models include 1 dB in 0.1 dB steps, 10 dB in 1 dB steps and 100 dB in 10 dB steps. Dual rotor models include 11 dB in 0....

SoC Design/Simulation

September 27, 2002 6:07 am | Product Releases | Comments

Elanix has integrated network device models into a single kernel engine that fully supports mixed signal and mixed rate SoC design and simulation. Device models include scattering parameters (s-parameters), admittance parameters, impedance parameters, hybrid-h and hybrid-g parameters. Designers benefit from the inclusion of analog network device models into a true mixed signal (analog and mixed-rate digital) system-level design tool....

Bluetooth Model Library

September 27, 2002 6:07 am | Product Releases | Comments

Bluetooth Library elements are implemented with APLAC System Simulator > blocks, for analyzing signal spectrum, waveform, bit patterns, BER, and EVM. Using the APLAC System Simulator can extend Bluetooth transmitter and > receiver simulation to its full potential, analyzing complete systems with channel models, noise sources and interfering signals from various sources....

GPS Receiver IC

September 27, 2002 6:07 am | Product Releases | Comments

The PointCharger SE4100 integrates the IF filter, VCO, tank circuitry and LNA into a 4 mm 2 package with a typical current draw of 10 mA from a 2.7 V supply. This GPS receiver IC includes an on-chip switchable gain LNA that delivers a low noise figure of 1.3 dB typical, as well as quick recovery from either power saving mode for from RF overload from a local transmitter....

SiGe Transistors

September 27, 2002 6:07 am | Product Releases | Comments

The NESG2021 and NESG2031 are ideal for use as LNA devices in WLAN and short-range wireless applications. They are housed in a miniature, low profile, flat lead M05 packaged. The NESG2021 features a noise figure of 0.9 dB at 2 GHz and 1.3 dB at 5.2 GHz; associated gain is 18 dB at 2 GHz and 11 dB at 5....

Advances in Bluetooth Modules with LTCC and Multilayer Technologies

September 26, 2002 1:28 pm | Wireless Design & Development | Product Releases | Comments

Low Temperature Co-fired Ceramics offer quantum leap forward in Bluetooth device miniaturization. By Shoichi Sekiguchi, Taiyo Yuden Co., Ltd. and Hiro Kawada, TRDA Inc. Bluetooth-emerging wireless communication standard or technical oddity of questionable commercial viability? Perhaps the answer lies just around the next curve on the technology highway, in the form of Low-Temperature Co-fired Ceramics (LTCC) — an emerging technol...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading