Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Universal Power Supplies

October 1, 2003 6:12 am | Product Releases | Comments

Phoenix Contact introduces QUINT power supplies, providing universal 24 V supply with output currents of 2.5, 5, 10, 20, 30, and 40 A. The output currents are available with a regulated and adjustable output voltage of 22.5 to 28.5 VDC. QUINT power supplies provide full output power with loss of AC power up to 20 ms....

TOPICS:

Connectorized VCO

October 1, 2003 6:12 am | Product Releases | Comments

ILSI introduces a connectorized VCO, part number ILSI-C-1205. Package measures 1.50 inches 2 by 0.75 inches high. Frequency range is 5100 MHz to 5400 MHz with a tuning voltage from 0.0 to 10.0 V. tuning linearity is 3:1 maximum. Supply voltage is 15.0 VDC. Operating temperature is 㪶°C to +90°C....

Cable Clamps

October 1, 2003 6:12 am | Product Releases | Comments

Micro Plastics' adhesive backed adjustable cable clamps are molded in black nylon 6/6 with a 94-V2 UL rating. The releasable clip design allows for additional or removal of cables and wires. These clamps are available in 5 sizes ranging from .311 inches to 1 inches bundle diameters, with easy open and close design....

Advertisement

SPDT Failsafe Switch

October 1, 2003 6:12 am | Product Releases | Comments

Dow-Key introduces a high power, high shock 18 GHz SPDT switch with SMA connectors. DC characteristics include 24 to 32 VDC (28 VDC nominal operating current is 300 mA typical at 20°C) operation. Equipped with a failsafe actuator, this device switches in 15 ms (maximum). In the X-band application, the switch is able to handle CW power exceeding 130 W and peak power 400 W....

Digital Potentiometer Chips

October 1, 2003 6:12 am | Product Releases | Comments

Winbond introduces a series for its family of WinPot line of non-volatile digital potentiometer chips. The WinPot WMS71xx is a series of single channel ICs featuring 16, 32, 64, 128, and 256 taps non-volatile digital potentiometers with 10K., 50K. or 100K. resistance values. The Up/Down interface is easy-to-use and employs three wires to control wiper movement or store tap value in the non-volatile memory....

Digital-to-Analog Converters

October 1, 2003 6:12 am | Product Releases | Comments

Analog Devices introduces a 16-bit digital-to-analog converter (DAC) with conversion rate exceeding 600 MSPS. This device also features noise performance: – 161 dBm/Hz for output frequencies between 100 MHz and 300 MHz and – 169 dBm/Hz at 20 MHz output. The AD9726 receivers support SDR (single data rate) or DDR (double data rate) modes....

Inlet Filter and Switch

October 1, 2003 6:12 am | Product Releases | Comments

The RP188 is an integrated, high-performance, shielded EMI filter, universal AC power inlet, switch and fuse in a module. It provides five power entry functions. The modules eliminate equipment and mains-borne electro-magnetic interference. The modules are designed as a screw-mounted panel unit, with fast-on power connectors....

UMTS Radio Tester

October 1, 2003 6:12 am | Product Releases | Comments

The CMU300 is a UMTS radio tester that allows function-reliable installation of the UMTS network. The CMU300 provides transmitter and receiver measurements in one instrument. During the installation phase, the CMU300 serves as a UMTS conformance tester for all components used. www.rohde-schwarz....

Advertisement

Replacement LED Lamps

October 1, 2003 6:12 am | Product Releases | Comments

These illuminators integrate Indium Gallium Aluminum Phosphide (InGaAlP) and Silicon Carbide/Gallium Nitride (SiC/GaN) LED technologies, 25 mm Edison screw bases and light-maximizing designs. Lamps come in 30-LED and 40-LED configurations. Depending on the model, Task/Spotlight LED lamps draw from a minimum of 1....

Controller Card

October 1, 2003 6:12 am | Product Releases | Comments

The PXI 100 is a PXI controller card for ScanWorks boundary scan test and programming systems. The PXI 100 enhances ScanWorks' compatibility with National Instruments test executives, in functional test operations. ScanWorks running on a PXI-based platform with the PXI-100 controller can load software or updates into programmable logic devices (PLDs) and flash memory after these devices are soldered onto a board....

EMC Test System

October 1, 2003 6:12 am | Product Releases | Comments

Schaffner introduces a modular system for conducted EMC immunity testing. The Modula EMC test system standard functions include the generation of classic interference pulses such as burst and surge, as well as power quality simulations. The system has a wireless remote control capability that enables users to operate the system from a standing or sitting position....

W-Band Mixer Preamp

October 1, 2003 6:12 am | Product Releases | Comments

Model PW-UB is a DC-biased mixer with preamp capable of receiving low level signals in W-band. The frequency range for both the RF and lO is 75 to 100 GHz. The IF output range is 10 to 500 MHz. With a DC bias of +15 V, the required LO input power is 0 dBm. DSB noise figure is 6 dB typical, 8 dB maximum, with an RF to IF gain of 25 dB typical....

Panel Connectors

October 1, 2003 6:12 am | Product Releases | Comments

Reynolds introduces high temperature thermoplastic version of the Pee-Wee™ panel receptacle connector. The connector is rated at 12 K VDC at 70,000 feet with a temperature range of – 55°C to +125°C. the size 22 pin contact accommodates up to 22 AWG wire. Part number is 178-6544. www....

Cable Clips

October 1, 2003 6:12 am | Product Releases | Comments

These nail in clips are molded in black or white polyethylene, and supplied with nails already installed. Round clips are available in sizes ranging from .157 inches to .315 inches diameter to fit round cables, including RG 59 and double shielded cables. Two sizes are available to fit flat cables (....

CompactPCI Enclosure

October 1, 2003 6:12 am | Product Releases | Comments

One Stop Systems introduces a 4U high by 12 inches deep horizontal CompactPCI enclosure. The 4U high rackmount enclosure provides a CompactPCI platform for applications that require up to eight 6U slots but do not require the redundancy of larger CompactPCI enclosures. One 5.25 inches front access drive bay and an internal 3....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading