Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Piezoelectric Motors

August 1, 2002 11:07 am | Product Releases | Comments

The HR-V and HR-UV series motors are for use in vacuum environments. With a size range from a single element (providing .45 kg of force) to an eight element monitor (providing 3.6 kg of force) the HR series is capable of driving both linear and rotary stages. The HR-V vacuum series is rated up to 10-7 Torr and the HR-UV is rated up to 10-10 Torr....

Broadband Amplifier

August 1, 2002 11:07 am | Product Releases | Comments

The Model 75A400 spans the frequency range from 10 kHz to 400 MHz. This self-contained, air-cooled, solid state amplifier unit has a rated power output of 75 watts. Utilization of push-pull MOSFET circuitry lowers distortion, improves stability and allows operation into any load impedance without damage....

Lowpass Filter

August 1, 2002 11:07 am | Product Releases | Comments

Filter model 50-009-4000-000, at 30000 MHz 3 dB cut-off frequency, has excellent pulse shaping, a printed filter configuration while maintaining a small size and rugged design. The filter features absorption up to 65 GHz, increasing attenuation up to 100 GHz, group delay variation less than 7 psec up to 65 GHz, and linear phase deviation less than 8° up to 43 GHz....

Advertisement

Transmitters and Switches

August 1, 2002 11:07 am | Product Releases | Comments

The EVO Series transmitters and switches from Italcoppie are introduced from Instrumentation Group. The EVO Series of transmitters are compact and employ a one-way only, screw on, watertight connection that tightens by hand. The 4-20 mA output is factory programmed to customer specifications. EVO transmitters connect easily to Italcoppie PT100 sensors....

Protection Devices

August 1, 2002 11:07 am | Product Releases | Comments

The SPUSB1 combines ESD protection (up to 30 kV), EMI/RFI filtering and termination of into an ultra small SC70 six lead package. The SPUSBI replaces components used to protect upstream circuit elements such as USB controllers. The SPUSB1 series offers designers a choice of 12, 22 or 33 ohm series resistance values tailored to match the USB controller resistance and cable impedance....

Modules for Repeatable Calibrations

August 1, 2002 11:07 am | Product Releases | Comments

The 36584 Series AutoCal® modules provide fast, repeatable, and high-quality coaxial calibrations for 2-, 3-, and 4-port S-parameter requirements. The 36584 series covers the 10 MHz to 9 GHz frequency range and can be used with the Scorpion® VNMS. The AutoCal module characterization, which is traceable to NIST, is used to aid in the removal of normal systematic errors....

Switch Matrices

August 1, 2002 11:07 am | Product Releases | Comments

The P/N 9D8-420822T and P/N 13D12-4808221 are based on the standard design of the SP8T and the SP12T internally terminated switches. Access to the termination port, via SMA connectors, allows for the utilization of the remotely mounted high power 50 Ω termination, dramatically increasing the power handling of these units....

Circuit Breakers

August 1, 2002 11:07 am | Product Releases | Comments

The 8345 circuit breaker is ideal for telecommunications equipment, plant control systems, and other applications where reliable protection in a compact package is critical. The 8345 is available in current ratings up to 125 amps. The 8345 circuit breaker meets UL standard 489A. As a single-pole magnetic circuit breaker, the 8345 is available in ratings up to 125 amps and measures 0....

Advertisement

Cabinet Racks

August 1, 2002 11:07 am | Product Releases | Comments

These two cabinet racks adhere to NEMA 12 and IEC 529 IP 55 requirements. The cabinets have been tested and listed under UL-508 12 for use in both the USA and Canada. Catalog number NR-10025 internal panel space dimensions are 19.00 inches × 70.00 inches with the clear inside (usable) depth of 29....

Surge Protectors

August 1, 2002 11:07 am | Product Releases | Comments

The Quarterwave Stubless (QWS) series modules are available in variable operating bandwidth frequencies, assorted connectors and genders in broadband narrowband units to accommodate various wireless applications. A reverse polarity unit is also available in many modules. The QSS 7F7M AK 00 narrowband 7-16 Female bulkhead to 7-16 male quarterwave stub protector has a frequency range of 411 MHz to 494 MHz....

Phase Noise Generator

August 1, 2002 11:07 am | Product Releases | Comments

The CS2040PNG Precision Phase Noise Generator was developed to meet the challenges of modeling phase noise of VCOs, synthesizers, DROs, YIGs and crystal oscillators. The CS2040PNG enables the user to specify up to 16 continuous phase noise break points and 16 spurious phase noise values through easy-to-use point-and-click control....

Broadband Bias Tees

August 1, 2002 11:07 am | Product Releases | Comments

RLC Electronics introduces their new line of broadband bias tees. Frequency range is 0.5 to 40 GHz. VSWR is 1.35:1 from 0.5 to 12.0 GHz, and 1.8:1 from 12 to 40 GHz. Insertion loss is 1.0 from 0.5 to 12.0 GHz, and 2.5 dB typical (3 dB maximum) from 12 to 40 GHz. Bias is 250 mA, 16 V DC. RF power is 5 watts maximum....

SMT Directional Couplers

August 1, 2002 11:07 am | Product Releases | Comments

The GLSL series of surface mount direction couplers can be used for RF circuitry, broadband, mobile radio, and satellite TV technologies. The compact design is on a ceramic base. Model number GLSL20D102 is a 20 dB coupler operating from 1 MHz to 1 GHz. Typical insertion loss is less than 0.5 dB from 2 MHz to 1 GHz....

CDT Aerospace Group

August 1, 2002 11:03 am | Product Releases | Comments

PTFE Wire Insulation      CDT Seamless Wrap PTFE tape improves handling and mechanical performance of PTFE-insulated wire and jacketed cable by virtually eliminating the mechanical "weak points" of the seams caused by tape overlap in conventional PTFE tape wrapping....

TOPICS:

MECA Electronics, Inc.

August 1, 2002 11:03 am | Product Releases | Comments

Power Divider/Combiners      MECA introduces compact, high-performance, weatherproof, 2-way & 3-way Wilkinson power divider/combiners ideally suited for outdoor, ISM antenna applications (2.4 - 2.5 GHz) where multiple poles are used to enhance system coverage. Mechanical features include nickel-plated brass N-Female connectors, gold-plated contact pins, virgin electrical grade PTFE insulation within the connectors, a r...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading