Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Media Processor

April 7, 2004 12:09 pm | Product Releases | Comments

Atsana introduces its J2211 media processor for embedded applications such as multimedia on mobile handsets. The J2211 is a fully programmable system-on-a-chip (SoC) that functions as a companion processor to handset baseband processors. The device features Atsana's array processor as well as an ARM9 RISC processor, providing a solution for video, image audio, and graphics processing....

Antenna Solution

April 7, 2004 12:09 pm | Product Releases | Comments

Maxrad. announces an above ceiling mount diversity in-building antenna for Wi-Fi and WLAN applications operating at 802.11b and 802.11g frequencies. The Michelangelo model UFOD24003PT diversity antenna combines two ultra flat omnidirectional antennas installed with a dual stud, above ceiling mount, designed to keep the antenna out-of-sight in occupied locations....

32Mx64 DDR SDRAM

April 7, 2004 12:09 pm | Product Releases | Comments

White Electronic Designs announces the release of their 32 M × 64 DDR SDRAM. The 256 MB (2Gb) DDR SDRAM is a CMOS, dynamic random-access, memory using four chips containing 536,870,912 bits. Each chip is internally configured as a quad-bank DRAM. The device uses double data rate architecture to achieve operation....

Advertisement

Boundary Scan Operation Assistant

April 7, 2004 11:52 am | Product Releases | Comments

The time it takes first-time and occasional users to develop a functional JTAG test has been reduced by the ScanWorks® Assistant from ASSET. Key features of the Assistant include step-by-step advice to users. It explains all of the options the user has available and anticipates many of the questions new users typically have about JTAG testing....

USB Module

April 7, 2004 11:52 am | Product Releases | Comments

The Linx QS Series USB module allows the addition of USB to almost any device. Housed in an SMD package the QS module provides a solution for converting between USB and logic level serial sources. The module can be directly connected to a variety of serial devices, including microprocessors, RS232/RS485 level converters, or Linx wireless RF modules....

Web-Based Tools

April 7, 2004 11:52 am | Product Releases | Comments

Fairchild announces the web-based FETBench and Power Factor Correction (PFC) Toolkit, to help designers to shorten design times and speed time to market. These online tools offer choices of topologies, product selection, simulation creation, and other features. The upgraded FETBench provides comprehensive MOSFET device selection, application analysis, and a thermal simulation tool based on common power conversion schemes....

Surface Mount Components

April 7, 2004 11:52 am | Product Releases | Comments

Anaren introduces the next generation of its Xinger®-brand components with Xinger II®. The lineup includes 3, 5, 10, and 20 dB couplers covering 800 to 2300 MHz, with performance enhancements. The new line offers the following improvements and benefits: 34% lower insertion loss; 33% better phase and 66% better amplitude balance; 66% tighter coupling tolerance and 38% higher directivity; 80% better frequency sensitivity; 35% more isola...

Low Noise Op Amps

April 7, 2004 11:52 am | Product Releases | Comments

Two families of operational amplifiers from Linear Technology deliver low noise performnance, rail-to-rail outputs and fully specified 3.3 V operation. The LT®6230/1/2 and LT6233/4/5 amplifiers combine features suitable for designing active filters and driving A/D converters in instrumentation, communications, and medical equipment....

Advertisement

Iridium Bandpass Filter

April 7, 2004 11:04 am | Product Releases | Comments

The 6FVSP-1622.375/X8-NP-N is a low loss highly selective cavity bandpass filter used to isolate the iridium band from outside interference. Special narrow band design provides a low loss passband 8.25 MHz around center frequency and 40 dB or more of rejection at center frequency ± 6 MHz. The rugged mechanical design allows for stable performance for MIL-level applications....

Ceramic Piezoelectric Speakers

April 7, 2004 11:04 am | Product Releases | Comments

Taiyo Yuden announces the MLS series of multiplayer ceramic piezoelectric speakers. Available in three sizes, the MLS series eliminates the magnet that all standard dynamic speakers require for operation. Standard thickness of the MLS is 0.7 mm. The acoustic design of the MLS relies on its own output power to maintain sound pressure levels and quality....

Low Noise Amplfier

April 7, 2004 11:04 am | Product Releases | Comments

Planar Electronics introduces Model Number PE2-15-2M18G-5R5-16-15-SFF. The device is an ultra broadband, low noise amplifier that operates from 2.0 MHz to 18.0 GHz. Typical specifications include: gain of 15 dB with a gain flatness of ± 2.5 dB; noise figure is 5.5 dB; output 1dB compression is 16 dBm; VSWR input and output is 2....

Latching Microwave Relay Modules

April 7, 2004 11:04 am | Product Releases | Comments

VXI introduces a suite of latching microwave relay modules. The family includes the SM7001L (4) SP6T latching self-terminated 20 GHz relays; SM7012L (12) SPDT latching self-terminated 20 GHz relays; SM7013L (3) SPDT latching self-terminated 20 GHz relays; and SM7016L (6) SPDT latching self-terminated 20 GHz relays....

Integrated Chip Solution

April 7, 2004 11:04 am | Product Releases | Comments

Connor Winfield introduces the STC3500 stand alone chip for Stratum 3 Telecom applications. The STC3800 is an integrated single chip solution for the synchronous timing source in SONET/SDH network elements. The STC3800 supports Master/Slave operation and can operate in Free Run, locked or Hole Over mode....

WCDMA Baseband Processor

April 7, 2004 11:04 am | Product Releases | Comments

Zyray introduces the SPINNER chip 1.1. The product enables device manufacturers to develop single-mode WCDMA, dual-mode GSM/GPRS & WCDMA, and multi-mode GSM/GPRS, EDGE & WCDMA devices. SPINNER chip 1.1 is housed in a 10 × 10 mm BGA including integrated analog technology and is flexible enough to mate with various RF transceivers, baseband processors, and dual-mode protocol stacks....

Smart Card IC with Flash

April 7, 2004 11:04 am | Product Releases | Comments

EM Microelectronic announces the EMTCG256-3G, a flash memory-based smart card IC designed for use in SIM and Java cards for GSM mobile pones. The EMTCG256-3G is compatible with the ISO7816-3 Integrated Circuit Card (smart card) specification, and operates with power supplies from 5 V down to 1.8 V....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading