Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Hybrid Amplifiers

September 27, 2002 6:44 am | Product Releases | Comments

The QBH-2001 and QBH-2003 LNAs are complete amplifiers ready to plug-and-play saving time and money. With their metal cover, they are suitable to minimize or eliminate the need for isolation covers on boards. QBH-2001, PCS & Broadband coverage, .9 dB NF, and +34 dBm OIP3. QBH-2003, Cellular band, 1....

Probing Solution

September 27, 2002 6:44 am | Product Releases | Comments

Cascade Microtech's S300 Semiautomatic Probing Solution for 300 mm wafers, combined with Agilent's 4294A, provides unmatched productivity and accuracy for advanced CV analysis of deep submicron semiconductors to 110 MHz. Key system features include: off-wafer, thermally isolated, SOL calibration standards, off-wafer system reference capacitors, and high-frequency probes and accessories....

Audio Processor IC

September 27, 2002 6:44 am | Product Releases | Comments

The CMX882 operates from a single 2.7 volt rail. Under the control of the host μC, all audio requirements are catered for: Voiceband and sub-audio filtering, Pre/de-emphasis, compression and expansion, audio routing and global level setting with single or two-point modulation available in the transmit path....

Advertisement

Planar MOSFETs

September 27, 2002 6:44 am | Product Releases | Comments

Fairchild introduces seven high voltage, planar MOSFETs offering low on-resistance, low gate charge and high energy density in avalanche and commutation modes. They are designed to meet the performance requirements of advanced switch-mode power supplies (SMPS) and DC/DC converters. The 500 V devices are aimed at SMPS and power factor correction applications, and four 200 V parts are for DC/DC converter applications....

MEMS Packaging Automated

September 27, 2002 6:44 am | Product Releases | Comments

The 3500-II component assembly cell for MEMS packaging applications provides five micron accuracy placement in the X, Y, and Z axes, and .2 milliradians in Theta axis. It eliminates the need for human touch or handling of the devices. Presentation of the components for assembly is done in waffle paks or gel paks....

Double-Coated Adhesives

September 27, 2002 6:44 am | Product Releases | Comments

The MACbond® family of double-coated adhesives demonstrates high tack and is ideal for gasketing, dust sealing and noise dampening applications. The IB-2120 is an acrylic and rubber tape for high-performance applications. The first adhesive side (acrylic) is applied to the printed nameplate. The second side (rubber), which features an aggressive adhesive, is used to bond to the low energy substrate....

Chip Capacitors

September 27, 2002 6:44 am | Product Releases | Comments

The PXA series low profile, vertical mount capacitors are available in a 6.3 × 5.2 mm case size. Electrically, the series has a capacitance range of 10 to 1,000 μF and a voltage range of 2.5 to 25 V DC. Leakage current is 0.2 CV maximum after two minutes at +20°C. Operating temperature range is – 55°C to +105°C....

Power Inverters

September 27, 2002 6:44 am | Product Releases | Comments

Model 1702 DC-to-AC inverter provides up to 2,000 VA in a 3.5-inch (2U) rack mount enclosure. Available in 48 V DC or 130 V DC input versions, the inverter features a well-regulated 115 V AC, 60 Hz sine-wave output with quartz-clock frequency stability, minimal output-waveshape distortion (1 - 3%), high power conversion efficiency (83%) and low no-load input power consumption....

Advertisement

Metalized Ceramic Substrates

September 27, 2002 6:44 am | Product Releases | Comments

Remtec introduces a new fine line resolution thick film capability that permits circuit designers to integrate more functions and improves performance in a smaller package. Using the fine line capability, microcircuit designers can achieve the performance of thin film products at a lower cost. Line definition and tolerances of ± ....

Ceramic Chip Capacitors

September 27, 2002 6:44 am | Product Releases | Comments

The X5R series ceramic chip capacitor features temperature variation of capacitance within ± 15% from – 55° to +85°C and is available in high capacitance values. The X5R series is available in sizes 0402, 0603, 0805, 1206, and 2220. the capacitance tolerance is ± 10% and the capacitance range is 0....

Linear Power Amplifier Module

September 27, 2002 6:44 am | Product Releases | Comments

Model CHP0205-QM is designed for transmit functions in CDMA2K 1X (3G) cellular multi-mode, data-enabled handset applications. The amplifier operates from 824 to 849 MHz and offers 36% linear power added efficiency, +28 dBm output power, 50 ohm internal matching, and on-board DC power down mode. The device is packaged in a 4 × 4 × 1....

Miniature Power Supply

September 27, 2002 6:44 am | Product Releases | Comments

Less than an inch wide with a 15 W output, the MINI-POEWR has an input capability of both AC and DC voltages (85 - 265 V AC and 90 - 250 V DC). Capable of switching large capacitive loads, the 24 V DC power supply has a 3.75 kV isolation between input and output. The power supply operates in the temperature range of – 25°C to 60°C....

SMD Clock Crystal

September 27, 2002 6:44 am | Product Releases | Comments

The Mini SMD IL3X is an X-cut clock crystal at 32.768 MHz. The SMD package measures 3.2 × 1.2 × 1.0 mm. Frequency tolerance is ± 20 ppm at 25°C....

Low Profile MINI-DIN

September 27, 2002 6:44 am | Product Releases | Comments

The KMDR series is made from PBT thermoplastic and the shield is tin plated steel. Contacts are gold plated with tin/lead on termination. The standard pin layout is available in 4 and 6 contact counts, and the GEO-port in 7 and 9 contact counts....

Phase Locked Loop

September 27, 2002 6:44 am | Product Releases | Comments

The SCG4521 model has a primary LVPECL OC-3 output and a secondary (OC1) CMOS reference output. Both outputs have a maximum 40/60 duty cycles and are phase locked to one of two selected input references. The SCG4521 phase locked loop relies on a fundamental frequency, low jitter, voltage controlled, crystal oscillator....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading