Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Quadrature Demodulator

March 28, 2003 3:52 am | Product Releases | Comments

The AD8348 high performance broadband quadrature demodulator is designed to enable IF-to-baseband conversion from 50 MHz to 1 GHz. In addition to the demodulator, which includes a dual mixer core and local oscillator phase splitter, the AD8348 integrates a 45 dB linear-in-dB variable-gain amplifier (VGA) and single-ended to differential amplifiers for driving baseband ADCs....

Quad-Band Receivers

March 28, 2003 3:52 am | Product Releases | Comments

The enhanced POLARIS™ TOTAL RADIO™ transceiver provides quad-band and direct conversion capabilities. The POLARIS transceiver is comprised of the RF6001 mixed-signal processor, the RF3133 power amplifier module with integrated power control and either of two new receivers — the RF2710 or RF2716....

Phase Locked Sources

March 28, 2003 3:52 am | Product Releases | Comments

These BCO series phase locked sources offer excellent phase noise and spurious performance in a 2.25 × 2.25 × .55 inch package. Available in frequencies from 500 MHz - 14 GHz, it operates from either an external reference or internal TXXO with stability as low as 1 ppm. Flexible internal DC regulators allow operating DC or 5....

Advertisement

Permanent-Mount Antennas

March 28, 2003 3:52 am | Product Releases | Comments

The LP series antennas are 1/4-wave antennas that mount directly to a product's PCB via a single screw. The antennas are available in standard or custom frequencies within the 260 MHz - 1 GHz range. a precision internal helical element significantly reduces the antenna's size. The series exhibit a 50 Ω characteristic impedance and a VSWR of less than 1....

RF Inductors

March 28, 2003 3:52 am | Product Releases | Comments

The CF1008 surface mount inductor series has low inductance values and high current ratings. The models provide inductance values ranging from 0.10 microHenries to 1 microHenry....

Programmable Power Supply

March 28, 2003 3:52 am | Product Releases | Comments

The DCSE 3 kW incorporates high frequency current mode switching for minimum ripple and is packaged in a compact 3.5 inch high chassis. The DCSE 3 kW is available in multiple voltage ranges from 8 to 150 V DC with optional IEEE-488 or isolated analog remote programming....

Battery Contact

March 28, 2003 3:51 am | Product Releases | Comments

Developed for portable electronic devices, the BC-501-1 SMT batter contact produces high-reliability spring contact due to its design. The free standing BC-501-1 contacts can be randomly placed on a circuit board. The BC-501-1 is manufactured from phosphor bronze flat wire with gold plating, 10 micro inches thick over nickel....

TOPICS:

Selectable Output VCXO

March 28, 2003 3:51 am | Product Releases | Comments

Connor-Winfield introduces a surface mount, selectable output VCXO suitable for use in telecom applications. The engineer can specify 3 frequency options at the design stage in the 100 to 200 MHz range. The VPLB434J3E meets SONET phase jitter requirements and are available with stabilities as tight as ± 20 ppm....

Advertisement

Ferrite Chip Inductors

March 28, 2003 3:51 am | Product Releases | Comments

These large, wire wound ferrite chip inductors fill the needs of low power filter processing and higher power signal processing circuits. They are designed for optimum performance in the 10 to 100 MHz range. typical applications range from large RF circuit board assemblies to small handheld portable devices....

Inverter Transformer

March 28, 2003 3:51 am | Product Releases | Comments

J.W. Miller introduces a cold cathode fluorescent lamp (CCFL) inverter transformer series in a surface mount package. This device is an integral component used in power supplies for producing the high voltage needed to initiate lamp operation for back-lighting of LCDs. Key performance characteristics include an operating frequency of 60 kHz ± 25%, operating temperature of 0 to +75°C, and dielectric strength of 1500 Vrms....

A/D Board

March 28, 2003 3:51 am | Product Releases | Comments

Model PCI-417N features 32, 80 kHz, analog input channels with 14-bit A/D resolution. Full scale input voltage ranges of ± 5 V or ± 10 V are selectable per channel....

Shielded Cables

March 28, 2003 3:51 am | Product Releases | Comments

These audio snake cables are for use in broadcast and high end audio applications requiring a plenum rated cable. Part number SN1624PL consists of 16 individually shielded and jacketed pairs with an overall jacket. The digital versions (24XPL Series) are also available in constructions of 2 - 24 pair with color coded conductors and no inner jackets....

Data Acquisition Systems

March 28, 2003 3:51 am | Product Releases | Comments

The new Cougar series consist of a modular digitizer package housed in a compact (342 × 346 × 106 mm) 6U CompactPCI 3-slot crate; a fast interface (100 Mbytes/s) that connects directly to any PCI slot of a Pentium-based PC; one or more 12-bit Compact PCI digitizer cards; and powerful software drivers....

SFP Transceiver

March 28, 2003 3:51 am | Product Releases | Comments

The RJ45 SFP (small form-factor pluggable) transceiver offers gigabit Ethernet speeds over Category 5 unshielded twisted-pair copper cable. The transceiver operates from a single +3....

Thin Film Substrates

March 28, 2003 3:51 am | Product Releases | Comments

OhmCraft's thin film resistor-conductor substrates are manufactured using TantaMax™ high reliability low TCR thin film technology. The thin films are based on a multi-layer composite film having an overlayer of tantalum nitride which imparts environmental stability that exceeds nichrome thin film the substrates are corrosion resistant, with ultra high stability, absolute TCR to 10 ppm/°C, TCR tracking to 1 ppm/°C, tight absolute...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading