Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

SMD Isolators

March 15, 2004 9:53 am | Product Releases | Comments

Temex to introduces a range of RoHS compliant SMD isolators, designed to protect other microwave components from excessive signal reflection, and covering the frequency range 380- 430 MHz. The isolators have a typical isolation of 12 dB, a VSWR of 11 dB and insertion loss of 1dB. Devices are available in clockwise and counter-clockwise versions, with forward power input of 10 W and reverse power of 2 W....

Component Analyzer

March 15, 2004 9:53 am | Product Releases | Comments

Advantest introduces the R3860A RF component analyzer that features a four port receiver architecture at 20 GHz and a sweep speed of 5 ms/point. The R3860A's receiver-per-port design eliminates matrix switching of ports to receivers and has been developed to measure RF hybrid modules and multi-port devices used in multiband mobile handsets, WLAN devices, radars, and satellite equipment....

RF Testers

March 15, 2004 9:53 am | Product Releases | Comments

The R&S CBT and the R&S CBT 32 from Rohde & Schwarz are two Bluetooth testers for development, production and verification. The test sequences are in line with specifications and can be set according to user requirements. A built-in "dirty transmitter" simulates impure signals to test the behavior of user equipment under realistic conditions....

Advertisement

FBAR Duplexer

March 15, 2004 9:53 am | Product Releases | Comments

Agilent announces a film bulk acoustic resonator duplexer for handsets, data cards, and other wireless products operating in the U.S. frequency band. The ACMD-7401 is built with Agilent's Microcap bonded-wafer chip scale packaging. This process allows the small filters to be assembled in a molded-chip-on-board (MCOB) module that is less than 1....

Frequency Converter

March 15, 2004 9:53 am | Product Releases | Comments

Anritsu introduces the FCN4760 frequency converter that can be used with its Spectrum Master( MS2711D to conduct interference analysis measurements on IEEE 802.11a networks. Covering 4.7 GHz to 6.0 GHz, the MS2711D/FCN4760 combination is designed for field use by fixed wireless engineers to ensure the proper design, deployment, and optimization of Wi-Fi networks....

Network Analyzers

March 15, 2004 9:53 am | Product Releases | Comments

Advantest introduces the R3768/R3770 network analyzers that incorporate a four port receiver architecture developed to measure multi-port passive components designed into multiband mobile handsets, WLAN devices, radars, and satellite equipment. The R3768 has a measurement frequency range of 300 kHz to 8 GHz while the R3770 goes up to 20 GHz....

Online Engineering Tool

March 15, 2004 9:53 am | Product Releases | Comments

AVX announces SpiCAP version 3.0, an online engineering tool that generates the frequency response and characterizes AVX ceramic chip capacitors based on user inputs. The Windows-based software provides parameters required for SPICE-based computer modeling and circuit simulations of MLCCs including high capacitance X5R as well as low inductance varieties....

802.11g Wireless LAN Solution

March 15, 2004 9:53 am | Product Releases | Comments

Atheros announces a complete single-chip IEEE 802.11g WLAN solution, the AR5005G. The chip integrates an 802.11g solution -- Media Access Controller (MAC), baseband processor, and a 2.4 GHz radio, in an integrated digital CMOS design. Atheros has integrated many discrete components of previous 802....

Advertisement

Front-end Modules

March 15, 2004 9:53 am | Product Releases | Comments

Epic Communications introducea an RF front-end module FM2402 to complement its family of RF power amplifier products. The product is designed to replace as many as 60 RF and passive components and can drop-in to developers' and manufacturers' WLAN 802.11b/g end-products. The module uses Epicom's linearized power amplifiers (patent pending), providing improved power efficiency and greater range while maintaining data accuracy....

Wireless Network Transmission System

March 15, 2004 9:53 am | Product Releases | Comments

Stratex announces the availability of the Eclipse wireless network transmission system. The system enables wireless network node configurations in the smallest form factor available, supporting up to six independent radio traffic paths from a modular Intelligent Node Unit (INU). A TDM bus architecture enables traffic routing between traffic paths by software, without local cabling....

Radio System on a Chip

March 15, 2004 9:53 am | Product Releases | Comments

Cypress announces its WirelessUSB LR device (CYWUSB6935), a 2.4 GHz radio system-on-a-chip solution delivering up to 50 m or more of wireless connectivity for commercial and industrial applications. The solution's applications long range commercial and industrial multipoint-to-point applications, including building and home automation, industrial control, utility metering, transportation, paging systems, and presentation equipment....

RF Solution

March 15, 2004 9:53 am | Product Releases | Comments

Ember announces a 2.4GHz /250Kbps RF solution that complies with the new IEEE 802.15.4 standard. In addition to enabling lighting, temperature and security applications, the EM2420 can also support applications for remotely controlling industrial devices in facilities such as factories and wastewater treatment plants; monitoring physical infrastructure such as roads and bridges; and mobile applications such as temperature and humidity monit...

SMT Frequency Synthesizers

March 15, 2004 9:53 am | Product Releases | Comments

SLX-series surface mount frequency synthesizers from EM RESEARCH feature fixed-frequency or serially-programmable outputs in bands from 100 MHz to 3 GHz. Bandwidths are available from octave at fc >= 600 MHz to 20% bandwidths at 2.5 GHz. Customer-specified step sizes range from 10 KHz to 1 MHz. At 1 GHz frequency output, typical phase noise characteristics are 㫲 dBc/Hz at 10 KHz and 𤩣 dBc/Hz at 100 KHz offsets; at 3 GHz frequen...

Stand-alone VCOs

March 15, 2004 9:53 am | Product Releases | Comments

National Semiconductor introduces the first member of a family of stand-alone, monolithic VCOs for mobile handsets. The LMX2604 is designed for the GSM and GPRS cellular markets. The product provides on-chip RF VCOs for GSM at 880 MHz to 915 MHz, for DCS at 1710 MHz to 1785 MHz, and for PCS at 1850 MHz to 1910 MHz....

Free Running DROs

March 15, 2004 9:53 am | Product Releases | Comments

Raditek's new Free Running DROs have coverage from 4.5 to 48GHz and better than 1ppm/ºC stability. Good VSWR with low noise and power consumption accompanied by small size makes this a stable platform. With manual frequency tuning standard on all models, electronic frequency control is available as an option....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading