Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Automated RF Component Assembly Cell

August 30, 2001 9:29 am | Product Releases | Comments

Palomar Technologies, an innovator in high-precision automated assembly systems for broadband communications, introduces the HotRail™ RFA (Radio Frequency Assembly) Cell for automated assembly of RF power amplifier components. The new automation system lowers the cost of production for power amplifiers used in wireless base stations, ultimately helping wireless carriers lower their costs to subscribers....

90 Degree Hybrid Coupler to 20 GHz

August 30, 2001 9:29 am | Product Releases | Comments

A special non-uniform tapered line design synthesized with a specially developed Krytar CAD program yields good amplitude and phase imbalance specifications. Model 1831 operates over the entire frequency band of 1.0 - 18 GHz. Coupling is 3 dB. Amplitude imbalance is ± 10 degrees maximum (tighter phase and amplitude imbalance available)....

Ferrite Chip and Power Beads

August 30, 2001 9:29 am | Product Releases | Comments

Spectrum Control introduces the newest addition to its SPECWAVE line of wireless components. Spectrum's ferrite chip beads (FCB) and ferrite power beads (FPB) offer design flexibility through standard EIA/EIAJ sizes in a wide array of electrical values for EMI attenuation applications. These ferrite chip and power beads provide EMI attenuation while eliminating the need for grounding, and the multilayer construction provides a closed magnet...

Advertisement

Leaded and Chip Ceramic Resonators

August 30, 2001 9:29 am | Product Releases | Comments

Leaded and chip surface-mounted ceramic resonators are now available from Spectrum Control. The leaded ceramic resonators feature a built-in load capacitance. This feature eliminates the need for external load capacitors necessary for traditional filter design. No adjustment is necessary after completion of the circuit; the oscillator will perform at the originally designed frequency....

Surface Mount Chip Resistor

August 30, 2001 9:28 am | Product Releases | Comments

Providing design engineers with a space-saving alternative to bulky wirewounds, IRC has developed a series of surface mount resistors available in standard and non-standard values capable of dissipating up to 3 watts at 70°C. Designated the SC3 Series, these thick-film resistors are less inductive than typical wirewound devices and require 75 percent less board space....

Compact Ceramic Duplexer for PCS-CDMA

August 30, 2001 9:28 am | Product Releases | Comments

TOKO announces the TDPH-1880L-13 ceramic duplexer specifically designed for PCS-CDMA systems including mobile handsets, wireless modems, and telematics applications. This duplexer has a 19.9 mm × 6.6 mm footprint with a low profile of only 4.1 mm maximum. TOKO's proprietary ceramic material and filter design expertise provide for exceptional product reliability with competitively high attenuation characteristics, low insertion loss, and...

Batteries

August 30, 2001 9:28 am | Product Releases | Comments

The newest addition to the EnerSys line of Phoenix batteries increases performance up to 8% at the 15 minute rate over batteries with the same footprint. The PHX12-475, a valve regulated Lead-Tin battery designed for high rate applications, uses absorbent glass mat (AGM) technology to retain acid between plates and enhance battery cyclability during normal UPS operation....

Cellular Band VSWR Monitor

August 30, 2001 9:28 am | Product Releases | Comments

Narda's low-cost VSWR monitor provides an ideal solution for service providers who only need a Form-C relay closure when a Tx VSWR failure occurs. Model 8460LP-N2 operates from 869 to 994 MHz. It samples the forward and reverse power and calculates the VSWR through a high directivity coupler. Forward and reverse sampling ports are also provided....

Advertisement

Power Toroid in a Surface Mount Package

August 30, 2001 9:28 am | Product Releases | Comments

API Delevan introduced it new Series PTHF-SM and PTKM-SM power toroids in a surface mount package with inductance values ranging from 10 uH to 1000 uH. Resistance values are as low as 0.01 ohms and current ratings are up to 7.36 amps. The toroid core provides good shielding properties. The series offers four package sizes....

Cables

August 30, 2001 9:28 am | Product Releases | Comments

MICRO-COAX announced that its UTiFORM, UTiFLEX, and semi-rigid cable series feature minimal insertion loss and VSWR at frequencies as high as 65 GHz. The high performance of the cables at higher frequencies makes them good choices for design into equipment and systems operating at broadband data rates such as 10 GB/s and 40 GB/s....

100 Ohm Cables

August 30, 2001 9:28 am | Product Releases | Comments

A new family of 100 ohm cables designed for the emerging InfiniBand™ form factor architecture, to meet the high-bandwidth demands of highly scalable, highly available distributed computing systems, have been introduced by Montrose/CDT. Montrose/CDT Infinxx™ Cables are individually shielded parallel pair constructions offered in InfiniBand 1X, 4X, and 12X form factors with conductors from 18 to 30 AWG, depending upon type....

Electronic Grade Foam Protect Components

August 30, 2001 9:28 am | Product Releases | Comments

E-A-R Specialty Composites has developed a non-silicone formulation of its highly damped, slow-recovery CONFOR® foam, specifically to address the shock protection needs of today's miniaturized computers, hand-held electronics, and personal digital assistants (PDAs). Used as shock pads, spacers, or snubbers, energy-absorbent CONFOR CF-45E foam helps protect delicate components from shock and vibration, with no silicone off-gassing....

High Precision A/D Converter

August 30, 2001 9:28 am | Product Releases | Comments

The MAS9316 is a fast, 16-bit monolithic CMOS multiplying D/A converter designed for direct microprocessor interface. Applications include high-end audio, instrumentation, and other μP controlled systems. Its high relative accuracy and monotonicity is achieved without laser trimming. This is made possible by the use of a highly accurate, low TCR thin film resistor process and a 4 MSB to 15 decoding design technique....

DC Input Added to Six Output Switcher

August 30, 2001 9:28 am | Product Releases | Comments

UNIPOWER's new PowerCassette® is now available as a DC-input power supply in addition to the previously introduced AC input version. The DC input voltage range is 36 to 72 V DC with inrush current limiting; the input has an EMI filter and fast transient and surge protection. PowerCassette is specifically designed for today's advanced networking, storage, and communications needs....

Synthesizer for RF and Microwave Signal Generation

August 30, 2001 9:28 am | Product Releases | Comments

Anritsu introduces the MG3690A synthesizer, a single-instrument solution that combines the bandwidths of separate RF and microwave signal generators with the spectral purity and frequency stability of a phase-locked source. The MG3690A's ability to achieve crystal-oscillator-like phase noise over the 0....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading