Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

VCOs

April 29, 2003 7:27 am | Product Releases | Comments

The VLB-series covers a frequency range from 70 MHz to 3.5 GHz. The full selection includes narrowband devices with a tuning range of 10% of center frequency, up to wideband devices covering an octave to ease circuit design and board layout. Phase noise performance is typically 𤩨 dB/Hz at 100 kHz....

Test Cable

April 29, 2003 7:27 am | Product Releases | Comments

The MegaPhase® SuperFlex™ 26.5 GHz test temperature stable cable is phase and amplitude stable with temperature stability of < 7 ppm per °C from – 40° to +125°C. Operating temperature range is – 70° to +121°C. The phase and amplitude change versus flexure, measured for a 360° wrap around a 4....

Electrochemical Capacitors

April 29, 2003 7:27 am | Product Releases | Comments

AVX announces advances to the BestCap™ (Battery Energy Saving Technology Capacitor) series of electrochemical supercapacitors. Standard voltage specifications are 3.5 V, 5.5 V, 7 V, 9 V, and 12 V with available capacitance values between 22 and 560 milliFarads. ESR values range from 350 down to 25 milliOhms and maximum leakage current from 5 to 40 microamps, depending on size....

Advertisement

System-on-Chip

April 29, 2003 7:27 am | Product Releases | Comments

The STi5517 is the latest member of STMicroelectronics' OMEGA family of STB decoder solutions. The device is pin compatible with the STi5516. The device has an enhanced ST20 32-bit RSIC CPU with a 180 MHz clock, 8 Kbytes of instruction cache, 8 Kbytes of data cache, and 8 Kbytes of embedded SRAM....

Decoder IC

April 29, 2003 7:27 am | Product Releases | Comments

The CMX823 is a high performance, low power, audio tone decoder. It supports user defined tones from 280 kHz to 3.5 Hz and allows users to create their own one frequency 'alphabet' to support standard and non-standard tone paging and radio systems. With 0.75 mA typical operating current and a power save mode, the CMX823 is suitable for battery powered applications....

Multi-Chip Module

April 29, 2003 7:27 am | Product Releases | Comments

Traquair announces the ultra-compact UC1394a-1 Firewire interface and embedded DSP multi-chip module. The UC1394a-1 uses embedded Firewire peripheral interface devices that provide easy-to-use Firewire connectivity and processing solutions. Implemented as a 30 × 36 mm PLCC surface mount device, the UC1394a-1 combines the resources necessary to interface and control almost any hardware peripheral....

Step-Down Regulator

April 29, 2003 7:27 am | Product Releases | Comments

The LTC3403 is a high efficiency, 1.5 MHz, synchronous buck regulator with an integrated bypass MOSFET that can deliver up to 600 mA of continuous output current from an 8-lead DFN package. The LTC3403 operates from an input voltage range of 2.5 V to 5 V making it ideal for single cell Li-Ion cellular applications....

Power Management Device

April 29, 2003 7:27 am | Product Releases | Comments

The XC6403 includes a LDO voltage regulator and voltage detector in one single-chip package. With a power consumption of 30 μA (less than 0.01 μA in standby), the XC6403 is ideal for Bluetooth and WLAN. The series provides regulated low-noise outputs, and can be configured to monitor various parts of the circuit including the input, battery level check; and the output, similar to a power 'OK' function....

TOPICS:
Advertisement

DSP Chip

April 29, 2003 7:27 am | Product Releases | Comments

Agere Systems introduces a DSP chip using low-k dielectric 130 nanometer (nm) (.13 micron) technology. The DSP16411 chip processes voice, data, and video signals. The high-performance, all-copper semiconductor technology accelerates chip speed, reduces power consumption, and lowers electronics costs....

Potentiometer Chips

April 29, 2003 7:27 am | Product Releases | Comments

The WinPot WMS7201 is a single channel IC. The WinPot WMS7204 is a quad channel IC. Both chips feature 256-taps, a selectable output buffer and ultra-low standby current (1 μA maximum with output buffer inactive). The WMS7201 and the WMS7204 are available in 10 KΩ, 50 KΩ, and 100 KΩ resistance values....

Surface Mount Diplexer

April 29, 2003 7:27 am | Product Releases | Comments

Model 2KCZ30-800/H1900 is designed for use on dual-band transceiver cards, whereby a single wide-band input can be split into separate cellular/PCS band specific paths, or two separate band specific paths can be combined to form a single wide band output. The device is configured as two filters, one highpass and one lowpass, with one port of each filter diplexed into a common junction, creating a 3-junction device....

Packaging Solution

April 29, 2003 7:27 am | Product Releases | Comments

StratEdge offers high performance microelectronic packaging solution. StratEdge designs and manufactures ceramic and glasswall packages for devices from DC through 50+ GHz, performs complete assembly to microwave quality, marks the product, trim and forms the leads as required, and fully tests the device before shipment....

Laser Diode Test System

April 29, 2003 7:27 am | Product Releases | Comments

In the System 25, Keithley combines their light-current-voltage (LIV) measuring instruments with unique accessories and cables, and supplies the complete package for less than individual components. System 25 allows customers to choose only the features and performance they need. System 25 provides up to 5 A laser drive current, precision voltage measurements, two channels of photodetection, selectable photodiode detector types, optional la...

Wireless Transceivers

April 29, 2003 7:27 am | Product Releases | Comments

The NL6000 is designed to meet FCC narrowband requirements. The NL6000 operates at 12 Kbps on narrowband channels and 22 Kbps on a wide band channel. The unit is configurable to operate in both wireless telemetry and mobile data. Transmit power adjustable from 1 - 6 watts allow mobile, fixed, and solar operations....

SMT Cable Connector

April 29, 2003 7:27 am | Product Releases | Comments

The ERNI Group introduces a connector in SMT technology with a 1.27 mm pitch to provide a reliable connection from the board to external cables. The connector enables the connection between a PCB and an IDC ribbon cable with one component. The ribbon cable is easy to assemble with application tools developed for this purpose....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading