Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Test Assemblies

May 2, 2005 6:09 am | Product Releases | Comments

W. L. Gore announces the GORE™ PHASEFLEX® 110 GHz test assemblies. These test assemblies, with performance through 110 GHz, offer torque and crush resistance, as well as stability with flexure and temperature, all while remaining flexible. The devices provide good phase and amplitude stability with flexure over a wide temperature range....

Single-cycle 8051 Core

May 2, 2005 6:09 am | Product Releases | Comments

Atmel® announces its AT89LP family, based on a single-cycle 8051 core. An operating voltage range of 2.0 to 5.5 V is offered to accommodate power management, white goods and battery-operated applications. The AT89LP CPU requires one clock cycle for every byte fetch. The core is capable of 20 MIPS throughput at 20 MHz clock frequency....

Multi-channel A/D Converter

May 2, 2005 6:09 am | Product Releases | Comments

Linear Technology introduces the LTC1867L, a 16-bit, 8-channel, 175 ks/s, 3 V supply analog to digital converter. The converter draws 2.7 mW MAX at full speed. The power automatically drops at reduced speeds, typically 0.9 mW at 50 ks/s. This device maintains good DC performance providing 16-bit no missing codes over temperature and ± 3 LSBMAX INL....

Advertisement

High Pass Filter

May 2, 2005 6:08 am | Product Releases | Comments

The 4HPD-2000/A18000-SR from Lorch is a broadband bi-directional high pass filter. The filter features a 1 dB typical cut off of 2000 MHz. The insertion loss is 1....

GPS Receiver and Cell Modem

May 2, 2005 6:08 am | Product Releases | Comments

WinSystems introduces the PCM-GPS, a PC/104 module that adds both GPS and cell modem support on a single card. The GPS receiver provides complete position, velocity and time information while the cell modem supports standards-based multi-band GSM/GPRS and CDMA. This board is suitable for both fixed and mobile applications that require navigation, tracking, data logging, timing and/or communication functions....

SAW Filter Family

May 2, 2005 6:08 am | Product Releases | Comments

TriQuint introduces a family of GSM/GPRS/EDGE SAW filters in a 1.5 × 1.5 × 0.76 mm package. These filters (p/n 856441 [GSM850], 856387 [GSM900], 856409 [DCS], and 856417 [PCS]) enable designers to achieve a good noise figure. Reliability is assured by full hermeticity within the SAW packages....

Dual/Quad DACs

May 2, 2005 6:08 am | Product Releases | Comments

Maxim introduces the MAX5108/MAX5109 (dual) and MAX5115/MAX5116 (quad) nonvolatile, rail-to-rail, buffered, 8-bit D/A converters (DACs). These devices have a high-speed two-wire I(2)C interface that accepts data rates up to 400 ks/s. The devices are also guaranteed monotonic over the full operating temperature range....

Optical Module Option

May 2, 2005 6:08 am | Product Releases | Comments

Agilent announces an 8X Fiber Channel measurement capability, using the 86105C high-sensitivity, broad-wavelength multi-rate optical module and 83496A multi-rate clock recovery module for the 86100C Infiniium digital communications analyzer (DCA-J). The combination provides test-system flexibility and coverage for new rates as they emerge....

Advertisement

Time Correlation Application

May 2, 2005 6:08 am | Product Releases | Comments

Agilent introduces a time correlation application that provides a seamless integration between Agilent's Windows® XP-based logic analyzers and its real-time oscilloscopes. The Agilent E5850A gives designers the ability to capture real-time oscilloscope signals with up to 13 GHz bandwidth, correlate them to key digital signals on their logic analyzer — including a 1....

PLL Circuit Design Tool

May 2, 2005 6:06 am | Product Releases | Comments

Analog Devices releases a new version of its phase-locked loop (PLL) circuit design and evaluation tool. ADIsimPLL™ Version 2.7 features enhanced synthesis and simulation capabilities, as well as expanded libraries and Web access. This version supports simulations of all key non-linear effects that impact PLL performance....

Silicon Oscillators

May 2, 2005 6:06 am | Product Releases | Comments

Linear Technology announces a family of silicon oscillators, the LTC6905-xxx, generating a fixed frequency clock output from 20 to 133 MHz. These oscillators provide a timing solution for FPGAs, CPLDs, microprocessors and DSPs. The family features a consistent startup (100 us typical), low duty cycle variation (± 2....

Broadband Cable and Antenna Analyzers

May 2, 2005 6:04 am | Product Releases | Comments

Anritsu introduces the Broadband Site Master S810D/S820D cable and antenna analyzers that provide wide frequency bandwidth, allowing for the detection of faults in cables and antennas used in wireless backhaul and defense applications. The models, which cover 25 MHz to 20 GHz (S820D), provide increased frequency coverage, performance and functionality in a portable instrument....

RF Connector

May 2, 2005 6:04 am | Product Releases | Comments

Corning Gilbert announces a push-on, high-performance, microwave interconnect system. The G3PO connector can be used in radar systems, telecommunications and wireless basestation equipment, satellite systems, antenna arrays, etc. The connectors support increased package density with center-to-center spacing of 0....

Microwave Horn Antenna

May 2, 2005 6:04 am | Product Releases | Comments

AR Worldwide introduces a lightweight microwave horn antenna that is capable of supplying the high intensity fields necessary for RFI/EMI immunity or susceptibility testing. The model AT4010 is a wide band, high gain, high power antenna that is small and portable, yet tough enough for the extra demands of outdoor use....

Voltage Divider

May 2, 2005 6:04 am | Product Releases | Comments

Providing military and aerospace analog design engineers with a two-element resistor network in a 1206 chip package, TT Electronics IRC Advanced Film Division has developed a military voltage divider that provides two matched resistors with absolute and ratio tolerances on a single chip. The D1206 series is composed of two TaNFilm® tantalum nitride resistors on ceramic substrate, packaged on a standard 1206 size chip....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading