The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Calibrated Eb/No Module

February 25, 2003 12:13 pm | Product Releases | Comments

Micronetics Noise Products Group introduces a filtered and calibrated noise module to quickly and easily set up Eb/No ratios for bit error rate (BER) testing of 70 and 140 MHz modems. Absolute No output is accurately calibrated at the filter output eliminating the need to make a noise power measurement in the test procedure....

Microwave Amplifier

February 25, 2003 12:13 pm | Product Releases | Comments

OPHIR RF announces Model 5143, a robust, load tolerant 0.7 - 3.0 GHz 50 W solid-state amplifier. Covering all the major wireless telecom bands, this amplifier is suited for RF device and component testing. Model 5143 has a minimum small signal gain of +48 dB and offers IEEE/RS-232 interface as an option....

RF Power Analyzer

February 25, 2003 12:13 pm | Product Releases | Comments

Keithley's Model 2800 RF Power Analyzer is optimized for high speed RF testing of wireless phones, RFIC power amplifiers, and related RF power devices. This compact, ready-to-run instrument comes pre-configured with the appropriate frequencies, channel numbers, offsets, etc. specific to the latest wireless standards....


Field Test Solution

February 25, 2003 12:12 pm | Product Releases | Comments

The Cell Master™ is an addition to Anritsu's family of handheld field test solutions. Combining the functionality of a cable and antenna analyzer, spectrum analyzer, power meter, and T1/E1 analyzer in a durable instrument that is less than 5 pounds, Cell Master allows users to perform an array of verification tests and signal analyses with a few keystrokes....

RF Peak Power Meters

February 25, 2003 12:12 pm | Wireless Design & Development | Product Releases | Comments

Boonton Electronics' 4400/4500 Series peak power meters offer an option enabling the instrument to trigger on events, as well as time. This allows a user-selected pulse to be captured, even when its timing is variable. The 4400A is for viewing and analyzing RF power in the time domain. Fast display updates and GPIB measurements save time and gather information fast....

Verification Application

February 25, 2003 12:07 pm | Product Releases | Comments

Agilent has integrated their EDA software with their test instrumentation to allow designers to verify designs earlier in the design process. Integration of ADS software and Agilent test instrumentation provides measurement-based modeling, verification and debugging capabilities. Common algorithms are used to provide consistency between ADS simulation results and test measurement results....

Combiner/Duplexer Assembly

February 25, 2003 12:07 pm | Product Releases | Comments

The WSA-00136 is designed for China Telecom and other international communication tetra systems. The WSA-00136 is modular in design and can be fitted for rack mountable use. The Combiner, Duplexer assembly incorporates two transmit filters and one receive filter in one common port. Additional components include isolators for each transmit filter, one dual directional coupler and lowpass filters to maintain excellent rejection up to 12....

WCDMA Scanning Receiver

February 25, 2003 12:07 pm | Product Releases | Comments

This dual band WCDMA Scanning Receiver provides service-critical measurement for 3G wireless WCDMA networks in the 850/1900 bands. Features include a signal acquisition time as fast as 60 milliseconds; a spectrum analyzer; enhanced frequency agility; and greater signal sensitivity. The product also features rake receiver capability, which determines exactly where a mobile phone will have reception problems....


Low Jitter VCSO

February 25, 2003 12:07 pm | Product Releases | Comments

The QES211 series has a frequency range of 2.0 GHz. These voltage controlled SAW oscillators (VCSOs) cover the frequency range of 150 MHz - 800 MHz. Phase noise for the devices at 1 kHz is – 90 dBc/Hz or better, allowing jitter to be reduced to less than 0.2 ps rms. The QES 211 series features sine outputs, displays ± 50 ppm absolute pulling range, and operates from – 40°C to +85°C, at 5 V supply voltage....

Ferrite Materials

February 25, 2003 12:07 pm | Product Releases | Comments

The P1 and P2 Series are available in a range of core shapes and sizes for use in high power system functions. Both materials are specifically designed for applications requiring low power loss in the frequency range of 25 kHz - 200 kHz and are optimized for operating at temperatures between 80°DC - 100°C....

Power Drawer Connector

February 25, 2003 12:07 pm | Product Releases | Comments

Anderson introduces the 35 and 75 amp Power Drawer connector. The connectors are used on N+1 power supply and inverter systems for a variety of applications. The 75 amp Power Drawer can be configured with up to four #8 awg, nine #12 awg, and twenty-four #20 awg contacts. Both pin and socket contacts are available with crimp, solder cup or printed circuit board termination....

Coaxial Relay Modules

February 25, 2003 12:07 pm | Product Releases | Comments

0 The SMP6103 1 × 31 coaxial tree and SMP6301 (4) 1 × 4 self-terminated coaxial trees ensure that excellent crosstalk and isolation specifications are maintaining by using RF relays with bandwidths that exceed 2 GHz and low-loss coaxial interconnect cabling. The modules are configured to avoid unterminated stub effects, thus improving signal integrity and permitting larger high-frequency multiplexer configurations to be implemented...

Push-Pull DIN Connectors

February 25, 2003 12:07 pm | Product Releases | Comments

MECA introduces a family of phase and amplitude matched Wilkinson power divider/combiners furnished with quick-mating 1.0/2.3 push-pull DIN connectors for ease of cabling on system applications from 0.800 - 2.200 GHz. Standard models are available in 2, 3, and 4-way configurations and provide high isolation, low insertion loss and exceptional VSWR....


February 25, 2003 12:07 pm | Product Releases | Comments

The LTC2412 is a 24-bit No Latency Delta Sigma™ ADC that offers two fully differential input channels and a differential reference input. Low noise of 800 nVRMS provides 22.5 effective number of bits (ENOBs) over a ± 2.5 V span and 16.9 ENOBs over a ± 50 mV span. Operating from a single 2....

CDMA Transmitter

February 25, 2003 12:07 pm | Product Releases | Comments

Crocodile™ CDMA Transmitter now features an optional internal CW module allowing Crocodile to transmit a continuous wave signal from 25 to 45 watts (cellular) or 10 to 20 watts (PCS) depending upon the configuration. Both CDMA and CW are housed together in the same portable, ruggedized case weighing 24 pounds....


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.