The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Analog and RFIC Design Software

July 2, 2004 6:44 am | Product Releases | Comments

Applied Wave Research, Inc. (AWR() announces Analog Office 2004 software for next-generation analog and radio-frequency integrated circuit (RFIC) designs. The Analog Office 2004 toolset spans the entire IC design flow, from system-level to circuit-level design and verification, for complete top-to-bottom and front-to-back high-frequency design....

BCD Process

July 2, 2004 5:23 am | Product Releases | Comments

PolarFab introduces a BCD (Bipolar-CMOS-DMOS) process that permits designers to fabricate analog and mixed-signal integrated circuits operating up to 60 V. The robust PBC3 process offers a solution for a range of power management and smart-power applications for consumer, automotive, and industrial markets such as motor drivers, power interface drivers, and power regulations circuits....

RF Detector

July 2, 2004 5:23 am | Product Releases | Comments

Analog Devices introduces the AD8318, a highly integrated wide dynamic range SiGe logarithmic amplifier. The device provides a temperature compensated output voltage for input frequencies from 1 MHz up to 8 GHz. This device has been specified for use at the cellular 900 MHz, 1900 MHz, 2.2 GHz frequencies, and at 3....


DC/DC Converter ICs

July 2, 2004 5:23 am | Product Releases | Comments

The XC9110/9111 series is a group of PFM controlled step-up DC/DC converter/controller ICs designed to generate low supply voltage by the combination of PFM control and CMOS structure. The series is suitable for applications where a longer battery life is needed such as in portable communication equipment....

Ceramic Resonator Oscillator

July 2, 2004 5:23 am | Product Releases | Comments

ILSI's new ceramic resonator oscillator (CRO), series I1040, is an alternative to SAW oscillators for use in wireless applications. This tunable oscillator covers a frequency range of 600 to 6000 MHz in bands. The device offers improved phase-noise performance compared to SAW oscillators. The product comes in a SMD package, 0....

Multiline TVS Devices

July 2, 2004 5:23 am | Product Releases | Comments

ProTek introduces the MSMF and MSMFxxC series, a multilead TVS array in the SOT-553 and SOT-563 packages. This series protects multiple lines while using 1.7 ࡧ.7 mm of board space. The devices are suitable for use in portable electronics such as cellular phones and PDAs, as well as data channel applications....

Memory Modules

July 2, 2004 5:23 am | Product Releases | Comments

White Electronic Designs announces its 512MB DDR SDRAM memory module. This JEDEC standard device is suited for various high bandwidth, high performance memory system applications. White's W3EG7266S-D4 is a 64Mx72 Double Data Rate (DDR) SDRAM memory module based on 512 Mb DDR SDRAM components. The module consists of nine 64Mx8 DDR SDRAMs in 66 pin TSOP packages mounted on a 200 pin SO-DIMM....


July 2, 2004 5:23 am | Product Releases | Comments

STMicroelectronics announces the STLC2500, a single-chip product for handheld terminal applications that adds full Bluetooth v1.2 function and capability. The device includes a highly integrated radio, a base-band using the Ericsson Core Bluetooth Baseband Platform Q-E1, an ARM7 microprocessor core, RAM, ROM, and patch RAM, all on the same silicon die....


Fully Integrated Bluetooth Modules

July 2, 2004 5:23 am | Product Releases | Comments

SMART announces its line of fully integrated 90191 Bluetooth® modules, that can be integrated into new or existing product designs to provide Bluetooth functionality. This product family includes board-to-cable modules and board-to-board modules measuring 17.65 × 32.5 × 4.9 mm and 17....

Comb/Harmonic Generator Line

July 2, 2004 5:23 am | Product Releases | Comments

PSPL announces its comb generator product line. The first product introduced is the model 5660 comb generator with preamplifier. The device works with sine wave inputs ranging from 500 MHz to 3 GHz, producing usable harmonics to greater than 50 GHz. In addition to standard products, the company also offers custom comb generators to meet specific input frequency range, output power, harmonic frequency roll-off, and form factor requirements....


July 2, 2004 5:23 am | Wireless Design & Development | Product Releases | Comments

MMD Components introduces a line of compact PECL (positive emitter coupled logic) voltage controlled crystal oscillators (VCXOs) with frequency ranges up to 300 MHz utilizing inverted mesa and AT strip crystals. Package size for the MVIP series is 5 × 7 × 1.5 mm. The series is suitable in applications with extreme environmental conditions....

LO Architecture Technology

July 2, 2004 5:23 am | Product Releases | Comments

RFDomus announces its patent-pending Q-MAX™ technology. The technology is based on an innovative local oscillator (LO) architecture that enables an reduction in power consumption when compared to conventional LO implementations. Designed for simplifying the integration of the LO block with other radio blocks in advanced CMOS and SiGe processes, Q-MAX technology provides the flexibility needed for inclusion in complete single-chip RF tra...

Power Amp

July 2, 2004 5:23 am | Product Releases | Comments

Aethercomm's SSPA 8.5-9.6-30 is a solid state power amplifier that operates from 8.5 to 9.6 GHz. The P1dB at 25° C is 30 W typical. The saturated output power is 40 W typical at 25° C. Typical small signal gain is 44 dB. Noise figure is 4 dB typical at 25ºC. Input VSWR is 2.0:1 maximum. Output VSWR is 2....

LDMOS Amplifier

July 2, 2004 5:23 am | Product Releases | Comments

CEL introduces NEC's new LDMOS medium power amplifier. Housed in an 8-pin 2.0 × 2.2 mm package, the UPD5702TU features recessed leads and a 0.5 mm profile. With up to +23 dBm output power, it can serve as an output stage for low power transmitters or, in higher power applications, as a PA driver....

Card Kit

July 2, 2004 5:23 am | Product Releases | Comments

AVX announces its Compact Flash (C/F) Type II kit with standard plastic extensions. Designated the 9181 Series, the C/F card kit features a plastic frame, stainless steel covers, and a 50-position receptacle. Typical wireless applications for the C/F card kits include PDAs, pagers, and digital cameras....


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.