Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Soldering Iron

March 28, 2003 9:42 am | Product Releases | Comments

The Antex G/3U miniature soldering iron is designed with the heating element directly under the tip, for optimum comfort and thermal efficiency. Featuring a series of specialized slide-on tips that are gold plated for easy wetting, this precision miniature soldering iron complies with military electronic hand soldering specifications....

LCD Modules

March 28, 2003 9:42 am | Product Releases | Comments

The F-51553 series of 128 × 64 dot COG (chip-on-glass) monochrome STN transmissive LCD modules feature a 2.8 inches diagonal area that can display text and graphics together. The F-51553 modules provide a wide temperature range (– 20°C to +70°C). They also support serial as well as parallel interface....

Double Shielded Cable

March 28, 2003 9:42 am | Product Releases | Comments

The LA Series is a low loss double shielded cable that provides low attenuation and excellent phase stability and mechanical performance. It is ideal for applications up to 18 GHz requiring low loss performance and longer cable length interconnects, such as telecom and mil/aero. The LA Series uses silver plated inner and outer conductors for excellent attenuation performance....

Advertisement

Silver Filled Epoxy

March 28, 2003 9:42 am | Product Releases | Comments

TRA-DUCT 921M01 is a low viscosity, two-part, silver-filled epoxy that offers a long pot life and electrical conductivity. This soft, smooth paste is ideal for application via automatic dispenser, screen-printing, or hand probe at a relatively low heat cure. This material is packaged in BIPAX as well as in pre-mixed and frozen syringes....

Packaging Platform

March 28, 2003 9:42 am | Product Releases | Comments

Schroff introduces a system that is a complete, flexible packaging platform for intelligent telecom and LAN network interfaces. The CompactPCI 2.16 System incorporates backplane, power supply, cooling, and provision for monitoring into a single package that provides theoretical data transfer rates of up to 50 Gbit/sec....

Horn Antenna

March 28, 2003 9:42 am | Product Releases | Comments

This double-ridged guide horn antenna offers a frequency range of 1 - 18 GHz. The BHA 9118 is a linearly polarized, broadband antenna. The BHA 9118 can be used for both receiving (emissions) and transmitting (immunity) in chambers or open area test sites (OATS). It incorporates a precision "N" connector that provides good power handling capability and low voltage standing wave ratio (VSWR)....

Quad-Channel Transceiver

March 28, 2003 9:42 am | Product Releases | Comments

This quad-channel transceiver is designed to be used as a general purpose physical layer device (PHY) for proprietary backplanes or as a Fibre Channel or Gigabit Ethernet transceiver. As an alternate source, the FIN7216-01 offers a direct replacement while consuming less power. It offers a broad operating range (100 Mbps to 1....

Litepipe for LEDs

March 28, 2003 9:42 am | Product Releases | Comments

The LMS Series litepipe provides display panel moisture sealing and 180° of viewing angle. This lens and litepipe unit is designed to provide moisture sealing and dust control for display panels when the LED is attached to a circuit board. They are designed for use with surface mount LEDs as well as standard thru-hole LEDs, horizontally or vertically circuit board mounted....

Advertisement

D-SUB Connectors

March 28, 2003 9:42 am | Product Releases | Comments

Shogyo D-SUB connectors are available with conductors ranging from 9 - 37 pins; steel-tin-plated or zinc-plated shells; pin contacts of brass, high-retention phosphorous-bronze or gold-plated nickel; plastic or metal hoods; in right angle and vertical mount. Features include: current ratings from 1 - 5 amps with dielectric strength of 1,000 V for 1 minute; insulator resistance rated at 1,000 M Ohms minimum at 500 V DC; temperature resistanc...

Receiver Sensitivity

March 28, 2003 9:41 am | Product Releases | Comments

Too much of a good thing? By Jim O'Callaghan, AeroComm Some OEM radio manufacturers tout high receiver sensitivity as the miracle cure for increasing distance and reducing power consumption. They claim a receiver sensitivity of – 110 dB delivers up to 10 times the distance of an industry-average radio with a receiver sensitivity of – 93 dB — at no cost....

Introduction to Spread Spectrum Communications

March 28, 2003 9:41 am | Product Releases | Comments

The aspects involved in spread spectrum techniques. By Kuo-Chang Chan, Maxim Integrated Products Inc. What is meant by spread spectrum? Many electrical engineers ask that question (especially "non-RF" engineers), even though literature and books on the subject abound, and explanations can be found at various websites....

Electrical Performance of Microvia PCB Materials

March 28, 2003 9:41 am | Product Releases | Comments

Substrates based on FR4 core constructions utilizing low loss microvia dielectrics can offer low cost, high performance. By Dr. Gregg S. Wildes and John Mosko, W. L. Gore & Associates, Inc. High density module substrate and PCB requirements are driving the need for high density interconnect (HDI) design capabilities using laser microvias (note that "HDI", "high density", and "microvia" are often used synonym...

EMI Filter Array

March 28, 2003 9:39 am | Product Releases | Comments

The CSPEMl400 family of components provide EMI filtering and ESD protection for data ports in cell phones, PDAs, and notebook computers. The devices features: greater than 30 dB of attenuation at 1 GHz; ± 25 kV ESD protection using the MIL-STD-883 (Method 3015) specification; ± 10 kV ESD protection satisfying the maximum requirements of the IEC 61000-4-2 Level 4 international standard....

Tubular Bessel Filter

March 28, 2003 9:39 am | Product Releases | Comments

RLC Electronics offers 4th Order Tubular Bessel low pass filter with 3 dB cutoffs at up to 2X cutoff of the company's LB series. Computer design and tubular construction allow the filter to maintain excellent delay characteristics with reasonable rejection while extending the 3 dB cutoff and eliminating unwanted spurious response....

Low Pass Filter

March 28, 2003 9:39 am | Product Releases | Comments

The MAX7440/MAX7441/MAX7442 are 6-channel video reconstruction filters. They are ideal for anti-aliasing and digital-to-analog (DAC) reconstruction video applications. Each channel of the devices combine a continuous-time low pass filter with high frequency boost options and a unity-gain amplifier....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading