Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Front-End Power System

September 2, 2003 8:42 am | Product Releases | Comments

Unipower's 2400 watt front-end power system features three 800 watt, hot-swap power modules in a 1U high, 19 inch rack. The back panel has all input and output connections including separate AC inputs for each module, copper output bus bars and a 25-pin subminiature D connector for control signals....

Clips

September 2, 2003 8:42 am | Product Releases | Comments

Micro Plastics' molded double nail in clips are used to install cable, fiber optics, computer networks, and other communication systems. These clips are molded in black or white polyethylene, and supplied with nails already installed....

Cable Clamp

September 2, 2003 8:42 am | Product Releases | Comments

Micro Plastics announces the flat cable clamp. These flat adhesive backed cable clamps are made of gray colored PVC material, and used for routing flat cable while holding it firmly in place. Currently four sizes are available in lengths of .591 inches to 1.10 inches. All widths are .984 inches and all heights are ....

Advertisement

Shielded Inductors

September 2, 2003 8:42 am | Product Releases | Comments

Gowanda introduces a series of surface mount inductors — SMRF 5025S. Technical specifications include inductance from .10 to 10,000 microHenries and incremental current ratings from 3900 to 54 mAmps DC (based on a 35°C temperature rise at ambient temperature of 90°C). www.Gowanda....

Crimping Tools

September 2, 2003 8:42 am | Product Releases | Comments

JST introduce tow ergonomic crimping hand tools. The JUCS-2210 crimping hand tool for insulated terminals and splices and the WC-2210 hand tool for closed end splices are both ergonomically designed. The JUC-2210 die set has three crimping nests to terminate 22-16 (red), 16-14 (blue), and 12-10 (yellow) preinsulated terminals and butt splices....

Digital Fiber Sensor

September 2, 2003 8:42 am | Product Releases | Comments

By combining two amplifiers in one slim housing, Omron's E3X-MDA fiber sensor saves space. The unit's built-in AND/OR logic output eliminates the need for a separate PLC or sensor controller. The E3X-MDA comes equipped with a power tuning function that enables it to automatically adjust to the sensing condition....

Fiber Sensors

September 2, 2003 8:42 am | Product Releases | Comments

The E3X-DAS fiber optic sensor from Omron features a power tuning function, which enables the sensor to address a range of applications. With a push of a button, this sensor automatically shifts the power level to the optimum level to any sensing condition. This function also eliminates sensor variations that are inherent in any sensor....

Synthesizer Module

September 2, 2003 8:42 am | Product Releases | Comments

Novatech introduces the Model DDS8p, a frequency and phase agile signal generator that outputs Sine, Cosine and TTL signals simultaneously from 10 Hz to 120 MHz in 1 μHz steps. The fast parallel binary interface allows the frequency and phase to be switched in 600 ns. The DDS8p uses an internal ± 1 ppm temperature compensated crystal oscillator to run the DDS circuitry....

Advertisement

Wirewound Diplexers

September 2, 2003 8:42 am | Product Releases | Comments

TOKO announces the DIP1A Series of wirewound diplexers which contain an integrated coaxial F-connector and are designed for DOCSIS 2.0 broadband communication platforms. The R975ACITN-1029B has a low pass filter passband of 5 to 42 MHz and a high pass filter passband of 88 to 860 MHz. www.tokoam....

Power Entry Modules

September 2, 2003 8:42 am | Product Releases | Comments

Schurter introduces series DC11 and DC12 power entry modules. The unit combines an AC inlet, with optional EMC filter, and a rocker style switch recessed in the unit to prevent accidental actuation. The in-rush rating of the switch is 100 Amps for 3 to 4 milliseconds, 5 Amps continuous. Lifetime is rated for 50,000 cycles at 10 Amps/250 volts....

TCVCXOs

September 2, 2003 8:42 am | Product Releases | Comments

ILSI announces three series of high stability TCVCXOs. The 1711 and 1712 series is in the "Euro package", with the 1711 designed for TTL/HCMOS outputs and the 1712 for Sine Wave. The 1713 series output is TTL/HCMOS, and is in a 1.0 square inch package. The 1714 series output is TTL/HCMOS and is in a DIP package....

A Decade of Progress

September 2, 2003 8:40 am | Product Releases | Comments

Michael Civiello, Zyray Wireless I am honored to have the opportunity to write this 10th anniversary Upfront column. With nearly 20 years experience in the wireless industry, eight of them as an editorial advisory board member, I have had the privilege of watching and experiencing first hand the steady growth of what has become an excellent wireless monthly publication....

Connectors and Components Catalog

September 2, 2003 8:37 am | Product Releases | Comments

SV Microwave has published a catalog covering their offering of 2.92 mm connectors, adapters, terminations and attenuators. SVK precision connectors operate mode-free to 40 GHz (usable to 46 GHz). As compared to SMA, the SVK interface features reduced insertion forces. The 2.92mm connectors are mechanically compatible with 3....

MMIC Amplifier Application Note

September 2, 2003 8:37 am | Product Releases | Comments

Agilent Technologies announces an application note that details how to design an MMIC amplifier using Agilent's Advanced Design System (ADS) software. The 40-page document illustrates several common problems engineers face when designing, simulating and producing a physical layout of an MMIC circuit, as well as the validation steps needed to verify that the physical layout still produces the desired result....

Digital Catalog

September 2, 2003 8:37 am | Product Releases | Comments

AVX introduces a Digital Catalog System: Volume 7, containing the latest in Spice software packages as well as product and technical information on its broad selection of electronic components. The CD-ROM highlights information on AVX's products, including capacitors, capacitor arrays, filters, thin film devices, ferrites, timing devices, connectors, circuit protection devices and MIL-Spec parts....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading