Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

2.5 Watt Amplifier

February 2, 2004 8:06 am | Product Releases | Comments

Stealth Microwave introduces the SM3436-34HS, a 3.4 to 3.6 GHz amplifier designed to meet the needs of service providers working in the fixed wireless access market. The module provides a minimum P1dB of +34 dBm, a typical OIP3 of +48 dBm, linear gain of 34 dB with a ۪.5 dB flatness across the band, and VSWR In/Out of 1....

InGaP HBT Divider

February 2, 2004 8:06 am | Product Releases | Comments

Hittite announces a family of InGaP HBT MMIC prescalers which operate from DC (with a square wave input) to 18 GHz. The low additive SSB Phase Noise, -151 dBc/Hz at 100 kHz offset, make this family of dividers suited for commercial PLL applications such as VSAT, point to point radio, fiber optic, and test equipment markets, as well as military PLL systems....

Silicon-Based RF Capacitors

February 2, 2004 8:06 am | Product Releases | Comments

Vishay introduces silicon-based RF capacitors that boost electrical performance while reducing the board space. These products provide the same range of capacitance values as conventional capacitors while delivering better stability over a wide frequency range, high Q factors, low ESR values, and accurate dimensions....

Advertisement

Beamforming Network

February 2, 2004 8:06 am | Product Releases | Comments

TRM introduces a 1 × 4 beamforming network designed for use in military airborne radar environments. The octave band device offers low loss and moderate power handling capability in a compact housing. The beamformers are used to structure and direct the elements of an antenna array and are typically used within military sea, air and land based radar applications, as well as space based architectures....

High Linearity LNAs & PAs

February 2, 2004 8:06 am | Product Releases | Comments

Hittite announces three GaAs pHEMT Medium Power Amplifier die that complement their line of LNAs and PAs for the point to point, point to multipoint, VSAT, military and space markets. Each of these amplifiers feature fully matched (50 ) RF ports and a +5 V power supply, for implementation in Multi-Chip-Module and subsystem applications....

Technologies

February 2, 2004 8:06 am | Product Releases | Comments

Data I/O® and M-Systems have created a high-speed gang programming solution specifically for M-Systems memory products. The release of this configuration of FlashPAK is a four-socket programmer called FlashPAK-MSYS. M-Systems' DiskOnChip products are suited for applications such as mobile handsets, set-top boxes, Point of Sale and other embedded applications....

Inline Programmer Provides Support for Siemens' Placement Machines

February 2, 2004 8:06 am | Product Releases | Comments

Data I/O® announces ProLINE-RoadRunner™ support for Siemen's HS60 and C Class surmount technology electronics assembly machines. The programmer provides cost efficiency and quality to electronics manufacturing. The system removes blank devices from carrier tape, programs four devices in parallel and delivers them to the pick-up point of the placement machine, ensuring that all parts placed on board are programmed and verified....

Self-Adjusting Automated Matrix Tray Feeder

February 2, 2004 8:06 am | Product Releases | Comments

Data I/O® introduces the TF30 Automated Tray Feeder, a self-adjusting, automated handling solution for processing devices in and out of JEDEC and semiconductor-specific matrix trays during programming. The feeder accommodates a variety of sizes and variations of matrix trays. The TF30's BatchPlus™ process allows component replenishment to the TF30 tray feeder while the host machine continues to program and process components in and o...

Advertisement

Arrays

February 2, 2004 8:06 am | Product Releases | Comments

AVX introduces their TransFeed array in the 0612 (3.2 × 1.6mm) package. Designated the V3F4 series, the device pairs the electrical characteristics of AVX's TransGuard (MLV) and FeedThru filters to offer circuit protection and EMI reduction over a broad range of frequencies. The TransFeed product has faster "turn-on" time and enhanced attenuation characteristics over the standard multilayer device....

Cascadable SiGe Gain Block Amplifiers

February 2, 2004 8:06 am | Product Releases | Comments

Hittite announces the release of three plastic packaged SiGe MMIC Gain Block Amplifiers, the HMC476MP86, HMC479MP86, and HMC481MP86, which are suited for wireless infrastructure/handhelds, test equipment, microwave radio and military COTS applications from DC to 6 GHz. Across the product line small signal gain ranges from 15 to 20 dB at 1 GHz, and 13 to 18 dB at 2 GHz....

Mil-Spec Diplexer

February 2, 2004 8:06 am | Product Releases | Comments

...

High Frequency VCXO for Applications from 120 to 600 MHz

February 2, 2004 8:06 am | Product Releases | Comments

Fox has expanded its product line with the addition of the high frequency VCXO. The VCP Series is suited for high-end applications with frequency ranges within the 120 to 600 MHz range, including SONET, ATM/SDH, and other applications in the optical market. The series is available in an industry-standard 7....

LVDS Serializers and Deserializers

February 2, 2004 8:06 am | Product Releases | Comments

Fairchild announces the release of four LVDS serializers and deserializers. These devices solve EMI and cables size problems associated with wide, high-speed TTL interfaces that are commonly found in a range of communications, computing, industrial and automotive applications. Serializers (FIN1215, FIN1217) convert parallel LVTTL to serial LVDS, and the deserializers (FIN1216, FIN1218) convert serial LVDS back to parallel LVTTL....

Wireless Product Line from Hanwell Instruments

February 2, 2004 8:06 am | Product Releases | Comments

Transcat announces the availability of the full line of Hanwell Instruments, Ltd. WDAS. WDAS include all the components needed to sense, collect, transmit, receive, record, store and graph obtained data. Standard software is also included with all WDAS. Software compliant with the FDAs 21 CFR Part 11 regulation is also available....

Triac Driver Optocouplers

February 2, 2004 8:06 am | Product Releases | Comments

Fairchild expands its family of random-phase triac driver optocouplers with these nine products in four-pin, MFPs that provide designers flexibility and space-saving benefits in industrial and consumer applications. The triac drivers offer designers a choice of three peak blocking voltages (250, 400, or 600 V) and three trigger current options (5, 10, 15 mA) that can be tailored to specific application needs....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading