Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Cross-market Platform

November 24, 2003 7:19 am | Product Releases | Comments

Tyco Electronics Power Systems announces the Sentry 3000 cross-market compliant platform designed for distributed architectures and positioned to serve both data and telecom markets with a simple exchange of the power supply. The Sentry 3000 platform consists of the AC-3000 front-end rectifier, the DC-3000 power entry module (PEM), and the PS-300 power shelf....

Sine Wave Inverter

November 24, 2003 7:19 am | Product Releases | Comments

Unipower's INV5000-230 produces 230 VAC RMS at 22 amperes (5 kVA) in a 2RU-high shelf which mounts in a 12- or 23-inch rack. Both 50 and 60 Hz models are available and the input voltage range is 42 to 56 VDC. The INV5000-230 is fully isolated from the battery input. Input circuit breakers turn the inverter on and protect the battery from input faults....

Test Receiver

November 24, 2003 7:19 am | Product Releases | Comments

Berkeley introduces Yellowjacket Plus, an 802.11a Wi-Fi analysis tool with built-in GPS receiver. Yellowjacket Plus is an all-in-one, portable, wireless test receiver system with built-in spectrum analyzer that sweeps, analyzes, optimizes and secures 5 GHz Wi-Fi WISPs and Hotspots. The calibrated receiver measures all 8 OFDM 802....

Advertisement

Digital Receiver and A/D Converter

November 24, 2003 7:19 am | Product Releases | Comments

Echotek announces a 2-channel wideband digital receiver and A/D converter which provide sampling rates of 12 bits at 210 MHz using the AD9430. Model numbers for these boards are ECDR-2-12210-PMC and ECAD-2-12210-PMC. These boards operate in the clock frequency range from 40 MHz up to 210 MHz. The typical Spurious Free Dynamic Range (SFDR) is – 80 dBm with an analog input at – ....

Test Fixture Boards

November 24, 2003 7:19 am | Product Releases | Comments

Advanced Interconnections offers custom engineered, microchip socketed test fixture boards that electrically interface test equipment to ball grid array (BGA) packages. The test fixture boards are multilayer FR-4 assemblies incorporating cable-to-board connectors (which provide the interface to the test system) and AIC's True BGA Socket (into which the chip packages are inserted during testing)....

PCS Duplexer

November 24, 2003 7:19 am | Product Releases | Comments

This PCS Duplexer is designed to support the Asian Macro-Cell Telecom markets. The unit offers low passband insertion loss, excellent rejection and return loss parameters. The duplexer is designed and tested to meet the high power requirements for the transmit channel. Dimensions are 255 × 210 × 34 mm, excluding the mounting plate....

Sensor Chip

November 24, 2003 7:19 am | Product Releases | Comments

State of the Art, (SOTA), introduces a line of heater sensor chips utilizing platinum on alumina and oxidized silicon. These heater/sensors can be utilized in applications in areas from microelectronics to biomedical engineering. Potential applications include determination of thermal resistance of IC chips, variable optical attenuation of arrayed waveguide gratings, and thermal >management in miniature chambers(mini-cell arrays)....

Evaluation System

November 24, 2003 7:19 am | Product Releases | Comments

The MDEV-HP3-xxx wireless development system contains the tools to explore the capabilities of HP-3 series RF modules. The master development boards feature encoder/decoder Ics with audible and relay-switched outputs for range testing, an RS-232 or USB interface for protocol development, demonstration software and an on-board prototyping area with breakout headers and a regulated power supply....

Advertisement

Watch Crystal

November 24, 2003 7:19 am | Product Releases | Comments

Fox introduces a miniature watch crystal measuring 3.2 × 1.2 mm with a low profile of 0.95 mm. With a frequency of 32.768 kHz, the FSN surface mount device is optimized for a standard 12.5 pF load capacitance, with an optional 7 pF load capacitance available. Frequency tolerance at 25°C is – 20 to +20 ppm and frequency stability is – 0....

Test Socket

November 24, 2003 7:19 am | Product Releases | Comments

Aries introduces a high frequency test socket for devices from 14 to 27 mm 2 wide. The socket is suited for manual testing of devices with pitches down to 0.50 mm, in applications with speeds from 1 GHz to over 10 GHz. A 4-point spring probe crown on the socket ensures scrub on solder ball oxides for reliable contact mating....

BGA Reed Relays

November 24, 2003 7:19 am | Product Releases | Comments

Coto announces two ball grid array (BGA) reed relays. The B10 is a single channel Form A BGA that measure 0.1 sq. in. The B10 has 3.3 V or 5 V coils standard and the RF insertion loss (– 3 dB roll-off point) is > 10 GHz. The B40 is a BGA with four independent Form A channels in one quad package measuring 0....

InGaAs Photodiodes

November 24, 2003 7:19 am | Product Releases | Comments

OSI Fibercomm introduces 155 Mbps/622 Mbps InGaAs photo diodes with TIAs. The FCI-InGaAs-xxx series has active area sizes of 55 μm, 70 μm, and 120 μm. These sensors offer low noise with a spectral range of 900 nm to 1700 nm. The photodiodes exhibit high responsivity from 1100 nm to 1620 nm....

Cables for Test and Measurement

November 24, 2003 7:19 am | Product Releases | Comments

Semflex introduces the RH cable series. Designed for cable assemblies that support test and measurement instruments, this cable delivers improved phase stability versus flexure and temperature. Low attenuation is achieved through use of silver plated inner and outer conductors, and low density microporous PTFE dielectrics and FEP jackets provide consistent performance over wide temperature extremes....

Darlington Optocouplers

November 24, 2003 7:19 am | Product Releases | Comments

Fiarchild announces five products in both single-dual channel configurations offering 3.3 V or 5 V operation voltages for low power consumption. The dual-channel HCPL0730, HCPL0731 optocouplers offer 5 V operation and SOIC-8 packaging. The single-channel FOD070L, FOD270L and dual channel FOD073L devices offer 3....

DC/DC Control ICs

November 24, 2003 7:19 am | Product Releases | Comments

Micrel announces a family of four complementary output DC/DC push-pull control ICs. The MIC3838 and MIC3839 are flexible push-pull control ICs housed in a MSOP-10 package. The MIC3838/39 can be configured for either voltage-mode or current-mode control. The MIC3808 and MIC3809 are 8-pin current mode push-pull control ICs....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading