Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Demonstration Kit

November 24, 2003 7:19 am | Product Releases | Comments

Honeywell introduces a radio transceiver demonstration kit. The kit includes the Radio On A Chip transceiver, ROC093XC, and the necessary components and design guidelines needed to make software and system development easy. This single chip radio transceiver delivers a typical Rx sensitivity of – 95 dBm at data rates up to 128 kb/s in the 915 MHz band....

DC Blocks

November 24, 2003 7:19 am | Product Releases | Comments

Microlab/FXR announces an improvement to the design of its DC Block with 7-16 mm DIN connectors. It now features 500 W power capability and maintains low loss (< 0.08 dB) over the frequency band 800 to 2,700 MHz. The HR-D36 DC Block is used to prevent the flow of direct current and low frequency current surges along the inner conductor of a transmission line, while permitting the unimpeded flow of RF signals....

Diodes

November 24, 2003 7:19 am | Product Releases | Comments

Vishay announces 120 diode devices in the SMF (DO219-AB) package, which measures 3.7 × 1.8 × 0.98. With a package height of 0.98 mm, the SMF (DO219-AB) package reduces space requirements and improves circuit board density. Vishay Semiconductors diode products include switching, fast switching, ultrafast switching, Schottky, ESD protection, and Zener diodes....

Advertisement

Lead Fuses

November 24, 2003 7:19 am | Product Releases | Comments

Littelfuse announces a line of 3.6 × 10 mm fuses. The 600 series fuses have a voltage rating of 250 V. The line includes two ceramic models designed to the IECF 60127-3 standard: the 676 fuse with a current rating of 0.05 A to 6.3 A and the 677 time delay fuse, with a current rating of 0.25 A to 6....

Power Choke

November 24, 2003 7:19 am | Product Releases | Comments

API Delevan announces the Series FW1405 surface mount power choke, a high current inductor that utilizes rectangular copper wire edge-wound on a thermo-set epoxy bobbin base. The base features an integral three terminal design for part adhesion when soldered to a PCB, and co-planarity is achieved due the inductor being soldered to the terminals....

Amplifier ICs

November 24, 2003 7:19 am | Product Releases | Comments

NEC's UPC3221GV delivers 60 dB of gain, 50 dB of AGC range, low noise and low distortion over the AGC range in a miniature 8-pin SSOP package. The uPC3221GV is suited for any 10-100 MHz IF AGC. These 5 volt AGC amplifier ICs are fabricated using NEC's 10 GHz f T NESAT II AL silicon bipolar process....

Coaxial Terminations

November 24, 2003 7:19 am | Product Releases | Comments

Microlab/FXR announces a line of low cost, low power terminations. The TA-2 line of coaxial terminations has been designed for where a quality low power termination is required. The resistive film terminating element, contained in a matched coaxial housing, provides a 1.15:1 or better VSWR across the wireless bands from DC to 2....

Generators

November 24, 2003 7:19 am | Product Releases | Comments

Noise Com announces the GPS7500 Noise and Interference Generator, which provides a platform for testing susceptibility to interference of GPS receivers used in airborne, automotive, defense, mobile location and E911 applications. The GPS7500 Noise and Interference Generator is equipped with one or optionally two independent arbitrary waveform generators capable of 40 MHz bandwidth for interference generation over the L1 and L2 or L5 bands....

Advertisement

Power Amp for Wi-Fi

November 24, 2003 7:19 am | Product Releases | Comments

SiGe Semiconductor announces a power amplifier compliant to the 802.11b and 802.11g specifications. The RangeCharger SE2525L delivers power output of +19 dBm while achieving an Error Vector Magnitude (EVM) of 3% operating in 802.11g mode. In 802.11b mode, the SE2525L meets all Adjacent Channel Power Ratio (ACPR) requirements at +23dBm output power....

Vector Signal Generators

November 24, 2003 7:19 am | Product Releases | Comments

The R&S SM300 is a vector signal generator that covers 9 kHz to 3 GHz. The instrument covers frequency bands including WLAN, Bluetooth and EMC measurements. The instrument is able to generate digital signals as are required for mobile radio. The signal generator provides frequency and level sweep, a wide variety of analog modulation modes and high spectral purity....

TCXOs

November 24, 2003 7:19 am | Product Releases | Comments

Connor-Winfield's T501 is a 5 × 7 mm surface mount, temperature compensated crystal oscillator (TCXO). Operating at 3.3 VDC, the T501 has a temperature stability of ± 0.28 ppm, and will maintain an overall ± 4.6 ppm frequency tolerance over 20 years. Features of the oscillator include: low jitter < 1 pS RMS; temperature range: 0°C to 70°C; Tri-state enable / disable; surface mount package; tape and reel packaging; and ...

Thin Film Resistors

November 24, 2003 7:19 am | Product Releases | Comments

TT electronics IRC Advanced Film Division has introduced the COTS (commercial off-the-shelf) family of its TaNFilm and TaNSil thin film resistors. Using the same manufacturing equipment and materials as the military qualified thin film resistors, IRC's COTS-level products ensure long life stability in military and aerospace applications....

Calibration Module

November 24, 2003 7:19 am | Product Releases | Comments

Anritsu introduces the MN4765A optical to electrical (O/E) calibration module that transforms its Lightning 37200C/37300C vector network analyzers (VNAs) into lightwave component analyzers. A characterized, unamplified photodiode module, the MN4765A acts as an optical receiver when used with the 37200C/37300C series VNAs, which have frequency coverage up to 65 GHz....

Power Clip

November 24, 2003 7:19 am | Product Releases | Comments

Anderson Power Products introduces the Power Clip, an addition to its family of electrical power connectors. Designed as an interconnection between two perpendicular power bus bars, the Power Clip is used in "N+1" rectifier, power supply and switching power supply applications. Because the clip accepts a solid ....

Splice Kits

November 24, 2003 7:19 am | Product Releases | Comments

FCI-BURNDY introduces the HYREDUCER (YSR-TC) in-line reducing splice kits, and HYSLPICE (YS-TC) butt splice kits. The kits were developed to provide wire management solutions when splicing or reducing conductors with irreversible compression connectors. The HYREDUCER and HYSPLICE kits are pre-packaged with a connector, a length of heavy-duty heat shrink tubing, and an installation instruction sheet....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading