Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Analog-to-Digital Converters

September 2, 2003 8:42 am | Product Releases | Comments

Maxim introduces the MAX1226-MAX1231 and MAX1026-MAX1031 families of 12- and 10-bit analog-to-digital converters (ADCs) with 8, 12, or 16 single-ended analog inputs or 4, 6, or 8 true-differential analog inputs. These devices minimize microprocessor I/O requirements by including an on-chip FIFO, scan mode, internal clock mode, and internal averaging....

SPDT Switches

September 2, 2003 8:42 am | Product Releases | Comments

Hittite introduces two GaAs MESFET SPDT switches in a low cost plastic surface mount plastic packages designed for CATV and cellular applications demanding high isolation. The HMC348LP3 covers DC to 2.5 GHz and offers integrated 75 Ohm terminations, an "all off" state, > 80 dB isolation at 5 MHz and > 55 dB isolation up to 1 GHz....

Silicone Foam Gaskets

September 2, 2003 8:42 am | Product Releases | Comments

Stockwell Rubber Company announces silicone foam gaskets and cushioning pads supplied in custom die cut, water jet cut and slit-to-width configurations. Silicone Rubber generally provides resilience, high temperature stability and inertness unavailable in any other elastomer. Silicone Foams are produced from new liquid silicone rubber technology, and many grades are flame retardant meeting UL94V0 and UL94HF-1....

Advertisement

Battery Charger

September 2, 2003 8:42 am | Product Releases | Comments

Linear Technology introduces the LTC4002, a standalone switch-mode Li-Ion battery charger with an operating supply as high as 24 V. Low 4.7V input supply and low dropout operation of the IC guarantees continuous charging of 4.2 V Li-Ion batteries from 5 V wall adapters. For safety and autonomous charge control, the LTC4002 includes features such as automatic shutdown, battery preconditioning, battery temperature sensing, end-of-charge indic...

TOPICS:

SMT Lamps

September 2, 2003 8:42 am | Product Releases | Comments

JKL Components introduces a line of reflectorized surface mount incandescent T-2.4 lamp assemblies that produce high intensity illumination for applications where highly directional LED lighting is unacceptable. The reflectorized lamps are available in a full range of brightness levels, operating on 5 V at 115 mA....

Gate Drive Transformers

September 2, 2003 8:42 am | Product Releases | Comments

Designed to support high speed DC/DC converters in switching power supply applications, the SM76760, SM76922, SM76924 and SM76925 gate drive transformers operate at speeds of up to 22.2 Vusec, feature a hi-pot rating of up to 1500 VDC and come in a miniature low profile surface mount packages. Turns ratios available, depending on model configuration, are: 2:1:1, 1:1....

Amplifiers

September 2, 2003 8:42 am | Product Releases | Comments

Nanomotion introduces the AB5 amplifier to support all of its precision servo motors. The AB5 linearizes the voltage to velocity profile at the amplifier level, and eliminates the need for custom servo algorithms. The AB5 amplifier has added functionality by allowing the user to "turn off" (or turn on) the motor static holding force....

Switchmode Transformer

September 2, 2003 8:42 am | Product Releases | Comments

Prem introduces a printed circuit mount transformer for AC to DC converter applications. The SPP-3001 is designed for use in conjunction with the TNY255 TinySwitch integrated off-line switching power supply chip. Applications possible include those requiring input of 85 to 265 VAC and 2 DC outputs ranging from 6 VDC up to 12 VDC, or 1 DC output ranging from 12 VDC to 24 VDC at a maximum power of 5....

Advertisement

Anti-Reflective Films

September 2, 2003 8:42 am | Product Releases | Comments

Donatech announces anti-reflective films to improve contrast ratio and readability of electronic displays. The VARGard™ series of optical enhancement films provide specular anti-reflective properties to reduce front surface glare and improve light transmission. The films are available with several different surface finishes ranging from a matte 30 gloss to a clear 92 gloss finish....

Modem-on-Chip

September 2, 2003 8:42 am | Product Releases | Comments

Infineon introduces the VDSL5100i, a highly integrated Modem-on-Chip (MoC) solution the VDSL5100i provides an aggregate data rate of more than 100 Mbps, including asymmetric data rates of 70/40 Mbps and symmetric data rates of 50/50 Mbps over single-pair copper wires. The VDSL5100i supports both native Ethernet as well as ATM traffic and provides flexible band allocation and PSD shaping over all VDSL frequencies....

Power Switch

September 2, 2003 8:42 am | Product Releases | Comments

Fairchild announces the FDC6901L power switch that integrates an advanced Trench technology P-Channel MOSFET with a slew rate controller IC. The solution is able to handle loads as high as 3 A. with three programmable slew rates (600 V/ms, 41 V/ms, and 24 V/ms), the FDC6901L can be programmed to drive a range of capacitive loads....

Front-End Power System

September 2, 2003 8:42 am | Product Releases | Comments

Unipower's 2400 watt front-end power system features three 800 watt, hot-swap power modules in a 1U high, 19 inch rack. The back panel has all input and output connections including separate AC inputs for each module, copper output bus bars and a 25-pin subminiature D connector for control signals....

Clips

September 2, 2003 8:42 am | Product Releases | Comments

Micro Plastics' molded double nail in clips are used to install cable, fiber optics, computer networks, and other communication systems. These clips are molded in black or white polyethylene, and supplied with nails already installed....

Cable Clamp

September 2, 2003 8:42 am | Product Releases | Comments

Micro Plastics announces the flat cable clamp. These flat adhesive backed cable clamps are made of gray colored PVC material, and used for routing flat cable while holding it firmly in place. Currently four sizes are available in lengths of .591 inches to 1.10 inches. All widths are .984 inches and all heights are ....

Shielded Inductors

September 2, 2003 8:42 am | Product Releases | Comments

Gowanda introduces a series of surface mount inductors — SMRF 5025S. Technical specifications include inductance from .10 to 10,000 microHenries and incremental current ratings from 3900 to 54 mAmps DC (based on a 35°C temperature rise at ambient temperature of 90°C). www.Gowanda....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading