Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Electromechanical Switches

October 28, 2003 10:16 am | Product Releases | Comments

Dow-Key introduces a family of VXI switches with SMA connectors offering three configurations: SP6T, Double SPDT, and a transfer switch. DC characteristics include 20 to 28 VDC (24 VDC nominal) operation voltage. Equipped with a failsafe actuator, these devices switch in 20 ms maximum. All three switches have the same control connector, but each model has its own pin-out that plugs into the universal control circuitry....

LED Encapsulants

October 28, 2003 10:16 am | Product Releases | Comments

Dymax introduces four acrylate encapsulating resins, designed for brighter chip-on-board LED assemblies. When cured with a Dymax 2000-EC moderate intensity flood curing system, Light-Cap 9614, 9615, 9616 and 9617 offer optical transmission during the life of the assembly. Their resistance to elevated operating temperatures results in reduced yellowing over the life of the LED....

Programmable Frequency Synthesizer

October 28, 2003 10:16 am | Product Releases | Comments

ILSI's programmable synthesizer, part # PPLL_1A and 1B cover a frequency range from 20.0 MHz to 6000 MHz in bands with a reference frequency of 5.0 MHz to 50.0 MHz. Phase noise is < 110 dBC/Hz at 100 kHz offset. Buffered output level is +6 dBm @ 50 Ω. Supply voltage options include 3.3, 5....

Advertisement

Signal Management Products

October 28, 2003 10:16 am | Product Releases | Comments

T2, a division of TERK Technologies, introduces a line of maximum bandwidth signal management products. The line consists of installation hardware including splitters, diplexers, power high-definition multiswitches, low noise amplifiers, and agile modulators. The products are ergonomically designed....

Signal Generators

October 28, 2003 10:16 am | Product Releases | Comments

Novatech introduces model 2910B/RACK, a four channel DDS signal generator in a 1U rack mount instrument case. The 2910B/RACK outputs four programmable frequencies that can be independently set to any value between 100 Hz and 300 MHz with a resolution of 1 μHz. Each frequency is provided on two buffered output connectors, for a total of eight outputs, which are factory configured as +13 dBm sinewaves, TTL clock signals or differential cl...

Wire Connector

October 28, 2003 10:16 am | Product Releases | Comments

...

Multipin Headers

October 28, 2003 10:16 am | Product Releases | Comments

Thunderline Multipins come in a variety of styles from 2 pin to up 16 or more pins. They are built for both RF and DC applications up to 40 GHz and are available with combined RF and DC functionality in the same header. Thunderline-Z utilizes SolderTight construction to add a filtering capacitor which allows for a soldering schedule exceeding 300°C....

Light Pipe Materials

October 28, 2003 10:16 am | Product Releases | Comments

BivarOpto introduces an optional, high-contrast material for their light pipe products family. Featuring the use of a 94V-O compliant polycarbonate compound from GE, the light pipes are white-defused in off-state appearance and take full color when in the on-state. The materials are available for the SLP, SP, VLPR and PLP series light pipes and the lens caps in the line of FLP series products....

Advertisement

RF Coaxial Connector Clamp

October 28, 2003 10:16 am | Product Releases | Comments

TRU's SR-Series clamp attachment features a rolling clamp nut design that provides axial and rotational suppoer. This clamp attachment prevents distortion of the cable. Suitable for cables from 14 inches to 3/4 inches O.D., the SR-Series is compatible with RG214, RG393, and RG217 connectors and is suitable in applications where the connector is larger than the cable....

Testing Technology

October 28, 2003 10:16 am | Product Releases | Comments

ASSET introduces TopCAT (Topology and Cluster Analysis Technology). TopCAT analyzes the chematic of a Printed circuit board to identigy all of the non-boundary can devices that are connected to boundary scan devices. TopCAT automatically matches the names of the non-boundary scan devices in the design's netlist with device models archived on ASSET's web site or stored in a model library of the user....

Thermally Conductive Adhesives

October 28, 2003 10:16 am | Product Releases | Comments

Dymax introduces the line of Multi-Cure thermally conductive adhesives. These materials are suitable for bonding heat sinks or heat sensitive components to printed circuit boards. The UV curing option for fillets and encapsulants provides curing in 10 seconds or less at room temperature. Room temperature activator cure of adhesive between two surfaces provides fixturing in 30 to 45 seconds....

WiMax Raises the Wi-Fi Bar

October 28, 2003 10:03 am | Product Releases | Comments

Ern Worthman, Technology and Editorial Director Just when you thought it was safe to dip your laptop in the Wi-Fi waters, along comes the next iteration of not quite so short-range, unlicensed 802.xx wireless interconnect. We've been hearing about 802.16 for a while now, but the last few months have seen this technology push to the forefront, in terms of product promotion, with promises of commercially available product early in 2...

SMT Amplifiers and Mixers

October 28, 2003 10:02 am | Product Releases | Comments

Hittite Microwave offers two SMT packaged millimeterwave ICs designed for point-to-point and VSAT radio applications. The HMC442LM1 is a broadband 17.5 to 24 GHz GaAs PHEMT MMIC Medium Power Amplifier (MPA) that provides 14 dB of gain and +23 dBm of saturated power at 27% PAE from a +5.0 supply....

LDMOS FET

October 28, 2003 10:02 am | Product Releases | Comments

California Eastern Labs announces discrete silicon LDMOS FET to its family of NEC medium power devices. Developed primarily for 460 and 900 MHz applications, the NE5511279A is a suitable power amplifier for UHF band two-way radios, cellular repeaters, Fixed Wireless Access, and other short range wireless transmitter applications....

Gas Gauge

October 28, 2003 10:02 am | Product Releases | Comments

Linear Technology introduces the LTC4150, a bi-directional Coulomb counter designed to measure battery capacity in handheld PC and portable product applications. The device monitors the current through a small sense resistor between the battery and its load or charger circuit. The LTC4150 indicates the charge and discharge of the battery through a series of output pulses over a single communication pin that can be counted by a microcontroll...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading