Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Stacked Capacitors

September 27, 2002 6:44 am | Product Releases | Comments

Designed for high-current, high-power and high-temperature applications, these stacked capacitors have very low ESR (Equivalent Series Resistance) and ESL (Equivalent Series Inductance). SMPS Series capacitors offer design and component engineers a technology specifically designed for programs requiring high reliability performance in harsh environments....

Wireless Ethernet Bridges

September 27, 2002 6:44 am | Product Releases | Comments

The newest SEM components, SEM5811 and SEM5811X, operate in the unlicensed 5.8 GHz band, avoiding any interference issues in the 2.4 GHz or 900MHz band due to other license-free devices. Operating in the license-free 5.8 GHz band, the SEM5811 features an over-the-air data rate of up to 1.23 Mbps and operates over an industrial temperature range....

Switching Regulators

September 27, 2002 6:44 am | Product Releases | Comments

The SR5 series is a constant frequency, current mode, step-up converter that features excellent line and load regulation. It is suited for battery-operated systems as its power consumption in standby mode is 300 μA. The SR5 allows any input voltage from 5 Vin down to 2.2 Vin. Four standard output models are offered in 5, 9, 12, and 15 V; custom designs are also available via ± 10% output adjustments....

Advertisement

Adapter Set

September 27, 2002 6:44 am | Product Releases | Comments

The MDC02171 SMA Phase Equal Adapter Set consists of 3 SMA in-series adapters that have the same insertion electrical lengths. This allows them to be readily interchanged in test and measurement setups without significantly degrading system calibration. The kit includes a male to female adapter (MDC02171-1), a male to male adapter (MDC02171-2), and a female to female adapter (MDC02171-3)....

Digital to Analog Converter

September 27, 2002 6:44 am | Product Releases | Comments

The 8408 is a monolithic, quad 8-bit multiplying DAC CMOS converter with four separate DACs, each with its own reference input and on-board data latches. Data loading into the 8408 is similar to the write cycle utilized in RAM. Common TTL/CMOS inputs, coupled with compatibility with most 8-bit microprocessors such as 6800, 8080, 8085, and Z80, makes the device ideal for both audio decoding and process control....

Terminated Diplexer

September 27, 2002 6:44 am | Product Releases | Comments

K&L Microwave p/n 3KCZ70-80/X3170 offers 14 dB input return loss over the passband 80 MHz to 870 MHz and the rejection band of 1165 MHz to 3170 MHz. Insertion loss is less then 0.5 dB from 80 MHz to 870 MHz. Rejection is 30 dB minimum at 1165 MHz to 1950 MHz, 25 dB minimum at 1950 MHz to 6000 MHz and 15 dB minimum at 6000 - 9725 MHz....

Delay Filter Assembly

September 27, 2002 6:44 am | Product Releases | Comments

Lorch Microwave introduces their primary loop delay filter assembly. The units are available for all commercial communication frequencies and are integrated with couplers and isolators in a single package to minimize space and cost. The custom designed units are tailored to meet customer specific requirements....

Hybrid Amplifiers

September 27, 2002 6:44 am | Product Releases | Comments

The QBH-2001 and QBH-2003 LNAs are complete amplifiers ready to plug-and-play saving time and money. With their metal cover, they are suitable to minimize or eliminate the need for isolation covers on boards. QBH-2001, PCS & Broadband coverage, .9 dB NF, and +34 dBm OIP3. QBH-2003, Cellular band, 1....

Advertisement

IP Cores Bundle

September 27, 2002 6:44 am | Product Releases | Comments

The Comm Core Bundle includes five related communication IP Cores written in the VHDL programming language that were available previously as individual products. The bundle includes encrypted netlists of the following IP Cores: complex multiplier/mixer; numerically controlled oscillator; linear feedback shift register (PN Generator); binary pattern correlator; early/late gate symbol synchronizer....

Probing Solution

September 27, 2002 6:44 am | Product Releases | Comments

Cascade Microtech's S300 Semiautomatic Probing Solution for 300 mm wafers, combined with Agilent's 4294A, provides unmatched productivity and accuracy for advanced CV analysis of deep submicron semiconductors to 110 MHz. Key system features include: off-wafer, thermally isolated, SOL calibration standards, off-wafer system reference capacitors, and high-frequency probes and accessories....

Audio Processor IC

September 27, 2002 6:44 am | Product Releases | Comments

The CMX882 operates from a single 2.7 volt rail. Under the control of the host μC, all audio requirements are catered for: Voiceband and sub-audio filtering, Pre/de-emphasis, compression and expansion, audio routing and global level setting with single or two-point modulation available in the transmit path....

MEMS Packaging Automated

September 27, 2002 6:44 am | Product Releases | Comments

The 3500-II component assembly cell for MEMS packaging applications provides five micron accuracy placement in the X, Y, and Z axes, and .2 milliradians in Theta axis. It eliminates the need for human touch or handling of the devices. Presentation of the components for assembly is done in waffle paks or gel paks....

Planar MOSFETs

September 27, 2002 6:44 am | Product Releases | Comments

Fairchild introduces seven high voltage, planar MOSFETs offering low on-resistance, low gate charge and high energy density in avalanche and commutation modes. They are designed to meet the performance requirements of advanced switch-mode power supplies (SMPS) and DC/DC converters. The 500 V devices are aimed at SMPS and power factor correction applications, and four 200 V parts are for DC/DC converter applications....

Double-Coated Adhesives

September 27, 2002 6:44 am | Product Releases | Comments

The MACbond® family of double-coated adhesives demonstrates high tack and is ideal for gasketing, dust sealing and noise dampening applications. The IB-2120 is an acrylic and rubber tape for high-performance applications. The first adhesive side (acrylic) is applied to the printed nameplate. The second side (rubber), which features an aggressive adhesive, is used to bond to the low energy substrate....

Chip Capacitors

September 27, 2002 6:44 am | Product Releases | Comments

The PXA series low profile, vertical mount capacitors are available in a 6.3 × 5.2 mm case size. Electrically, the series has a capacitance range of 10 to 1,000 μF and a voltage range of 2.5 to 25 V DC. Leakage current is 0.2 CV maximum after two minutes at +20°C. Operating temperature range is – 55°C to +105°C....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading