The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

WiFi/WiMAX Splitters

June 20, 2007 9:11 am | Product Releases | Comments

MECA offers RoHS compliant, WiFi / WiMAX splitters for high performance, broadband LANs and mobile applications at 2.4 GHz and 5.8 GHz, and also public safety networks operating in the licensed 4.9 GHz band. Available in 2-way and 3-way SMA or N-Female connector configurations, these splitters feature low loss (0....

Classic Design Software

June 20, 2007 9:11 am | Product Releases | Comments

Lattice Semiconductor Corporation releases its ispLEVER® Classic design software. The ispLEVER Classic design software is based on the complete ispLEVER software design tool suite, a comprehensive design environment for all Lattice programmable logic products. It includes a powerful set of software tools for all design tasks, including project management, HDL design entry, module/IP integration, place and route, timing analysis, in-syste...

Manufacturing Test Software

June 20, 2007 9:11 am | Product Releases | Comments

LitePoint Corporation announces the availability of the LitePoint IQfact™ manufacturing test software for products based on Sequans WiMAX chipsets. The turnkey software package runs on IQmax™𤯤 R&D and IQmax-100 WiMAX manufacturing one-box test solutions. Wireless product manufacturers can get the same fast test times and good test coverage for WiMAX that they've already been getting by using LitePoint's other IQfact products ...


Miniature VCO

June 20, 2007 9:11 am | Product Releases | Comments

Z-Communications, Inc. announces the introduction of their sub miniature VCO (SMV4710A-LF) with low phase noise performance. SMV4710A-LF in frequency range of 4538 to 4903 MHz is designed to meet the high performance requirements of microwave radio applications. This module offers low phase noise performance of 㫫 dBc/Hz at 10 kHz....

Coplaner Attenuators

June 20, 2007 9:11 am | Product Releases | Comments

State of the Art (SOTA), Inc. announces an addition of coplaner attenuators to its high frequency product line. Wire bondable or solderable 0303" (.030" 3 .030" 3 .010") coplaner balanced T attenuators are available on alumina or aluminum nitride (high power) substrates. Constructed using a high stability thin film resistor element, these devices are available with attenuation values from 1 to 20 dB....

Thermal Simulation Process

June 20, 2007 9:11 am | Product Releases | Comments

Hybricon, Inc. introduces a thermal simulation process that cools an ATR form-factor chassis that dissipates almost 200 W and operates at altitudes up to 50,000 feet. The process evaluates a range of possible design configurations, focusing on heat sink design and fan performance at high altitudes....

Die and SMT Power Amplifiers

June 20, 2007 9:11 am | Product Releases | Comments

Hittite Microwave Corporation introduces five GaAs PHEMT 1 W and 2 W MMIC power amplifiers that are suitable for point-to-point and point-to-multi-point radios, test instrumentation, military and space applications from 6 to 13 GHz. Optimized for high gain and high output power, the HMC590 and HMC590LP5(E) are high dynamic range GaAs PHEMT MMIC 1 W power amplifiers, which operate from 6 to 9....

Coaxial Mismatch Termination Sets

June 20, 2007 9:11 am | Product Releases | Comments

Link Microtek introduces a series of coaxial mismatch terminations that provide an easy method of calibrating equipment or checking the performance of a microwave system. Supplied in boxed sets of five, the terminations offer standard VSWR values of 1.2, 1.5, 2, 5 and 10 to 1, and they can be specified with N-type or SMA connectors and frequency ranges of either 1 to 5 GHz or 1 to 18 GHz....


Two High Power Terminations

June 20, 2007 9:11 am | Product Releases | Comments

Microlab/FXR announces the addition of two high power terminations to its Money Saver Product Line. The TB-70 (50 W) and the TB-75 (100 W) are both available with either N or 7 to 16 mm DIN, male or female connectors. Units have been designed using solder-free mechanically stable connections and achieve a typical VSWR better than 1....

Active Doubler

June 20, 2007 9:11 am | Product Releases | Comments

Mimix Broadband, Inc. introduces a 2.5 to 6.0 / 5.0 to 12.0 GHz InGaP HBT active doubler offered in a 4 × 4 mm QFN surface mount plastic package that is RoHS compliant. Identified as the XX1002-QH, this device delivers +17 dBm output power, has good fundamental rejection of 35 dBc and offers the added feature of a single bias supply....

SERDES Interfaces in an FPGA World: What Do I Need To Know to Get Started?

June 20, 2007 8:46 am | Product Releases | Comments

By understanding the abilities of both FPGA products and SERDES interfaces, a design team can increase the reliability and functionality of its products while reducing time to market. By Dan Sides & Bertrand Leigh, Lattice Semiconductor For some years now, increasing levels of chip functionality and data throughput requirements have propelled the chip industry in a migration from lower data rate click t...

Software Radio in Wireless Applications: A Revolution through Software

June 20, 2007 7:26 am | Product Releases | Comments

By Marty Gilbert, Vanu, Inc. The intent of software radio is to separate the wireless standard from the hardware platform by developing wireless technology standards. Wireless communications infrastructure manufacturers have traditionally developed single-standard, high-power, high-capacity networks to address the need for cellular coverage over large areas....

FPD Taiwan

June 20, 2007 6:33 am | Product Releases | Comments


Tuned Oscillators

June 19, 2007 12:38 pm | Product Releases | Comments

Micro Lambda Wireless, Inc. announces the production release of YIG-Tuned oscillators covering the 2 to 18 GHz and 2 to 20 GHz frequency bands. Four fundamental frequency models providing desirable phase noise performance are now available. The fundamental frequency units are available in two standard package configurations 1....

Mobile Media

June 19, 2007 12:38 pm | Product Releases | Comments

IDT™ introduces the Mobile Multimedia Interconnect™ (M2I), fully-optimized for multimedia applications in high-end mobile handsets and personal digital assistant devices. The M2I performs up to six times faster with 90% less battery drain. High-end handset users can reliably playback multimedia of high quality with minimal impact to their "talk time" and battery life....


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.