Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

2 W Power Amplifier

March 13, 2007 12:50 pm | Product Releases | Comments

M/A-COM, a business unit of Tyco Electronics, announces the MAAP-007649-000100, a 2W power amplifier for the 800 to 1000 MHz frequency band. Its design displays optimum performance for RFID reader applications with greater than 1 W DRM (Dense Reader Mode) spectral mask linearity and a flat gain response....

Multi-Band Frequency Synthesizer

March 13, 2007 12:50 pm | Product Releases | Comments

EM Research introduces its MBS-500 Multi-Band Frequency Synthesizer which is a wideband frequency source designed for use in RF test and measurement applications. Covering the frequency range of 100 to 500 MHz in a single unit, this synthesizer features step size of 100 KHz, output power of +14 dBm and phase noise of less than 㫷 dBc/Hz at 10 KHz offset....

Microwave Frequency Counter/Analyzers

March 13, 2007 12:50 pm | Wireless Design & Development | Product Releases | Comments

Pendulum Instruments announces its CNT-90XL family of Microwave Frequency Counter/Analyzers with integrated power meters, covering up to 60 GHz of frequency range. It is a CW counter with burst capabilities, offering high resolution and measurement speed. The measurement speed for power and frequency is up to 250,000 frequency samples....

Advertisement

ISM Band Transceivers

March 13, 2007 12:50 pm | Product Releases | Comments

Sirenza’s series of ISM Band Transceivers are fully-integrated 2FSK transceivers that include a complete receiver, transmitter and synthesizer on a single chip. The series includes the ML2722 (900 MHz), the ML2724 (2.4 GHz), the ML5800 (5.8 GHz) and the ML5824 (2.4/5.8 MHz). These transceivers are designed for simple ease-of-use with a minimum of external components and no tuning/alignment....

Radio Transceiver Module

March 13, 2007 12:50 pm | Product Releases | Comments

Radiometrix introduces its BiM3B radio transceiver module that is an enhanced higher-power replacement for the BiM3A-869-64. Two frequency variants are available within the European unlicensed SRD band. One offers 5 mW of output power (with no duty cycle restriction), and the other can produce a 25 mW output (with a 1% duty cycle restriction on 868....

I/O Connector System

March 13, 2007 12:50 pm | Product Releases | Comments

FCI has announced its Pwr TwinBlade™ connector system that is designed for cabling applications in equipment with high power demands like wireless base stations, aDSL and vDSL equipment, servers and storage devices. This system provides current-carrying capacity of up to 50 A per contact....

Card-Edge Connectors

March 13, 2007 12:50 pm | Product Releases | Comments

FCI develops press-fit, card-edge connectors to enable the implementation of MicroTCA™ (mTCA) architecture. These vertical card-edge connectors provide 170 contacts on 0.75 mm pitch, and they enable AMCTM cards to be plugged directly to a backplane, accommodating speeds up to 10 Gb/s. The press-fit version of the connectors extends the use of MicroTCA architecture to thicker backplanes where the size and complexity of the backplane is n...

Hybrid Socket Adapter

March 13, 2007 12:50 pm | Product Releases | Comments

Advanced Interconnections Corp. announces its hybrid socket adapter design that uses both male and female pins in an interstitial pattern in 0.65 mm pitch BGA and LGA footprints. The patented design features the reliability of screw-machined terminals with multi-finger contacts in a compact SMT socket....

Advertisement

RoHS Compliant Bias Tees

March 13, 2007 12:50 pm | Product Releases | Comments

MECA announces its RoHS compliant Bias Tees that cover wireless band applications from 0.500 to 2.500 GHz. Its modular design offers maximum connector flexibility at any port. They are vailable in 7/16 DIN, SMA, N, BNC and TNC configurations with RF power ratings to 300 W (3 kW peak) and maximum DC levels of 100 VDC/7 A....

WLAN Power Amplifiers

March 13, 2007 12:50 pm | Product Releases | Comments

Anadigics, Inc. announces its Wireless LAN (WLAN) power amplifiers (PAs) that support the upcoming 802.11n multi-input, multi-output (MIMO) standard, with applications that are expected to increase quickly as access point and notebook manufacturers accelerate to production. The benefits of MIMO technology include extended range beyond that of 802....

High Power Remote Units

March 13, 2007 12:50 pm | Product Releases | Comments

Andrew Corporation introduces its ION™-B High Power Single Band UMTS and its ION-B Medium Power Triple Band EGSM/GSM1800/UMTS remote units for radio-over-fiber applications that ensure coverage and capacity in wireless environments. These units offer high power options for extending in-building radio coverage, and for enhancing performance in multi-carrier and multi-band applications....

Connector Platform

March 13, 2007 12:50 pm | Product Releases | Comments

Amphenol TCS (ATCS) introduces its XCede™ connector platform that is designed to enable future data rate requirements for datacom, telecom, storage and wireless equipment, meeting and exceeding standards set for Ethernet, SONET/SDH, PCIe, Fiber Channel and Infiniband while employing a highly reliable press-fit attachment....

Near-Infrared Power Laser

March 13, 2007 12:50 pm | Product Releases | Comments

Dilas releases a near-infrared (NIR) emitting 60 W continuous-wave (CW) power laser at 808 nm and 980 nm from a single 19 emitter bar. Available in the industry-standard (25 325 mm) conduction-cooled package, this easy-to-integrate, high-brightness, multimode diode laser is an appropriate pump source for solid-state lasers used for medical and industrial applications....

Multimedia Handsets

March 13, 2007 12:50 pm | Product Releases | Comments

Skyworks Solutions, Inc. introduces its Helios™ II-Plus EDGE radio that is appropriate for manufacturers developing next-generation quad band handsets incorporating advanced multimedia features such as DVB-H, FM radios, MP3 players, digital cameras and Web browsing. It reduces radio frequency (RF) board space by an additional 25% when compared to the company’s previous Helios design....

Extreme Performance Families

March 13, 2007 12:50 pm | Product Releases | Comments

Lattice Semiconductor announces that the first members of its Extreme Performance LatticeSC and LatticeSCM (LatticeSC/M) FPGA families. The Extreme Performance LatticeSC/M devices are designed to provide the excellent performance and connectivity essential for high-speed system applications....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading