The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

GaAs HBT Driver Amplifiers

April 29, 2004 7:03 am | Product Releases | Comments

The RF3800 series of GaAs HBT drive power amplifiers, comprised of the RF3800, RF3802 and RF3805, provides a rugged, low-cost platform design for highly linear amplifier requirements. These multi-band platform devices offer an efficient, cost-effective alternative to higher-power (> 10 W P1dB) flange-mount SiLDMOS transistors....

Push To Talk Test System

April 29, 2004 7:03 am | Product Releases | Comments

Spirent announces the Push To Talk Over-The-Air (PTT-OTA) test system. The test system is flexible and scalable and will enable users to progress from an over-the-air test system to a fully integrated, automated lab-based test solution. The PTT-OTA system combines TestDrive test executive software for overall system control and test management, Universal Diagnostic Monitor (UDM) for automated mobile device control and monitoring, and Optico...

Instrument for Modem Testing

April 29, 2004 7:03 am | Product Releases | Comments

Noise Com announces the model UFX-9835 which generates near-end crosstalk (NEXT) and far-end crosstalk (FEXT) for production testing of DSL modems. The instrument contains two independent noise generators, each with continuously controllable output power from – 130 dBm/Hz to – 140 dBm/Hz....


GSM Module for WLL

April 29, 2004 7:03 am | Product Releases | Comments

Wavecom introduces the WISMO Quik Q2400, an entry-level solution adapted to the needs of wireless local loop (WLL) and machine-to-machine applications. The GSM protocol stack allows manufacturers to benefit from hands-free audio, multi-call management, and MMI interfaces such as LCD and keypad, on networks worldwide....

WLAN Power Meters

April 29, 2004 7:03 am | Product Releases | Comments

Anritsu introduces the ML2488A, a multi-standard power meter for WLAN and Bluetooth( power measurements. Addressing the important issues of power control, peak power, and timing in the design and implementation of wireless networks, Anritsu's ML2488A delivers accurate power measurements related to all Bluetooth and IEEE 802....

Matrix Switch

April 29, 2004 7:03 am | Product Releases | Comments

The 5025 Matrix Switch provides the reliability required for automated test and measurements, signal routing, and monitoring applications. This integrated coaxial switch matrix system with TTL control interface, performs up to 18 GHz and is configured as a 2 × 5 bi-directional, non-blocking switch matrix....

Die Cast Backshells

April 21, 2004 6:00 am | Product Releases | Comments

A new range of die cast backshells from Tyco Electronics, forming part of the AMPLIMITE D-subminiature range connector family, feature an innovative design with two cable entries. Rugged and durable, the backshells are available in a choice of two cable termination styles; a standard screw down cable clamp, or for higher performance requirements, a full crimped termination between inner and outer ferrule using the appropriate application to...

D-Subminiature Connectors

April 21, 2004 6:00 am | Product Releases | Comments

>Facilitate the delivery of RF, data, power and high voltage in a consolidated single package for numerous applications including backplanes, panel and board mounted. Widely used configurations include 3W3, 7W2, 9W4 and 8W8. 50OHgr> & 75OHgr> RF contacts are available for frequencies up to 5 GHz for various industry standard cables including 0....


Positive Locking Connectors

April 21, 2004 6:00 am | Product Releases | Comments

Duraline offers its positive locking style connectors and 30 degree housings. Duraline's positive latching connectors are weather and rain-tight and feature an internal gear tooth and latch arrangement to prevent accidental disconnection. Duraline's connectors achieve high locking pressures, yet unlocking is easily and quickly accomplished by depressing an insulated, external button....

Antennas in the New Age

April 13, 2004 1:08 pm | Product Releases | Comments

by Ofer Givati, Sinclair Technologies, Inc. The market for RF components and systems has undergone many transformations in recent years. Increased demand for RF applications and equipment has led to an equally compelling demand for lower cost products. Antennas are of course, an integral part of any RF communication systems....

Antenna Solution

April 7, 2004 12:09 pm | Product Releases | Comments

Maxrad. announces an above ceiling mount diversity in-building antenna for Wi-Fi and WLAN applications operating at 802.11b and 802.11g frequencies. The Michelangelo model UFOD24003PT diversity antenna combines two ultra flat omnidirectional antennas installed with a dual stud, above ceiling mount, designed to keep the antenna out-of-sight in occupied locations....

Media Processor

April 7, 2004 12:09 pm | Product Releases | Comments

Atsana introduces its J2211 media processor for embedded applications such as multimedia on mobile handsets. The J2211 is a fully programmable system-on-a-chip (SoC) that functions as a companion processor to handset baseband processors. The device features Atsana's array processor as well as an ARM9 RISC processor, providing a solution for video, image audio, and graphics processing....

Narrow Band Medium Power Amps

April 7, 2004 12:09 pm | Product Releases | Comments

Aeroflex announces their narrow band medium power amplifier (NBPAs) product family. The PA015018-33 is the first unit of the family with a frequency range of 1.5 to 1.9 GHz. The design features a fault monitor able to respond in less than 200 nS allowing the user to separate the existence of a single pulse in the pulse stream....


April 7, 2004 12:09 pm | Product Releases | Comments

White Electronic Designs announces the release of their 32 M × 64 DDR SDRAM. The 256 MB (2Gb) DDR SDRAM is a CMOS, dynamic random-access, memory using four chips containing 536,870,912 bits. Each chip is internally configured as a quad-bank DRAM. The device uses double data rate architecture to achieve operation....

Boundary Scan Operation Assistant

April 7, 2004 11:52 am | Product Releases | Comments

The time it takes first-time and occasional users to develop a functional JTAG test has been reduced by the ScanWorks® Assistant from ASSET. Key features of the Assistant include step-by-step advice to users. It explains all of the options the user has available and anticipates many of the questions new users typically have about JTAG testing....


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.