Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Surface Mount Duplexer

April 4, 2005 8:47 am | Product Releases | Comments

Raditek adds to its range of duplexers and filters with this surface mount, GSM band 880 to 960 MHz duplexer, the RDUP-880-960M-SW-S. This duplexer has a chance bandwidth of 25 MHz, in band insertion loss of 3....

RF Subsystem

April 4, 2005 8:47 am | Product Releases | Comments

Freescale introduces its quad-band GSM/GPRS/EDGE RF subsystem for world phones. The subsystem minimizes the amount of factory calibration with the company’s polar architecture. This highly integrated subsystem consists of the MMM6000 transceiver and the MMM6027 power amplifier front end module. Combined, these two components provide an antenna-to-bits radio in a board space of less than 250 mm 2 ....

Processor Cores

April 4, 2005 8:47 am | Product Releases | Comments

ARC International announces that their ARC™ 600 and 700 families now include eleven configurable cores that offer pre-optimized size, speed, and power characteristics to enable developers to meet requirements of high-growth embedded markets. The ARC 600 family of processor cores uses a five-stage pipeline to deliver 1....

Advertisement

SMT LNAs

April 4, 2005 8:47 am | Product Releases | Comments

Hittite announces two SMT compatible, RoHS compliant low noise amplifiers for microwave radio, test, and sensor applications from 9 to 26 GHz. The HMC516LC5 and the HMC517LC4 GaAs PHEMT MMIC LNAs are designed to meet the needs of microwave radio designers who need a low noise front end device that can also provide enough output power to drive a mixer LO or function as a general purpose buffer amp....

Radio Antenna Modules

April 4, 2005 8:47 am | Product Releases | Comments

Antenova launches RADIONOVA, a range of fully integrated radio antenna modules that incorporate the company's high-efficiency High Dielectric Antenna (HDA) technology with radio frequency (RF) components in a single module. The balanced antenna is highly resistant to de-tuning, so the same RADIONOVA module can be used across multiple product designs and will operate at multiple frequencies....

Stereo D/A Converter

April 4, 2005 8:47 am | Product Releases | Comments

Atmel® announces its AT73C213 audio companion chip for multimedia portable applications. Manufactured on the company’s CMOS process, the chip integrates an audio-quality 20-bit stereo DAC and an audio power amplifier providing up to 1 W. The chip is suited for any application where a high-quality audio interface is required, such as mobile phones, PDAs, palmtop computers, digital still cameras, multimedia portable devices, music players,...

E-pHEMT Amplifier

April 4, 2005 8:47 am | Product Releases | Comments

Agilent introduces an E-pHEMT (enhancement-mode pseudomorphic high-electron-mobility transistor) MMIC (monolithic microwave integrated circuit) low noise amplifier for applications in the 0.5 to 6 GHz frequency range, including WLANs, WiMAX point-to-multipoint systems, and cordless phones. The MGA-665P8, from Agilent’s Semiconductor Products Group, is designed for applications operating in the 5 GHz UNII (unlicensed national information inf...

Positioning Solution

April 4, 2005 8:47 am | Product Releases | Comments

SiGe Semiconductor announces a Global Positioning System (GPS) solution to address the performance, size, and battery life requirements of cellular phones. The SE8901 GPS receiver system is based on an architecture that allows cellular handset manufacturers to support location based services at a low price....

Advertisement

Receiver Reference Design

April 4, 2005 8:47 am | Product Releases | Comments

Lattice Semiconductor announces its Rake Receiver reference design, targeted at basestations in wireless telecom applications. A Rake Receiver is used to counter the effects of RF multipath fading due to atmospheric absorption, ionospheric reflection and refraction, and reflection from terrestrial objects such as mountains and buildings....

Transmit Filter

April 4, 2005 8:47 am | Product Releases | Comments

Agilent announces a high-performance film bulk acoustic resonator (FBAR) full-band transmit filter for handsets, data cards, and other wireless products operating in the U.S. PCS (personal communications service) frequency band. The ACPF-7003 features higher rejection — 35 dB minimum, 45 dB typical in the 1930 to 1990 MHz receive band — than the company’s ACPF-7002 full-band filter....

Integrated Flow

April 4, 2005 8:47 am | Product Releases | Comments

Arithmatica and Cadence Design Systems, Inc. announce an integrated flow. Developed as part of the Cadence® OpenChoice Program, the flow includes Arithmatica CellMath silicon IP as well as Cadence synthesis technology — Encounter™ RTL Compiler synthesis — and Encounter Conformal® formal verification tools....

Spiral Inductor Design Kit

April 4, 2005 8:47 am | Product Releases | Comments

UMC and Ansoft Corporation announce a parameterized spiral inductor design kit based on full-wave simulation. The kit enables RFCMOS designers to create and simulate custom inductor geometries by directly linking Ansoft's HFSS®, Ansoft Designer®, and Nexxim™ with UMC's CMOS process parameters....

Receive Module

April 4, 2005 8:47 am | Product Releases | Comments

Aethercomm Part Number Rx 3.0-3.5-1.0 is an S band receive module that includes a digital phase shifter and attenuator along with low noise amplification. This module exhibits a typical noise figure of 1.0 dB. Minimum gain across the band is 32 dB with typical gain flatness of ± 0.50 dB. This Rx unit has good phase linearity performance over the band....

Physical IP

April 4, 2005 8:47 am | Product Releases | Comments

Virage Logic announces its Silicon Aware IP™ initiative. Silicon Aware IP is Physical IP, such as memories, logic, and I/Os, designed with embedded infrastructure IP for test, diagnostics, repair, and yield enhancements. The result is IP that is high yielding and enables quick time-to-volume at advanced process nodes....

Flash Microcontroller

April 4, 2005 8:47 am | Product Releases | Comments

EM Microelectronic announces a Flash microcontroller, the EM6580, combining several features including true low current operation with no external components, 4-bit ADC or 12-level voltage level detector, and on-chip Flash memory. It is also possible to store a unique serial ID number on each device produced, allowing for identification and traceability....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading