Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Key Injection Platform

October 3, 2005 9:16 am | Product Releases | Comments

Certicom’s KeyInject is a trusted key injection platform for anti-cloning. It enables device producers to track production by contract manufacturers by controlling access to keying information, metering the use of this information, and generating reports on key usage. In the manufacturing process, producers should use public-key cryptography to embed a private key that uniquely identifies a device, giving it future access to services, linki...

Rapid Prototyping Platform

October 3, 2005 9:16 am | Product Releases | Comments

Spectrum Signal Processing Inc. introduces the flexComm™ HCDR-1000 CRDP, a communications intelligence (COMINT) rapid-prototyping and development platform. This fully integrated, commercial-off-the-shelf (COTS) software defined radio platform is designed to promote the rapid development and deployment of intelligence systems for the intercept and processing of communications signals....

Interactive Software Updated

October 3, 2005 9:16 am | Product Releases | Comments

Spectrum Microwave announces that it has updated CASCADE interactive software to allow engineers to design a circuit meeting their specific criteria by adding a wide variety of RF & microwave components such as amplifiers, mixers, oscillators and filters. CASCADE allows an engineer to optimize their design by viewing individual component contribution to overall system performance, evaluate trade-offs in component selection and their impact ...

Advertisement

Thin Film Fuse

October 3, 2005 9:16 am | Product Releases | Comments

KOA Speer Electronics, Inc. introduces a miniature 0402 size thin film fuse that has fast-acting fusing characteristics for very fast response to unwanted circuit inputs. The space-saving TF10A offers low internal resistance and is suitable for overcurrent protection of circuit blocks in electronic devices....

DC/DC Converters and Control Modules

October 3, 2005 9:16 am | Product Releases | Comments

Vishay Intertechnology, Inc. announces that it is making all of its FunctionPAK® DC/DC converters and current control modules available in a new surface-mount adaptor board configuration to support engineering prototype assembly. While most production operations can handle the standard FunctionPAK surface-mount BGA configuration, the new SM versions of the FunctionPAK devices will facilitate the assembly process for any engineering lab t...

80 Ms/s ADC

October 3, 2005 9:16 am | Product Releases | Comments

Maxim Integrated Products announces the MAX19586, a 16-bit 80 Ms/s A/D converter (ADC). The MAX19586 offers impressive dynamic performance including a noise floor of – 82 dBFS, 80 dB SNR, and 96 dBc spurious-free dynamic range (SFDR) at an input frequency of 10 MHz (– 2dB input amplitude)....

Switch in Chip Scale Package

October 3, 2005 9:16 am | Product Releases | Comments

Fairchild Semiconductor introduces the FSUSB23, a single-port USB 2.0 "Hi-Speed" (480 Mb/s) analog switch in a MicroPak™ chip scale package (CSP). Its compact packaging, combined with low power consumption (< 1µA) and wide bandwidth (> 720 MHz) operation, make it well suited for today's multi-functional cell phones....

2.7 GHz Radio Test System

October 3, 2005 9:16 am | Wireless Design & Development | Product Releases | Comments

Aeroflex Incorporated announces the release of a 2.7 GHz service monitor. The IFR 3902, based on the IFR 3901 1GHz radio test set, expands the operating range of the service monitor to 2.7 GHz for both generating and receiving analog and digital RF signals. The IFR 3902 and IFR 3901 radio test systems now feature new system test capabilities....

Advertisement

Press-fit Version of D-Sub Connector

October 3, 2005 9:16 am | Product Releases | Comments

ERNI announces that it is now offering a press-fit version of its vertical D-sub series. The new press-fit D-sub connectors are available in a 6.3 mm format with 9, 15, 25 or 37 positions. The contacts are plated in the mating area to meet IEC 807-3 / DIN 41652 requirements and tin-plated in the termination area....

Miniaturized SAW Duplexer

October 3, 2005 9:16 am | Product Releases | Comments

Murata Electronics North America introduces an ultra-small SAW duplexer series appropriate for wireless communication products using CDMA800 technology such as cell phones and laptop computers. The advanced SAW duplexer series (global part number SAYSW836MAF0F00), features decreased footprint, higher isolation and attenuation, low insertion loss, better reliability and increased power handling....

EDA Software Platforms

October 3, 2005 9:16 am | Product Releases | Comments

Agilent Technologies Inc. announces its 2005 releases of Advanced Design System (ADS) and RF Design Environment (RFDE). Both EDA software platforms contain Agilent’s simulation technologies that help designers of wireless communications products get products to market faster. The new simulation technologies are fully integrated into the software....

Single Power Supply Tracking Controller

October 3, 2005 9:16 am | Product Releases | Comments

Linear Technology Corporation introduces the LTC2927, a single power supply tracking controller that simplifies the tracking and sequencing requirements of complex distributed power architectures. Housed in an 8-lead SOT-23 or 3 mm × 2 mm DFN package, the compact device can be conveniently placed at the point of load....

0203 Size Chip Resistor on Alumina

October 3, 2005 9:16 am | Product Releases | Comments

State of the Art (SOTA), Inc. announces a 0203 (.020 inches× .030 inches) size chip resistor on alumina. The new configuration provides a doubling of the voltage rating, from 15 to 30 V on the same footprint, as compared to the company’s 0302 chip. The power handling capability is comparable at 40 mV....

RoHS Compliant SP3T Switch

October 3, 2005 9:16 am | Product Releases | Comments

M/A-COM announces a RoHS-compliant SP3T T/R switch for tri mode mobile phones. The MASWSS0144 switch offers versatility with a low insertion loss, which maximizes system performance while reducing overall design complexity. It is configured to enable switching from a common antenna port to dual band GSM, CDMA, cellular, PCS and GPS receive ports....

RoHS-compliant DPDT Switch

October 3, 2005 9:16 am | Product Releases | Comments

M/A-COM introduces an RoHS-compliant DPDT switch for use in WLAN applications that require individual path control, low insertion loss, high isolation and small size at a low cost. The MASWSS0107, with its low leakage current, is a low insertion loss switch which maximizes system performance while reducing DC power consumption....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading