Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Translators

May 30, 2003 11:38 am | Product Releases | Comments

STMicroelectronics introduces a 16-bit dual-supply bus transceiver level translator available in a TFBGA package. The 74VCX1632245 provides a two-way asynchronous communications interface between buses at 3.3 V and 2.5 V or 1.8 V in mixed 3.3 V/1.8 V, 3.3 V/2.5 V or 2.5 V/1.8 V supply systems. The parts offer symmetrical output impedance and balanced propagation delays....

Power System Architecture

May 30, 2003 11:38 am | Product Releases | Comments

Vicor introduces a power system architecture based on power conversion technologies. The architecture, called Factorized Power Architecture (FPA), is enabled by power conversion components called V•I chips or VICs. V•I chips process up to 200 watts of power in a 0.25 cubic inch power Ball Grid Array (BGA) package....

Connectable LED Modules

May 30, 2003 11:38 am | Product Releases | Comments

The StripLED connectable LED modules contain four super-bright, wide angle (85°C) SpiderLEDs, on 3-inch double-ended connector harness for daisy chain assembly, and a pre-applied strip of 3M® double-sided foam tape for "peel-and-stick" placement. LEDs are wired in parallel and function independently....

Advertisement

Embedded I/O Architecture

May 30, 2003 11:38 am | Product Releases | Comments

Sealevel Systems introduces an embedded industrial I/O architecture, eI/O. eI/O products achieve expansion in groups of 8 inputs or 8 outputs per module. This allows the user to mix and match modules providing delay, opto-isolated in/out, A/D, D/A, and other commonly used I/O to create a customized embedded I/O subsystem....

USB Transceivers

May 30, 2003 11:38 am | Product Releases | Comments

The MAX3450E/MAX3451E/MAX3452E ± 15 kV ESD protected USB transceivers provide low-voltage ASIC/CPUs a USB-compliant physical layer interface. The MAX3450E/MAX3451E are powered in three ways: VBUS from the USB host, directly from a Li battery, or from a 3.3 supply. The MAX3452E requires a 4 V to 5....

LED Driver

May 30, 2003 11:38 am | Product Releases | Comments

The MAX1582 is a white LED driver that powers up to six white LEDs in series with a constant current. The dual-segment, step-up converter includes a 30 V, low drain-source on-resistance, N-channel MOSFET switch to achieve 84% efficiency and maximum battery life. The MAX1582 operates at constant 1 MHz switching frequency, enabling use of a low-profile indicator and a 0....

Aluminum Nitride Terminations

May 30, 2003 11:38 am | Product Releases | Comments

International Manufacturing Services (IMS) announces the IMS aluminum nitride termination. Tolerances are available to 2% with power handling up to 150 W. Typical return loss is 25 dB to 3 GHz in a 50 Ohm system. Termination size is .560 × .250 × .110 (including mounting flange). Mounting hole diameter is ....

Noise Suppression Sheet

May 30, 2003 11:38 am | Product Releases | Comments

Hitachi Metals introduces a halogen-free noise suppression sheet, "Absorshield™ KE Series", which have a high suppression effect of RF noise in the frequency range of 0.1 to 10 GHz. The sheet is composed of high performance nanocrystalline soft magnetic materials, FINEMET™, with a high suppression effect on RF noise....

Advertisement

Omni Antennas

May 30, 2003 11:38 am | Product Releases | Comments

MAXRAD, Inc. announced a high gain XtremeWave™ omnidirectional antenna model. The MFB24012 provides 12 dBi gain performance at 2.4 GHz frequencies, with a VSWR of less than 1.5:1. Measuring 44 inches high, the MFB24012 is a compact, high gain 2.4 GHz antenna. It features a U.V. stable, pultruded fiberglass radome that permits safe outdoor installation under the harshest climates and situations....

Ceramic EMI Filters

May 30, 2003 11:38 am | Product Releases | Comments

Tusonix's 4304 Press-In Ceramic EMI filters are suited for a variety of microwave and RF applications that include attenuators, oscillators, synthesizers, and combiners. These EMI filters have a flange diameter or .156 ± .005 (3.96 ± 0.13 metric), an overall length of .625 ± .025 (15....

Subminiature Connectors

May 30, 2003 11:38 am | Product Releases | Comments

...

Solid State Attenuator

May 30, 2003 11:38 am | Product Releases | Comments

The VVAN-2535-60SP-NS30 is a 2.5 - 3.5 GHz, 60 dB dynamic range high speed voltage variable solid state attenuator with 1.25 - 1.75 dB insertion loss. VSWR is 1.8:1. Attenuation flatness is ± 0.3 dB maximum. Attenuation accuracy is ± 3.0 dB maximum. Transfer function is 10 dB/Volt. Switching speed is 700 nS....

Log Video Amplifiers

May 30, 2003 11:38 am | Product Releases | Comments

PMI Model No. SDLVA-07103-70-LA3 is a 750 MHz to 1.25 GHz frequency range (0.3 to 2.0 GHz units available) successive detection log video amplifier (SDLVA). This SDLVA provides up to 80 dB of dynamic range in 25 nS speed and with low AM/PM conversion and a nominal 20 MHz video bandwidth. The log linearity is ± 1....

Video Transient Switch

May 30, 2003 11:38 am | Product Releases | Comments

Model No. SWN-1140-3DR-STD with options 218, B08, and B01-12V is a 2.0 - 18.0 GHz low video transient SP3T switch. FSWR is 2:1. Isolation is 60 dB. Insertion loss is 3.5 dB. Switching speed is 20 nsec rise/fall time. On/off delay is 70 nsec. RF power is +20 dBm and TTL control logic (0) on. www....

Selectable Oscillators

May 30, 2003 11:38 am | Product Releases | Comments

Elcom introduces an ultra low phase noise, ruggedized, selectable oscillator, designed for SATCOM converters and wideband receiver applications. The SFDRO series frequency phase locked oscillators has an RF output frequency of 0.5 to 26 GHz. RF output power is +12 to +15 dBm. RF output impedance is 50 Ohms....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading