Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

MP3 Decoder

September 2, 2005 7:27 am | Product Releases | Comments

Atmel® Corporation introduces a ready-to-use single-chip MP3 decoder combining all the features to allow a mobile phone to play MP3 music and ring tones and to convert it into a pen drive. The AT83SND2CMP3 features an easy-to-implement protocol that can be added to the baseband firmware. The baseband processor, acting as a master, controls the slave player with simple commands such as: Play, Pause, Stop, Next, Copy File, Get File....

Filterless Audio Amplifier

August 3, 2005 6:38 am | Product Releases | Comments

ON Semiconductor announces the NCP2820, a filterless Class-D audio amplifier designed for portable applications. From a 5 V supply, the NCP2820 is capable of delivering 2.65 W of continuous average power into a 4 ohm bridge-tied load (BTL). Under the same conditions, the output power stage can provide 1....

Surface-Mount PIN Photodiodes

August 3, 2005 6:38 am | Product Releases | Comments

Vishay announces four high-performance PIN photodiodes that offer high sensitivity in a surface-mount package measuring 4.24 × 5.0 mm with a 1.12 mm height profile. These additions to Vishay Semiconductors’ TEMD5xxx line of PIN photodiodes combine high-speed response and excellent sensitivity, enabled by optional daylight filtering and a choice of two large radiant-sensitive areas measuring 7....

Advertisement

Expanded Custom Options for EMI Filter Plates

August 3, 2005 6:38 am | Product Releases | Comments

Spectrum Control, Inc. has increased the scope of custom designs and value-added services for its EMI filter plate line. These filter plates incorporate a variety of capacitive and inductive filter elements for RF isolation from 5 MHz to 1 GHz and are appropriate for cost-sensitive, high-volume, industrial applications....

Evaluation Kit for ZigBee Device

August 3, 2005 6:38 am | Wireless Design & Development | Product Releases | Comments

Jennic has released development kits using network protocol stacks from two of its partners, and demonstrate the first solutions for industrial, building and home automation applications based on its single chip IEEE802.15.4 device. Using the evaluation kit, the company will show the demo of a ZigBee application on a single chip integrated into a mobile phone for use in home automation using a network stack from Korwin; and a building and i...

Expanded Capacitor Range

August 3, 2005 6:38 am | Product Releases | Comments

AVX has enhanced the FD series capacitor to provide a specific energy over 1000 J per liter and to reach 1350 J per liter with 2500 V. Enhanced electrical performance was developed to specifically to meet the needs of the medical, military and industrial markets. The FDV1 is available in a wrapped package and is used mainly in military and industrial markets....

Bare Element Resistor Series

August 3, 2005 6:38 am | Product Releases | Comments

Ohmite Manufacturing Company announces its 610 and 650 Series four terminal, bare element resistors. These devices provide low resistance values (to 0.005Ω) for relatively high current requirements, with the advantages of a radial Kelvin configuration and PC board mounting capability, making them appropriate for current sense applications....

Single Chip UWB Device

August 3, 2005 6:38 am | Product Releases | Comments

The RTMI-100 from Artimi is a complete UWB solution in a single chip implemented in 0.18µ SiGe BiCMOS. The digital portion of the device is implemented in CMOS and the high frequency section implemented in SiGe. RTMI-100 can process up to 4 GHz of coherent bandwidth and includes integrated LNA and PA, adaptive channel digital radio, IEEE 802....

Advertisement

Capacitor Chips

August 3, 2005 6:38 am | Product Releases | Comments

AVX has developed porcelain and ceramic dielectric multilayer capacitor (MLC) chips with an internal construction that allows for as much as 40% lower equivalent series resistance than in previous versions. Designated the SQ series, the chips are appropriate for RF/microwave applications ranging from 10 MHz to 4....

RFS Braided Cables

August 3, 2005 6:38 am | Product Releases | Comments

RFS has made available its RGFLEX braided cables globally. Exhibiting good attenuation and electromagnetic screen performance, the RFS RGFLEX braided coaxial cable and connector range is appropriate for providing interconnection between low power RF equipment — such as radio basestation components, cameras for security systems, digital television systems and more....

Silicon Transistors

August 3, 2005 6:38 am | Product Releases | Comments

CEL announces that NEC has released a low profile M33 that measures 0.64 mm × 0.84 mm × 0.4 mm (including leads) and houses a series of NEC Silicon and Silicon Germanium devices developed specifically for VCO module applications. Available are the NE685M33 and NE851M33 Silicon Bipolars and the NESG2107M33 Silicon Germanium transistor....

Single- and Dual-band SAW Filters

August 3, 2005 6:38 am | Product Releases | Comments

Murata Electronics introduces single-band (SAFEB) and dual-band (SAWEP) SAW filters for use in cell phones, combining film micro-machining technology with high-density mounting capabilities and resin sealing. The SAFEB series is now available in the dimensions of 1.35 × 1.05 × 0.6 mm, weighing 0....

High Frequency Amplifier

August 3, 2005 6:38 am | Product Releases | Comments

AR Worldwide introduces a 20 W amplifier into its family of high frequency amplifiers. The 20S4G11 joins models 1S4G11, 5S4G11 and 10S4G11, which have rated power outputs of 1, 5 and 10 respectively, with a frequency response of 4.0 to 10.6 GHz. Product specifications include: rated power output: 20 W minimum; flatness: +2....

Isolated Switch Filter Bank

August 3, 2005 6:38 am | Product Releases | Comments

Spectrum SEI Microwave’s isolated switch filter bank offers a compact, two-channel selectable filter suitable for IF filtering. This filter bank uses integral input and output isolators to achieve the required return loss (VSWR) without compromising its narrow band performance. Spectrum’s isolated switched filter bank assembly enables RF engineers and system designers to dynamically configure their systems’ capabilities....

Thick Film Power Resistors

August 3, 2005 6:38 am | Product Releases | Comments

Vishay introduces 30, 50 and 100 W devices in industry-standard TO220 and TO247 packages. The resistors use a ceramic package design (with no metal tab) for direct-mounting on heatsinks, and feature low inductance of < 0.1 H, making them appropriate for use in power conversion and control applications in a variety of industries....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading