The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

M8 Connectors

November 1, 2005 9:58 am | Product Releases | Comments

ERNI announces M8 male and female connectors designed for automation technology. The first products will be three- and four-pin female connectors, and a four-pin version of the male connector. These connectors can be used to build a flexible I/O-connection on the circuit board. The interconnect geometry complies with the IEC 61067-2-101 standard....

Arbitrary Waveform Generator

November 1, 2005 9:58 am | Product Releases | Comments

Agilent Technologies Inc. announces two additional models to its N6030A series arbitrary waveform generator (AWG) family. The N6032A, a dual-channel AWG designed for radar and military communications, delivers 625 MS/s and 15 bits of vertical resolution per channel to create wideband waveforms up to 250 MHz wide....

16-bit, 130 Ms/s ADC

November 1, 2005 9:58 am | Product Releases | Comments

Linear Technology’s LTC2206 is a 16-bit, 130 Ms/s ADC that addresses the key requirements for maximizing performance of high sensitivity receivers and data acquisition systems. The device’s spurious free dynamic range (SFDR) performance of 100 dBc, combined with 78 dB signal to noise ratio (SNR), enable it to resolve low level signals in the presence of large interferers and blockers....


Smart Battery Chip and Development Tool

November 1, 2005 9:58 am | Product Releases | Comments

Atmel® Corporation announces the ATAVRSB100, a smart battery development kit. The ATAVRSB100 is based on the company’s ATmega406, an integrated single-chip smart battery AVR® device, targeting Lithium Ion batteries for laptop computers, medical equipment and portable instrumentation. It demonstrates the smart battery monitoring and protection capabilities while reducing the time to market for new smart battery designs....


Low-end Microcontrollers for Wi-Fi Clients

November 1, 2005 9:57 am | by Ajay Jadhav | Product Releases | Comments

The market for low-end processors in Wi-Fi client stations is a target of opportunity as standards solidify and points of presence become conveniently accessible. Glossary of Acronyms AP — Access Point BSS — Basic Service Set ESS — Extended Service Set GPIO — General-Purpose Input/Output ...


Digital RF and Handset Integration

November 1, 2005 9:57 am | by Bill Krenik and Peter Rickert | Product Releases | Comments

As handset complexity continues to grow, the devices will be expected to incorporate an increasing number of mobile connectivity technologies, standards and applications without compromising performance. Increasing core component efficiency by using digital RF technology is an ideal solution....

Improving the Utilization of RF Spectrum through Advancements in Radio Technology

November 1, 2005 9:47 am | Product Releases | Comments

By Joseph Bobier and Stuart Schwartz As engineers develop new ways to deliver information wirelessly, policymakers and regulators seek to increase the availability and efficiency of RF spectrum. Last year, the U.S. General Accounting Office (GAO) provided a technical "wish list" for improving RF spectrum utilization, suggesting that the industry focus on: • Components capable of operating at > 100 GHz....

WiMAX Companies: On Their Marks, Ready to Go

November 1, 2005 9:43 am | Product Releases | Comments

Leading WiMAX equipment and semiconductor vendors with products poised to receive an official WiMAX certification stamp from the WiMAX Forum are preparing for a fast rollout of their newly certified products. In August, Airspan Networks, Aperto Networks, Proxim, Sequans and Wavesat delivered their respective WiMAX solutions to Cetecom Labs, in Malaga, Spain, for conformance and interoperability testing....


RF Transceiver Family

November 1, 2005 9:42 am | Product Releases | Comments

Atmel® Corporation introduces a single-chip RF transceiver family, providing high level performance for ISM band applications. The ATA542x transceiver family is designed for applications in the 315/345/433/868/915 MHz bands. A key feature of this family of chipsets is its notably low current consumption....


November 1, 2005 9:41 am | Product Releases | Comments

Aeroflex has boosted the frequency of the PN9276 microwave down-converter to 50 GHz to enable phase noise testing for higher frequency applications. The Aeroflex PN9276 microwave down-converter works with the company's PN9500. Aeroflex phase noise products provide a combination of high bandwidth with low noise performance suited for radar, commercial wireless, satellite terrestrial microwave links, and calibration labs....

Audio Processing

November 1, 2005 9:41 am | Product Releases | Comments

AMI Semiconductor announces the BelaSigna 250 audio processing system, targeted at a variety of applications, including communication devices, specialty headsets, remote sensors, and other portable applications requiring audio compression and recording, sound management or echo and speech processing functionality....

Power Combiner

November 1, 2005 9:41 am | Product Releases | Comments

Renaissance Electronics has designed a two-way high power combiner for the 800 and 900 MHz cellular band applications. This combiner is aimed for providing a common antenna port for two different cellular networks that operate on different power levels. The combiner incorporates a Wilkinson resistor arrangement coupled with fan cooled, high efficiency heat sink that enables input power imbalance of up to 200 W between ports....

My, How Times Have Changed

November 1, 2005 9:40 am | Product Releases | Comments

Ern Worthman, Editorial Director I'm from the pager generation. You know, the time before cell phones and computers. The time when you could go on the road and if someone needed you, all you got was an annoying beep telling you to look for a pay phone....


November 1, 2005 9:37 am | Product Releases | Comments

MCL introduces the MT4400 weather-resistant, antenna mount TWT amplifier, available for DBS-band applications at 750 and 500 W. In addition, the MT4400 is available for C-, X- or Ku-band applications at 750 W. Tri-band is available upon request. Some of the amplifier’s features include advanced thermal design, rugged construction for extreme environments, optional hand-held controller for complete local monitoring and control, prime power i...

Wideband Millimeter Wave Amplifiers

November 1, 2005 9:37 am | Product Releases | Comments

TriQuint announces four high performance products that lead-free and RoHS-compliant. The TGA4521 is a wideband millimeter wave driver amplifier covering the 32 to 45 GHz frequency range. This product has +25 dBm saturated output power and +24 dBm 1 dB compressed output power. The TGA4522 is a balanced version of the TGA4521: it offers a higher output power capability with +27....


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.