Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Thin Film Flat Chip Fuses

September 2, 2005 7:32 am | Product Releases | Comments

Vishay announces three new devices in the MFU series of thin film flat chip fuses that offer quick-acting fuse characteristics and stability verified in accordance with UL 248-14 and IEC 60127-4. The Vishay Beyschlag MFU 0603 and MFU 0805 devices are rated for a current range of 0.5 to 4 A. However, the MFU 1206 devices feature rated current values up to 5....

3D Electromagnetic-field Simulation Software

September 2, 2005 7:32 am | Product Releases | Comments

Ansoft Corporation announces a Distributed Analysis option for use with HFSS™ v10, Q3D Extractor™ v7 and Maxwell® 3D v11. The Distributed Analysis option is an effective way to increase the simulation power of HFSS, Q3D Extractor and/or Maxwell 3D available to an individual engineer. This option applies parallel computation toward the investigation of parametric design variations, saving overall analysis time while maximizing the...

S-Parameter Measurement Capability

September 2, 2005 7:32 am | Product Releases | Comments

Agilent introduces built-in impedance and S-parameter software for its 86100C Infiniium digital communication analyzer (DCA-J). The Agilent 86100C-202 enhanced impedance and S-parameter software enables high-speed digital designers to make both single-ended and differential S-parameter measurements on their devices according to the various high-speed serial communication standards....

Advertisement

42.98 GHz Spectrum Analyzer

September 2, 2005 7:32 am | Product Releases | Comments

Agilent Technologies announces a 42.98 GHz spectrum analyzer, which offers resolution bandwidths up to 8 MHz. The E4447A offers high-performance analysis for designers and production engineers of microwave and millimeter applications, including satellite and emerging digital communications, pulsed signals, and 3G wireless systems....

IP Core Soft Microcontroller

September 2, 2005 7:32 am | Product Releases | Comments

Lattice Semiconductor announces its LatticeMico8™, an 8-bit "soft" microcontroller core for the LatticeECP™, LatticeEC™ and LatticeXP™ families of FPGAs, as well as the recently released MachXO™ family of crossover programmable logic devices. In order to encourage user experimentation, development and contributions, the company is providing an open intellectual property (IP) core license....

IR LEDs

September 2, 2005 7:32 am | Product Releases | Comments

TT electronics OPTEK Technology has developed an infrared LED mounted in a 0805 chip package. The OP200 devices are GaAlAs infrared LEDs (880 nm wavelength), packaged in a 0805 chip with a flat molded lens, which provides a wide beam angle and an evenly distributed emission pattern. Electrical performance of the OP200 is characterized at 30 V reverse voltage, 1....

ESD Suppression Devices

September 2, 2005 7:32 am | Product Releases | Comments

ON Semiconductor introduces the µESD (micro ESD) dual series of micro-packaged electro static discharge (ESD) protection diodes. The µESD dual series is designed to protect voltage sensitive components for two lines in applications that demand minimal board space and low profiles. The series clamps 30 kV ESD transients — per the IEC61000-4-2 standard — in less than a nanosecond to ensure voltage sensitive components are prot...

PLL Clock Generation IC

September 2, 2005 7:32 am | Product Releases | Comments

ON Semiconductor announces the NB4N507A — the first in a series of fully-integrated phase lock loop (PLL) ICs designed to replace expensive crystal oscillators for clock generation in a variety of consumer and networking applications. The NB4N507A generates a clock signal ranging from 50 to 200 MHz via a reference crystal....

Advertisement

Digital Output Optocouplers

September 2, 2005 7:32 am | Product Releases | Comments

California Eastern Laboratories (CEL) introduces a series of 10 Mb/s digital output optocouplers from NEC. These open collector-type opto-isolators feature good common mode transient immunity, impressive pulse width distortion and low power consumption. These features make them suited for a variety of high data rate industrial communications applications....

WiMAX Amplifier

September 2, 2005 7:32 am | Product Releases | Comments

Stealth Microwave introduces the SM3437-43L, an ultra-linear GaAs FET amplifier designed for WiMAX BTS applications. The unit operates from 3.4 to 3.7 GHz with a P1dB of +43 dBm and an OIP 3 of +63 dBm. Small signal gain is 50 dB with a flatness of ± 0.5 dB across the band. Standard features include a + 12 VDC supply, thermal protection with auto reset, and over/reverse voltage protection....

Voltage Dividers

September 2, 2005 7:32 am | Product Releases | Comments

TT Electronics BI Technologies Electronic Component Division has developed an engineering sample kit of its SOT-23 packaged precision voltage divider networks. Designated the SS1 series, these divider networks consist of two ultra-stable nichrome thin film resistors on silicon substrates, connected in series within a standard plastic SOT-23 lead package....

Digital Cable Assembly

September 2, 2005 7:32 am | Product Releases | Comments

W. L. Gore & Associates, Inc. and FCI combine their technologies to offer a high data rate digital interconnect product. The data link leverages the advantages of FCI’s AirMax VS® high-speed connection system with Gore’s expertise in cable assembly development. The configuration utilizes the patented AirMax connector concept to provide desirable high frequency performance without the use of elaborate shielding....

Dual-band CDMA Power Amplifiers

September 2, 2005 7:32 am | Product Releases | Comments

Anadigicsannounces a family of dual-band InGaP power amplifiers (PAs) supporting the AMPS/cellular and PCS frequency bands. The PAs provide full compliance with CDMA 1xRTT and CDMA 1xEV-DO standards, high efficiency, and desirable linearity to enable impressive signal integrity for mobile data applications....

Hybrid Ring Divider/Combiners

September 2, 2005 7:32 am | Product Releases | Comments

MECA announces two high power, hybrid ring divider/combiners designed to cover wireless bands from 0.810 to 0.960 GHz and 1.700 to 2.000 GHz with average RF power handling capability of 1000 W (5 kW peak). Other high power, hybrid ring models are available in frequencies spanning from 0.810 to 6....

SMT InGaP HBT MMIC VCOs

September 2, 2005 7:32 am | Product Releases | Comments

Hittite announces three GaAs HBT MMIC Voltage Controlled Oscillators (VCOs) for Point to Point/Multipoint, VSAT, Test Equipment and Industrial applications at 11, 12 & 24 GHz.The HMC513LP5, HMC514LP5, and HMC533LP4 are fully integrated InGaP HBT VCOs. These MMIC VCOs incorporate an integrated resonator, negative resistance device, and varactor diode, and exhibit desirable phase noise performance over temperature, shock, and process due to t...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading