Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Coaxial Resonator VCO

March 2, 2006 7:00 am | Product Releases | Comments

Z-Communications announces their coaxial-resonator-based VCO series, in S- and C-bands, with low phase noise performance.CRO2590A (2480-2700MHz) and CRO2935A (2850-3020MHz) in S-band and CRO3335A (3210-3451MHz) and CRO3617A (3515-3720MHz) in C-Band are all designed to meet the high-data-rate applications of point-to-multipoint and terrestrial radios as carrier generators....

Transportable Earth Station Antenna

March 2, 2006 7:00 am | Product Releases | Comments

Andrew Corporation introduces a transportable earth station antenna for military and commercial broadcast use that will operate on virtually any geostationary satellite system. The Andrew 3.9-meter Trifold™ Transportable Earth Station Antenna features quad-band operation and auto acquisition control systems that make it capable of C-, Ku-, Ka- and X-band applications in support of users such as military units, news operations and disast...

Wire-wound Chip Coils

March 2, 2006 7:00 am | Product Releases | Comments

Murata Electronics North America introduces a miniature high-frequency wire-wound chip coil (LQW04A series). The 03015 EI-sized coils (0.8 × 0.4 mm) were developed using advancements in mounting techniques and materials. Murata’s chip coils are suited for high-frequency circuits used in mobile devices such as cell phones and PDAs....

Advertisement

Step-up DC/DC Converters

March 2, 2006 7:00 am | Product Releases | Comments

Semtech introduces the SC4501, SC4502 and SC4502H, a family of current-mode, adjustable-frequency, step-up (boost) converters with an internal 2 A, 40 V switch. Each converter can be adapted in a variety of topologies, such as boost, sepic and flyback, for generating high output voltage from multi-cell alkaline, NiCd, NiMH or single-cell Li-ion batteries....

Variable-gain Amplifier

March 2, 2006 7:00 am | Product Releases | Comments

Analog Devices extends its portfolio of RFICs with an analog-control variable-gain amplifier (VGA) that offers high linearity over a broad frequency range for wireless infrastructure applications, such as cellular basestation radio transceivers. The AD8368 is optimized to maintain dynamic range of basestation radio transceivers, ensuring that both weak and strong incoming call signals are handled and maintained....

Flip Chip Resistors

March 2, 2006 7:00 am | Product Releases | Comments

Vishay Intertechnology announces the VFCP series of precision, surface-mount Bulk Metal Z Foil (BMZF) resistors in a flip-chip configuration. The five VFCP resistors combine power ratings up to 750 mW at 70° C with long-term stability down to ± 0.005 %, typical TCR of ± 0.2 ppm/° C, PCR of ± 5 ppm typical at rated power and tolerance of 0....

EDA Products

March 2, 2006 7:00 am | Product Releases | Comments

ArchPro Design Automation announces two products to aid with multi-voltage design processes. The products allow designers for the first time to verify voltage states and implement voltage states at the push of a button. They combine with ArchPro’s MVSIM product to form the first available complete EDA solution for the entire chain of power management design cycles....

Chipset for Universal HF and UHF RFID Reader Systems

March 2, 2006 7:00 am | Product Releases | Comments

Anadigm® announces the RangeMaster2™— the company's second generation RFID reader 3.3 V chipset solution, which allows system vendors to design and maintain a single "universal" reader that can be customized to read different radio frequency identification (RFID) tag types, with different modulation types and frequencies....

Advertisement

RFIC Simulator

March 2, 2006 7:00 am | Product Releases | Comments

...

C Port Expanders

March 2, 2006 7:00 am | Product Releases | Comments

Cypress Semiconductor introduces three I 2 C port expanders that store all user settings in non-volatile memory, eliminating the need to reconfigure the device after each power-up. The devices deliver up to 60 input/outputs (I/Os) and offer pulse-width modulators (PWMs) and I 2 C-accessible EEPROM memory....

New Router Feature

March 2, 2006 7:00 am | Product Releases | Comments

Nova Engineering announces a new feature for its NovaRoam® Mobile Router product line, called Uni-directional Link Detection and Avoidance (ULDA). NovaRoam Mobile Routers offer long-range, high-speed, secure mobile data communications for public safety, military and remote monitoring and control applications in countries across the globe....

Thick-film Chip Resistor Dividers

March 2, 2006 7:00 am | Product Releases | Comments

Vishay Intertechnology announces the CDHV, a surface mount chip resistor divider with a small size profile that achieves good ratio stability under high voltages. The new resistor divider is designed for use in high-voltage power supplies, power-switching equipment and inverter controls. Manufactured with an alumina substrate, the CDHV is capable of handling voltages up to 3 kV, with a voltage coefficient down to 5 ppm/V....

L-band PA

March 2, 2006 7:00 am | Product Releases | Comments

Aethercomm Model Number SSPA 1.2-1.4-500-RM is a high-power rack-mounted L-band solid-state power amplifier that operates over the 1215 to 1400 MHz L-band radar band. The peak RF power is 55 dBm minimum. Power flatness across the entire band is ± 0.5 dB typical. Minimum small signal gain is 54 dB....

Updates to Online Tool

March 2, 2006 7:00 am | Product Releases | Comments

Gore has added assemblies to its online interactive design guide. The tool now provides a menu of connector options to configure a complete GORE™ High Flex Flat Cable Assembly or GORE™ Trackless Cable Assembly, with ten-day lead times. Gore’s standard connector offerings include: D-sub (standard, high density and combo), BNC, coaxial, IEEE1394, RJ45, CPC and mate-n-lock....

Polished Ceramic Substrates

March 2, 2006 7:00 am | Product Releases | Comments

TT electronics IRC Advanced Film Division has enhanced its thin film microwave circuit capabilities with polished ceramic substrates. Now available in 0.010 inch thickness, the polished substrates reduce propagation delay due to shorter signal paths. Typical applications for the polished ceramic substrates include routers and switches, servers, computers and microwave telecom links, as well as wireless applications....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading