Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Precision Op Amps

November 3, 2003 6:54 am | Product Releases | Comments

Linear Technology announces the LT6220, LT6221 and LT6222 single, dual and quad rail-to-rail input and output precision op amps. Drawing less than 1mA per channel, these 60 MHz op amps increase the operation time of wide bandwidth battery-powered systems without compromising performance. The LT6220/21/22 can operate from supplies as low as 2....

Placement Machine

November 3, 2003 6:54 am | Product Releases | Comments

The Universal Instruments AdVantis™ placement machine builds on the Vantis platform to improve performance and further reduce cost per placement in the mid-range market segment. AdVantis is designed to reduce the cost of entry for manufacturers needing high mix capability, increased speed and greater accuracy....

Computing Platform

November 3, 2003 6:54 am | Product Releases | Comments

Sealevel Systems introduces the Relio™ series. Intended for the OEM, Relio systems combine a PLC with an industrial computer. Relio systems operate over a wide temperature range with no moving parts. The system offers a scalable architecture using PC/104 modules to provide a variety of application-specific I/O options....

Advertisement

DSP Board

November 3, 2003 6:54 am | Product Releases | Comments

Traquair announces the UC1394a-1 multi-chip module in a general-purpose embedded DSP configuration, with supporting EVM-Kits for DSP and embedded image processing applications. It provides developers with a DSP board the size of a coin, with a programmable DSP processor, FPGA, 400MBit/second FireWire communications and a host of I/O capabilities, all in a tiny 30x36mm 116-pin surface mount PLCC package....

Network Emulator

November 3, 2003 6:54 am | Product Releases | Comments

Spirent announces a release of functionality for its AirAccess WCDMA Network Emulator. The AirAccess WCDMA system allows network operators and mobile device manufacturers to verify the performance and interoperability of WCDMA User Equipment (UE) and services using a "network in a box" solution....

Flat Panel Display

November 3, 2003 6:54 am | Product Releases | Comments

The 17 inches rack mount flat panel LDC is an integrated display platform that provides a low-profile, plug-and-play monitor solution. The 17 inches diagonal LCD's viewable area features image quality with .264 mm dot pitch, 250 nits luminance and a contrast ratio of 500:1. the unit itself is 1....

RF Center Probe

November 3, 2003 6:54 am | Product Releases | Comments

Aries introduces a high frequency center probe socket that features a floating guide plate with a built-in hard stop to help protect the probes during rest, and eliminating damage to the package leads. The test socket can be used for packages with a pitch of 0.50 mm pitch or higher for devices up to 55 mm wide in applications with speeds from 1 GHz to over 10 GHz....

Dispensing System

November 3, 2003 6:54 am | Product Releases | Comments

The MicroHead Dispenser lets users set shot sizes in increments of 0.001 ml and has an automatic refill feature to permit continuous, uninterrupted operation. Featuring a controller that prompts the operator to set the shot size, dispensing rate, shot sequence, and time intervals between shots, this positive-displacement, closed-loop system confirms the precise volume of fluid dispensed after each shot....

Advertisement

Tap Switches

November 3, 2003 6:54 am | Product Releases | Comments

Rotary tap switches are available in molded- and fabricated-base designs, and can be configured for either manual or motor operation. With dual (continuous/intermittent) ratings ranging from 100/150 to 1600/2400 amps at 600 volts, they are available in single-, two-, or three-phase models. Options include increased voltage and amperage ratings, angled terminals, key-interlock provisions, auxiliary switches for remote indication, an "OFF...

Cable Tester

November 3, 2003 6:54 am | Product Releases | Comments

The Fault Mapper Pro™ model CA7026 is a handheld graphical Time Domain Reflectometer (TDR) designed for identifying and locating faults on power and communication cables. Model CA7026 measures cable length and indicates the distance to cable faults and terminations, to a range of 11700 ft. The electroluminescent backlit display shows a reflection profile of the cable under test as an oscilloscope-like trace....

PCB Mounts

November 3, 2003 6:54 am | Product Releases | Comments

Sorbothane has developed M3 stud mounts that provide shock mounting and vibration damping for printed circuit boards and other low mass components with limited installation space....

Switching Power Supplies

November 3, 2003 6:54 am | Product Releases | Comments

HiTek Power introduces a family of low-profile 150-watt switching power supplies with a high-output current pulse capability. The TEK 150 series AC/DC power supplies measure 1.5 × 3 × 5 inches and weigh less than a pound. Their U-channel casing allows them to be operated at up to 100 watts without fan cooling or up to 150 watts with forced cooling of 16 cubic feet per minute....

TOPICS:

VCO for Point-to-Point Radios

November 3, 2003 6:54 am | Product Releases | Comments

The V844ME04 generates frequencies between 3790 to 3970 MHz within a control voltage range of 0.5 to 4.5 VDC. The V844ME04 exhibits a spectral purity of – 86 dBc/Hz, typically, at 10 kHz from the carrier, and draws 15 mA typically, from a 5 VDC power supply. This VCO offers 2 ± 1 dBm of output power into a 50Ω load while operating over the temperature range of – 40°C to 85°C....

RF Receivers

November 3, 2003 6:54 am | Product Releases | Comments

...

Control Indicator Module

November 3, 2003 6:54 am | Product Releases | Comments

A Control Indicator Module (CIM) from Electroswitch contains SCADA interface for remote control and monitoring of power circuit breakers and reclosers. Switches on the unit's front panel permit manual control when needed. The unit's RS-485 interface allows the use of DNP 3.0, Modbus, or other compatible communications protocols....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading