Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Laser Diode Modules

November 3, 2003 6:54 am | Product Releases | Comments

California Eastern Laboratories announces two 10 mW DFB Laser Diode Modules from NEC. The NX8563LA Series modules feature an extended – 20 to +85°C temperature range and, under small signal modulation conditions, bandwidth that exceeds 2.5 GHz. The NX8563LA Series lasers are suited for digital transmission at 1550 nm....

Half Duplex Emulator

November 3, 2003 6:54 am | Product Releases | Comments

Critical Technologies announces the Half Duplex Link Emulator. Designed for use in the military and private wireless radio and communications lab environment, the Emulator provides high assurance and repeatability in testing and validation procedures. Operating in identical pairs, the Link Emulators ensure one-way traffic, and graphically represent data collisions via LEDs, allowing for reliability and verifiability in the testing and analy...

USB Adapters

November 3, 2003 6:54 am | Product Releases | Comments

Recent developments in the PSA-05R Series adapters from Phihong provide custom solutions for portable electronics OEMs. The adapter features a USB socket which allows the data cable to charge a portable device. The USB output adapter is designed to support USB power specification 4.75 to 5.25V @ 500mA and has a range input from 90 to 265 VAC....

Advertisement

SMA Couplers

November 3, 2003 6:54 am | Product Releases | Comments

MECA introduces the 780 series, miniature, 50-watt, stripline directional couplers suited for applications between 500 MHz and 18 GHz where precise power monitoring, external leveling, signal mixing or swept transmission and reflection measurements are necessary. Nominal coupling values of 10, 20 and 30 dB are standard....

Rotary Thermoformer

November 3, 2003 6:54 am | Product Releases | Comments

Kintz Plastics introduces a four-station, rotary thermoformer capable of forming parts up to 9 feet wide by 13 feet long by 5 feet deep from a single sheet of plastic. Thermoforming is the process of molding a single sheet of plastic – using heat, vacuums and pressure — into a specific shape and dimension....

Field Bus Connectors

November 3, 2003 6:54 am | Product Releases | Comments

ERNI announces cage clamp connection options for its ProfiBus and CanBus series field bus connectors. The connector contains a latching spring clip, which makes for easy, quick connection — open the clip, insert the wire or stranded core, and close the clip. The range of cross sections from 0....

Linear RF Amplifier

November 3, 2003 6:54 am | Product Releases | Comments

Offering a high IP3 of +58 dBm, the NP-504 amplifier is designed for highly linear performance across the 100 to 500 MHz band. Typical P-1dB power is 150 watts, with a saturated power of 200 watts. Gain is 50 dB and flatness is rated at ± 1 dB. Suggested applications are Multi-carrier, Pulse or AM FM modulation....

Multipole Connectors

November 3, 2003 6:54 am | Product Releases | Comments

Anderson Power Products offers the SB350 multipole connector. The SB350 connector has spring-loaded, silver-plated contacts that create a self-wiping action during mating and unmating. This hermaphroditic connector is rated at 350 amps, 600 volts and has continuous AC and DC operation. The SB350 can accommodate cable sizes of 2/0 (AWG) / 67....

Advertisement

Crosspoint Switches

November 3, 2003 6:54 am | Product Releases | Comments

Maxim introduces the MAX9392/MAX9393 dual, high-performance, 2 × 2 LVDS crosspoint switches. The MAX9392 accepts LVDS, HSTL, and other GND-referenced input signals. The MAX9393 accepts LVPECL, CML, and other Vcc-referenced differential input signals. Each channel is independently programmed to any input or both outputs, allowing each channel to be configured as a 1:2 splitter, a 2:1 multiplexer, dual repeater, or a 2 × 2 crosspoint ...

Solid State Power Amplifier

November 3, 2003 6:54 am | Product Releases | Comments

OPHIR RF Model 5156 is a 500 W solid state power amplifier with a frequency band of 0.8 to 2.5 GHz. Designed for TWTA replacement in Military and Automotive EMC RF immunity testing, Model 5156 provides linear P1dB power of 400W, small signal gain of +58 dBm, gain flatness of ± 2dB and a low noise figure of +15 dB....

Linear Amplifier Module

November 3, 2003 6:54 am | Product Releases | Comments

Designed primarily for the point to multipoint fixed wireless access market, Model 5302055 is a small, lightweight, highly linear amplifier module and has a minimum small signal gain of 34dB and 1.5 watts of linear output power. Running from a single DC voltage of 13 volts, and able to withstand input overdrive of +20 dBm, this module has dimensions of 3 × 2....

Board Stacking Connector

November 3, 2003 6:54 am | Product Releases | Comments

AVX introduces the MMA™ SMT board stacking connector, designed to maximize high speed signal integrity and high pin count SMT capabilities. MMA connectors are designed for applications in communication, medical, technological and research markets, supporting a system bandwidth in excess of 5 GHz....

ISM Band Transceiver

November 3, 2003 6:54 am | Product Releases | Comments

Xemics introduces the XE1203 ISM band transceiver which operates in the 433 MHz, 868 MHz and 915 MHz ISM bands. The XE1203 can transmit and receive data from 1.2 kbps up to 153.2 kbps, RF output power can be programmed up to +15dBm (31.5 mW) and the current consumption while in reception mode is 14mA....

Shielding Technology

November 3, 2003 6:54 am | Product Releases | Comments

Maxwell Technologies introduces Rad-Stak™, radiation shielding technology that utilizes stacked packaging to create fully space-qualified components. Rad-Stak is a completely shielded multi-level die package, created out of the Rad-Pak® shielded packaging solution to vertical stacking. In this configuration, heat is dissipated through the interconnects and the lid/heat sink of each layer....

Terminal Blocks

November 3, 2003 6:54 am | Product Releases | Comments

Tusonix's UL recognized filtered terminal blocks have an increased current up to 30 Amps with a working voltage of 150 VDC and capacitance values up to 15,000 pF. These filtered terminal blocks eliminate EMI at a critical point in the circuit without increasing component count or adding solder connections....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading