Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Noise Diodes

February 2, 2006 9:20 am | Product Releases | Comments

NoiseWave announces the NW-Diode series broadband noise diodes. These noise diodes offer a symmetrical white Gaussian noise voltage distribution while maintaining a flat power spectral density versus frequency response. The series covers the frequency range 0.1 Hz to 11 GHz with high output ENR. The series is available in the following versions: axial leaded version for audio frequency applications; surface mount version for higher frequenc...

Clock Generator Devices

February 2, 2006 9:20 am | Product Releases | Comments

Lattice Semiconductor Corporation announces its ispClock™ second generation family of enhanced zero-delay clock generators, the ispClock5600A devices, along with the first device, the ispClock5620A. The programmable, E 2 CMOS®-based ispClock5620 devices can generate up to 20 clock outputs, each with independently programmable output skew, I/O standard and frequency selection....

GaAs DPDT Switch

February 2, 2006 9:20 am | Product Releases | Comments

M/A-COM introduces a RoHS-compliant DPDT switch for applications that require ultra high power handling, low insertion loss and high isolation. The MASWSS0184 is a high power switch that maximizes system linearity performance while reducing DC Power consumption. The MASWSS0184 switch is designed for 802....

Advertisement

UHF IDIC Demo Kit

February 2, 2006 9:20 am | Product Releases | Comments

Atmel® announces the UHF RFID long-range demo kit for the evaluation of its TAGIDU™ IDIC® ATA5590. The demo kit supports a broad range of applications including (intelligent) logistics, supply chain management, anti-counterfeiting, medical and more. The demo kit allows operating distances of up to 12 meters, enabled by the asynchronous low-power design architecture and the PSK-modulation feature in the return link (backscatter)....

Wireless USB Hub Reference Design

February 2, 2006 9:20 am | Product Releases | Comments

Wisair announces a Wireless Universal Serial Bus (WUSB) reference design. The reference design includes a WUSB PC dongle and a WUSB hub, providing consumer electronics and peripheral manufacturers with the means to offer customers wireless connectivity to existing USB-enabled devices. Printers, scanners, remote hard disks, digital cameras and cellular devices are able to plug directly into the WUSB Hub and receive wireless connectivity to a...

Stand-alone Analog Front End

February 2, 2006 9:20 am | Product Releases | Comments

Microchip Technology Inc. announces a stand-alone, analog front end (AFE) for smart, low frequency (125 kHz typical) wireless authentication applications. The MCP2030 device is a 3-channel transponder AFE that provides programmable antenna tuning and adjustable modulation depth that runs as low as 8%....

BNC and TNC Fixed Attenuators

February 2, 2006 9:20 am | Product Releases | Comments

Link Microtek introduces two series of coaxial fixed attenuators that feature stainless-steel connectors for longer life. Appropriate for use in commercial wireless infrastructure applications, the Narda Microwave AF-BNC and AF-TNC series attenuators are particularly suitable for impedance matching or as a buffer to prevent interaction between two devices....

Software-defined Radio

February 2, 2006 7:49 am | Product Releases | Comments

Lexycom Technologies announces the Tiamis-800 — a data-diverse, 824 to 960 MHz, OEM, software-defined radio. The Tiamis-800 is a fully digital, user-programmable data transceiver that utilizes FHSS technology. With adjustable RF channel data communication speeds of up to 1 Mb/s and user selectable frequency channels, the Tiamis-800 is able to provide fast wireless communications in complex environments....

Advertisement

L-band GaAs HJ-FETs

February 2, 2006 7:49 am | Product Releases | Comments

CEL announces two GaAs HJ-FETs from NEC. Designed for use as LNAs and driver amplifiers in satellite radio antennas, GPS antennas and other L-band applications, the NE3508M04 and NE3509M04 deliver low noise and high associated gain. Ideal for use as a first stage amplifier, the NE3509M04 features a 0....

Quad PIN Diode Attenuators

February 2, 2006 7:49 am | Product Releases | Comments

Avago Technologies introduces a series of pi-connected quad PIN (positive-intrinsic-negative) diodes in lead-free, SOT-25 surface-mount packages. These matched quads simplify the design and lower the costs of voltage-controlled diode pi attenuators operating over the 300 kHz to 3 GHz frequency range....

Smart Antenna Module

February 2, 2006 7:49 am | Product Releases | Comments

The A1035-C is the commercial version of Tyco’s new smart antenna module. The new module optimizes, on one carrier, the combination of Tyco's A1029-A GPS module and of the RangeStar embedded GPS antenna. With a board-to-board or cable connector, the A1035-C can be used either in complete system designs or special antenna housings....

Schottky Barrier Rectifier

February 2, 2006 7:49 am | Product Releases | Comments

Vishay announces Schottky barrier rectifiers based on Trench MOS technology. Useful as rectification circuits or OR-ing diodes in redundant switchmode power supplies, or to replace synchronous rectification solutions, the five TMBS™ devices feature low forward voltage drop. The VTS40100CT, packaged in a TO-220AB case that is rated for 40 A (2 × 20 A) and 100 V, is optimized for 100 to 300 W high-frequency switchmode power supply app...

Handheld VNAs

February 2, 2006 7:49 am | Product Releases | Comments

Anritsu Company introduces the VNA Master MS2024A and MS2026A, handheld Vector Network Analyzers (VNAs) that can make vector corrected 1-port and 1-path 2-port measurements from 2 MHz to 6 GHz. The products provide wireless professionals with the performance and analysis tools necessary to successfully deploy, verify and troubleshoot today’s military and commercial wireless networks....

TriQuint Opens New England Design Center

February 2, 2006 7:48 am | Product Releases | Comments

TriQuint Semiconductor, Inc. announces the opening of a new design and support center in Chelmsford, Massachusetts. The facility, known as the New England Design Center (NEDC), is part of TriQuint’s ongoing efforts to work more closely with strategic partners and customers on development of next generation wireless modules and components....

RF Switches

February 2, 2006 7:43 am | Product Releases | Comments

The first devices to be released on the HaRP-enhanced UltraCMOS process are the PE42672 SP7T and the PE42660 SP6T RF switches, designed for quad-band GSM and GSM/WCDMA handset applications. Since the mid-1990s, integration, standardization and modularization have provided the GSM handset industry a roadmap of reduced size, increased performance and reduced cost....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading