Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Amplifier Features Noise Figure of 0.55 dB

October 9, 2008 6:03 am | Product Releases | Comments

Mini-Circuits unveils its ultra-low noise ZX60-0916LN+ amplifier that has a noise figure of 0.55 dB while delivering 18 dB gain and a high output power of up to 16.5 dBm. Reliable and packaged in a rugged Unibody housing and using SMA connectors, these amplifiers can be used in a range of applications from 824 MHz to 960 MHz, including CDMA: 824 to 894 MHz, GSM Rx: 880 to 915 MHz and GSM Tx: 925 to 960 MHz....

GaAS FET Amplifier for Digital Video Broadcast Apps

October 9, 2008 6:03 am | Product Releases | Comments

Stealth Microwave, Inc. introduces its Model SM7175-43 7.1 to 7.5 GHz solid state GaAs FET amplifier for European digital video broadcast applications. The amplifier provides 58 dB of linear gain with a P1 dB of 43 dBm. It is available in modular form (standard), as a lab unit or in a 19? rack-mount form....

Interface Module Provides Simple Analog Signal Conversion

October 9, 2008 6:03 am | Product Releases | Comments

Turck, Inc. introduces its IMS interface module that provides a cost-effective solution for analog signal conversion. The module's profile measures 6.2 mm wide. Along with signal conversion, this compact module conditions and isolates signals from external sources, making it effective in industries where electrical noise is commonplace....

Advertisement

L-Band VCO Exhibits Low Phase Noise

October 9, 2008 6:03 am | Product Releases | Comments

Z-Communications, Inc. announces its Model CLV1295A-LF RoHS compliant VCO in L-band that operates from 1,235 to 1,355 MHz with a tuning voltage range of 0.50 to 4.50 V DC. The VCO features a typical phase noise of -105 dBc/Hz at 10 kHz offset and a typical tuning sensitivity of 68 MHz/V. It delivers a typical output power of 5 dBm at a 5 V DC supply while drawing 26 mA (typical) over the temperature range of -40°C to 85°C....

High Performance Connector Creates Rugged Cable Assemblies

October 9, 2008 6:03 am | Product Releases | Comments

San-tron, Inc. announces its Model eSMA high performance connector to address the problems of signal transmission and fragility of solder joints in hand-formable cable assemblies. This connector features an extended ferrule and enhanced performance from an internal design. It also features failure-proof coupling nuts; EZ style, solder free, captivated center contacts; and a solder damming positive cable stop....

SMT Fuse Features Extended Current Ratings

October 9, 2008 6:03 am | Product Releases | Comments

Schurter announces several new current ratings to its UMT 250 Series of SMT fuses for a total of 22 ratings from 80 mA to 10 A. The series provides over-current and short-circuit protection in both primary and secondary circuits. The versatile one-package solution streamlines design, procurement and automated assembly processes....

Single Test System Encompasses Entire LTE Protocol

October 9, 2008 6:03 am | Product Releases | Comments

Setcom Wireless announces its S-CORE conformance and research test environment for LTE (long term evolution) protocol testing and monitoring. S-CORE is a protocol tester for LTE signaling that is easy to use, it provides clear diagnostic information, and it leverages off-the-shelf hardware to reduce capital expense....

Arbitrary Waveform Generators Provide Performance Boost

October 9, 2008 6:03 am | Product Releases | Comments

Tektronix, Inc. announces its AWG7000B and AWG5000B Series of arbitrary waveform generators (AWG). The AWG B series provides a 20% performance boost over many of the prior AWG instruments, and it meets the test needs for high-speed serial data buses and wideband RF applications. With 9.6 GHz effective RF output, 10-bit resolution, and sample rates up to 24 GS/s, the AWG7000B produces high-speed serial waveforms with real life imperfections ...

Advertisement

High Linearity Switch for WLAN and Bluetooth Markets

October 9, 2008 6:03 am | Product Releases | Comments

Tyco Electronics M/A-COM unveils its Model MASW-008955 DC to 3.5 GHz SP3T RoHS-compliant switch for applications that require high linearity, low insertion loss and fast settling time over a wide frequency range in an ultra-small package size. Typical applications include filter and antenna switching in WLAN or Bluetooth systems that connect separate receive functions to a common antenna....

Oscillator Features Low Power Consumption

October 9, 2008 6:03 am | Product Releases | Comments

VIDA Products introduced its Model V10 oscillator that features low power consumption and less than -140 dBc/Hz at 1 MHz offsets. Frequency ranges are 6 to 13 GHz, 7 to 15 GHz and 8 to 18 GHz....

HBT Chip Delivers High Peformance

October 9, 2008 6:03 am | Product Releases | Comments

California Eastern Labs introduces the NESG303100G SiGe HBT chip from NEC for engineers whose designs can benefit from the use of die. The chip is produced using NEC’s 110 GHz fT silicon germanium processing technology. Suitable for both oscillator and LNA applications in 2.4 to 5.8 GHz mobile communications designs, specifications include high breakdown voltage of 5 V and hFE from 220 to 380....

SSOP Optocouplers Offer a Combination of Features

October 9, 2008 6:03 am | Product Releases | Comments

Everlight Electronics Co. Ltd. introduces its EL3H7-G Series of four-pin SSOP photo-transistor optocouplers with a combination of key specifications that include a low-profile (2 mm) package, high isolation voltage (3,750 Vrms), minimum creepage distance (5 mm), wide operating temperature range (-55°C to 110°C), multiple current-transfer-ratio (CTR) bins and high breakdown voltage (80 V)....

MMIC Multiplier Uses GaAs PHEMT Technology

October 9, 2008 6:03 am | Product Releases | Comments

Hittite Microwave Corporation introduces its Model HMC598 GaAs MMIC Active x2 Frequency Multiplier chip which allows radio designers to achieve continuous output frequency coverage from 22 to 46 GHz. This multiplier also provides optimal fundamental and sub-harmonic suppression in clock generation, point-to-point radio, military and space, VSAT and test equipment applications....

Silicon Protection Arrays Protect Against ESD Surges

October 9, 2008 6:03 am | Product Releases | Comments

Littelfuse, Inc. announced its SP3000 Series of electrostatic discharge (ESD) over-voltage suppression devices for data lines and interface circuits in a range of equipment. Applications include PCs and PC peripherals, hand-held devices, adapter cards and data communications equipment, including USB2....

Small Audio Subsystem Provides High Output Power

October 9, 2008 6:03 am | Product Releases | Comments

Maxim Integrated Products introduces the MAX9877, a small audio subsystem that combines a high-efficiency, high-power, mono Class D speaker amplifier, a DirectDrive, stereo headphone amplifier and a low-noise, bypass analog switch. In addition to this integration, the device uses a proprietary third-generation, ultra-low EMI Class D amplifier technology to provide Class AB audio performance with Class D efficiency....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading